xous-core/services/root-keys/locales/i18n.json
2023-08-11 17:10:47 +08:00

562 lines
36 KiB
JSON
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{
"rootkeys.already_init": {
"en": "Device keys already initialized.",
"en-tts": "Device keys already initialized.",
"fr": "Clés de l'appareil déjà initialisées",
"ja": "ルートキーはすでに初期化されています。",
"zh": "根密码已经设置"
},
"rootkeys.backup_badpass": {
"en": "Password incorrect.\n\nPlease try again, or reboot by inserting a paperclip in the hard reset hole.",
"en-tts": "Password incorrect.\n\nPlease try again, or reboot by inserting a paperclip in the hard reset hole.",
"fr": "Mot de passe incorrect.\n\nVeuillez réessayer ou redémarrer en insérant un trombone dans le trou de réinitialisation.",
"ja": "正しくないパスワード。 バックアップを中止します!",
"zh": "密码错误。 中止备份!"
},
"rootkeys.backup_key": {
"en": "This is your backup key:\nWRITE IT DOWN, KEEP IT SECRET.",
"en-tts": "This is your backup key:\nWRITE IT DOWN, KEEP IT SECRET.",
"fr": "Voici votre clé de sauvegarde:\nÉCRIS-LE, GARDE-LE SECRET.",
"ja": "これがバックアップキーです:\n書き留めて、秘密にしてください。",
"zh": "这是您的备份密钥:\n写下来,保密。"
},
"rootkeys.backup_key_enter": {
"en": "Please enter your backup key now:",
"en-tts": "Please enter your backup key now:",
"fr": "Veuillez entrer votre clé de sauvegarde maintenant:",
"ja": "今すぐバックアップキーを入力してください:",
"zh": "请立即输入您的备份密钥:"
},
"rootkeys.backup_key_match": {
"en": "Backup key entered correctly!",
"en-tts": "Backup key entered correctly!",
"fr": "Clé de sauvegarde saisie correctement!",
"ja": "バックアップキーが正しく入力されました!",
"zh": "备份密钥输入正确!"
},
"rootkeys.backup_key_mismatch": {
"en": "Backup key did not match.\n\nThis is your backup key, again:",
"en-tts": "Backup key did not match. This is your backup key, again:",
"fr": "La clé de sauvegarde ne correspond pas.\n\nCeci c'est la clé de sauvegarde, encore:",
"ja": "バックアップキーが一致しませんでした。\n\nこれもバックアップキーです:",
"zh": "备份密钥不匹配。\n\n这是您的备份密钥,再次:"
},
"rootkeys.backup_prepwait": {
"en": "Preparing backup state...",
"en-tts": "Preparing backup state...",
"fr": "Préparation de l’état de sauvgarde...",
"ja": "バックアップの準備中...",
"zh": "正在准备备份..."
},
"rootkeys.backup_staged": {
"en": "Backup data is prepared; PDDB is unmounted.\nConnect to a host computer by USB, and download the backup data bundle.\nScan the QR code for instructions:",
"en-tts": "Backup data is prepared. You may now connect to a host computer and download the backup data bundle.",
"fr": "Les données de sauvegarde sont préparées; PDDB est démonté.\nConnectez-vous à un ordinateur hôte par USB et téléchargez le pack de données de sauvegarde.\nBalayez le code QR pour obtenir des instructions:",
"ja": "バックアップデータを用意します。 これで、ホストコンピューターに接続して、バックアップデータバンドルをダウンロードできます。",
"zh": "备份数据已准备好。 您现在可以连接到主机并下载备份数据包。"
},
"rootkeys.backup_staging_error": {
"en": "Internal error performing backup. Process aborted.",
"en-tts": "Internal error performing backup. Process aborted.",
"fr": "Erreur interne lors de la sauvegarde. Processus abandonné.",
"ja": "バックアップの実行中に内部エラーが発生しました。 プロセスが中止されました。",
"zh": "执行备份的内部错误。 进程中止。"
},
"rootkeys.backup_verify": {
"en": "Would you like to verify that you wrote the backup key down correctly by re-entering it now?",
"en-tts": "Would you like to verify that you wrote the backup key down correctly by re-entering it now?",
"fr": "Voulez-vous vérifier que vous avez bien écrit la clé de sauvegarde en la saisissant de nouveau maintenant?",
"ja": "今すぐ再入力して、バックアップキーを正しく書き留めたことを確認しますか?",
"zh": "您想通过现在重新输入来验证您是否正确记下了备份密钥吗?"
