bluew
1ddf10447c
Merge branch 'control-pulp' into master
2022-06-17 16:03:01 +02:00
bluew
07c26b52ac
pulp-runtime/control-pulp: Use priv_1_12
2022-06-10 18:54:00 +02:00
aottaviano
1294f4956b
pulp-runtime: Add idma APIs
...
* Add idma archi and hal sources
* Switch with mchan is still manual
2022-06-01 13:42:02 +02:00
aottaviano
77fa6799ed
pulp-runtime: Add kairos target
2022-05-17 08:41:20 +02:00
Corrado Bonfanti
18ab940220
Add AVS BUS support and basic test
...
* Add configuration register to set AVS mode
* Add connections to the SPI controller and txrx interface
* Set idle level of sdio[0] signal of SPI master to '1', according to
the AVS protocol
* Add SPI slave device capability to trigger an event for requesting a read from
master by driving low the MISO (SDATA for AVS) when AVS mode is set.
This happens during tx/rx idle phases
* Add basic Write commit/Read test with pulp-runtime. AVS slave is
simulated in tb_avs.sv and tb_avs_fpga.sv.
2022-02-10 20:03:42 +01:00
aottaviano
735f29948c
treewide: Fix I2C slave module and testsuite
...
* Fix wrong signals in RTL hierarchy
* Add I2C slv tb for FPGA wrapper (dump test)
* Add I2C slv tb for ASIC wrapper (irq test)
* Add dump and irq tests
Please enter the commit message for your changes. Lines starting
2021-12-21 09:45:00 +01:00
bluew
0f4e0e588d
pulp-runtime/control-pulp: Fix vector base set and get
...
So that rt_irq_set_fc_vector_base() and co. pick the correct
implemention using csr mtvec.
2021-11-23 11:01:00 +01:00
bluew
026a98d56a
pulp-runtime: Fix uart frequency and bad fll access
...
Control-pulp doesn't have an FLL so we hardcode the frequency domain
values. Furthermore we allow these hardcoded values to change depending
on whether we target the FPGA (zcu102) or rtl sim.
2021-11-04 17:47:57 +01:00
Michael Rogenmoser
b45d16cdd2
Update UDMA configuration in line with pulp-open
2021-09-21 16:51:02 +02:00
aottaviano
3829557a94
include/archi: Fixes for I/O in control-pulp
2021-07-25 19:53:51 +02:00
aottaviano
8380fbdc6b
archi: Fix HW Loops encoding for pulp and pulpissimo with cv32e40p
2021-07-20 16:05:02 +02:00
Luca Valente
8891d83838
target: Add pulp with cv32e40p
2021-07-20 16:04:59 +02:00
Luca Valente
9eba7de59a
target: Add pulpissimo with cv32e40p
2021-07-20 16:03:12 +02:00
aottaviano
eafea63a1e
chips/control_pulp: Overhaul header inclusion for control_pulp
2021-07-19 12:14:04 +02:00
bluew
768f79d507
Add support for control-pulp
2021-07-13 17:33:01 +02:00
Manuel Eggimann
763fa6f72b
Add SOC_FREQUENCY to fpga specific runtime configuration
2021-06-24 22:01:49 +02:00
Michael Rogenmoser
babf8b1c4e
Add ibex compatibility to pulpissimo
2021-01-22 17:52:42 +01:00
Michael Rogenmoser
c3cfcb45e4
Add ibex performance counters
2021-01-04 11:38:39 +01:00
Germain Haugou
280f5755ed
Fix for setting frequency on fpga
2020-03-05 15:18:06 +01:00
Germain Haugou
0540056eaa
Few fixes to have riscv-tests/testIRQ working on pulpissimo
2020-02-06 13:26:14 +01:00
Germain Haugou
5ef7ff3157
Few fixes to be able to use runtime without FC on pulp-open
2020-01-20 21:24:53 +01:00
Germain Haugou
af8452d703
Added support for marsellus
2020-01-14 11:45:23 +01:00
Germain Haugou
c26ac524ce
Now able to set fpga frequency from command line
2019-12-19 16:13:30 +01:00
Germain Haugou
31052776f8
Added runner
2019-12-17 22:14:17 +01:00
Germain Haugou
fa62145237
Few fixes
2019-12-15 17:33:38 +01:00
Germain Haugou
8b884c9667
Initial commit
2019-12-15 14:12:22 +01:00