},
"rootkeys.backup_waiting": {
"en": "⚠ System in backup mode! ⚠\nTo resume normal function, either initiate a backup via USB, or reboot the device.",
"en-tts": "System in backup mode! To resume normal function, either initiate a backup via USB, or reboot the device.",
"fr": "⚠ Système en mode de sauvegarde! ⚠\nPour reprendre le fonctionnement normal, lancez une sauvegarde via USB ou redémarrez l’appareil.",
"ja": "⚠ システムはバックアップモードです! ⚠\n通常の機能を再開するには、USB 経由でバックアップを開始するか、デバイスを再起動してください。",
"zh": "⚠ 系统处于备份模式! ⚠\n要恢复正常功能,请通过 USB 启动备份,或重新启动设备。"
},
"rootkeys.bad_password_request": {
"en": "Someone issued a request for a non-existent password.",
"en-tts": "Someone issued a request for a non-existent password.",
"fr": "Quelqu’un a demandé un mot de passe inexistant.",
"ja": "誰かが存在しないパスワードのリクエストを発行しました。",
"zh": "有人发出不存在密码的请求。"
},
"rootkeys.bbram.confirm": {
"en": "Connect provisioning helper, then press enter. Refer to https://github.com/betrusted-io/betrusted-wiki/wiki for details.",
"en-tts": "Connect provisioning helper then press enter. Refer to https://github.com/betrusted-io/betrusted-wiki/wiki for details.",
"fr": "Connectez l’assistant d’approvisionnement, puis appuyez sur Entrée. Reportez-vous à https://github.com/betrusted-io/betrusted-wiki/wiki pour plus de détails.",
"ja": "プロビジョニングヘルパーを接続し、Enterキーを押してください。詳しくは、https://github.com/betrusted-io/betrusted-wiki/wiki を参照してください。",
"zh": "立即连接配置助手。请参阅 https://github.com/betrusted-io/betrusted-wiki/wiki 了解详情。"
},
"rootkeys.bbram.failed_restore": {
"en": "Something went wrong. Restoring from backup... ",
"en-tts": "Something went wrong, restoring from backup.",
"fr": "Quelque chose a mal tourné. Restauration de sauvegarde... ",
"ja": "何かがうまくいきませんでした。 バックアップからの復元中です...",
"zh": "出了点问题,从备份中恢复..."
},
"rootkeys.bbram.finished": {
"en": "BBRAM helper should have rebooted the device. If not, please reset the device by inserting a pin into the hard reset hole.",
"en-tts": "BBRAM helper should have rebooted the device. If not, please reset the device by inserting a pin into the hard reset hole.",
"fr": "BBRAM helper aurait dû redémarrer l’appareil. Il y avait un problème avec la procédure!",
"ja": "BBRAMヘルパーはデバイスをリブートしたはずです。手順に問題がありました!",
"zh": "BBRAM 助手应该已经重启了设备。 程序有问题!"
},
"rootkeys.bbram.no_helper": {
"en": "No BBRAM helper found. Refer to https://github.com/betrusted-io/betrusted-wiki/wiki for help.",
"en-tts": "No BBRAM helper found. Refer to https://github.com/betrusted-io/betrusted-wiki/wiki for help.",
"fr": "Aucun assistant BBRAM trouvé. Consultez https://github.com/betrusted-io/betrusted-wiki/wiki pour obtenir de l’aide.",
"ja": "BBRAMヘルパーが見つかりませんでした。https://github.com/betrusted-io/betrusted-wiki/wiki を参照してください。",
"zh": "没有找到 BBRAM helper。参考https://github.com/betrusted-io/betrusted-wiki/wiki。"
},
"rootkeys.blind_update": {
"en": "No device keys detected. Shall we copy the staged gateware anyways, overwriting the current image?",
"en-tts": "No device keys detected. Shall we copy the staged gateware anyways, overwriting the current image?",
"fr": "Aucune clé de l'appareil détectée. Devons-nous copier le gateware mis en scène de toute façon, écrasant l’image actuelle?",
"ja": "ルートキーが検出されませんでした。 とにかくステージングされたゲートウェアをコピーして、現在のイメージを上書きしませんか?",
"zh": "未检测到根密钥。 我们是否要复制暂存的网关软件,覆盖当前映像?"
},
"rootkeys.confirm": {
"en": "🔐 Setup passwords for Precursor 🔐\n\nYou will be prompted for a root passphrase that must be secure and cannot be changed.\n\nAre you ready?",
"en-tts": "Setup passwords for Precursor\n\nYou will be prompted for a root passphrase that must be secure and cannot be changed.\n\nAre you ready?",
"fr": "🔐 Configurer les mots de passe pour Precursor 🔐\n\nOn vous demandera un mot de passe racine qui doit être sécurisé et ne peut pas être modifié.\n\nVoulez-vous continuer?",
"ja": "🔐 Precursor のパスワードを設定する 🔐\n\nルート パスフレーズの入力を求めるメッセージが表示されます。ルート パスフレーズは安全である必要があり、変更することはできません。\n\n準備はできていますか?",
"zh": "🔐 为 Precursor 设置密码 🔐\n\n系统将提示您输入必须安全且无法更改的根密码。\n\n您准备好了吗?"
},
"rootkeys.confirm.dont_ask": {
"en": "Stop bothering me; I know what I'm doing.",
"en-tts": "Stop bothering me; I know what I'm doing.",
"fr": "Arrête de me déranger, je sais ce que je fais.",
"ja": "二度と気にしないで",
"zh": "不要再打扰我了"
},
"rootkeys.confirm.no": {
"en": "Not yet, maybe later.",
"en-tts": "I'll try again after inspecting my device.",
"fr": "Pas encore, peut-être plus tard.",
"ja": "まだです、多分後で。",
"zh": "我先检查一下,稍后再试"
},
"rootkeys.confirm.yes": {
"en": "I'm ready!",
"en-tts": "I'm ready!",
"fr": "Je suis prêt(e)",
"ja": "準備OK!",
"zh": "确定"
},
"rootkeys.console_input": {
"en": "Communicating with helper... Press enter to abort.",
"en-tts": "Communicating with helper. Press enter to abort.",
"fr": "Communiquer avec l'assistant... Appuyez sur Entrée pour annuler.",
"ja": "ヘルパーと通信しています... Enterキーを押して中止します。",
"zh": "与助手通信,按 Enter 中止"
},
"rootkeys.efuse_burning": {
"en": "eFuse key burning...",
"en-tts": "eFuse key burning...",
"fr": "Gravure de clé eFuse...*MT*",
"ja": "eFuse キーの書き込み中...",
"zh": "eFuse 密钥烧毁..."
},
"rootkeys.efuse_burn_fail": {
"en": "eFuse key failed to burn!",
"en-tts": "eFuse key failed to burn!",
"fr": "La clé eFuse n'a pas pu être gravée !*MT*",
"ja": "eFuse キーの書き込みに失敗しました!",
"zh": "eFuse key 烧录失败!"
},
"rootkeys.efuse_finished": {
"en": "eFuse burning success!\n\nReboot the device using the paperclip method to ensure new keys are loaded.",
"en-tts": "eFuse burning success!\n\nReboot the device using the paperclip method to ensure new keys are loaded.",
"fr": "Gravure eFuse réussie !\n\nRedémarrez l'appareil à l'aide de la méthode du trombone pour vous assurer que les nouvelles clés sont chargées. *MT*",
"ja": "eFuse の書き込みに成功しました!\n\nペーパークリップを使用してデバイスを再起動し、新しいキーがロードされていることを確認してください。",
"zh": "eFuse 烧录成功!\n\n使用回形针方法重启设备以确保加载新密钥。"
},
"rootkeys.efuse_internal_error": {
"en": "Internal error in eFuse routine",
"en-tts": "Internal error in eFuse routine",
"fr": "Erreur interne dans la routine eFuse*MT*",
"ja": "eFuse ルーチンの内部エラー",
"zh": "eFuse 例程中的内部错误"
},
"rootkeys.efuse_jtag_fail": {
"en": "JTAG failed self-test. Aborting eFuse burn.\n\nPlease ensure that the Pi debug HAT is not attached!",
"en-tts": "JTAG failed self-test. Aborting eFuse burn.\n\nPlease ensure that the Pi debug HAT is not attached!",
"fr": "JTAG a échoué à l'autotest. Abandon de la gravure eFuse.\n\nVeuillez vous assurer que le HAT de débogage Pi n'est pas connecté ! *MT*",
"ja": "JTAG がセルフテストに失敗しました。 eFuse の書き込みを中止しています。\n\nPi デバッグ HAT が接続されていないことを確認してください!",
"zh": "JTAG 自检失败。 中止 eFuse 刻录。\n\n请确保未连接 Pi 调试 HAT!"
},
"rootkeys.efuse_sealing": {
"en": "eFuse sealing device FOREVER...",
"en-tts": "eFuse key burning...",
"fr": "Dispositif d'étanchéité eFuse pour toujours...*MT*",
"ja": "eFuseシーリング装置を永遠に...",
"zh": "eFuse密封装置永远..."
},
"rootkeys.efuse_seal_fail": {
"en": "eFuse sealing failed!",
"en-tts": "eFuse sealing failed!",
"fr": "Échec de l'étanchéité du fusible !*MT*",
"ja": "eFuse シーリングに失敗しました!",
"zh": "eFuse 密封失败!"
},
"rootkeys.get_login_password": {
"en": "Password request\nEnter the 'unlock' PIN code.",
"en-tts": "Enter device unlock password to access basic service.",
"fr": "Demande de mot de passe\nEntrer le code PIN de déverrouillage.",
"ja": "パスワード要求\nデバイスのロック解除のPINコードを入力してください。",
"zh": "输入密码 解锁 安全含义:低"
},
"rootkeys.get_signing_password": {
"en": "⚠ Critical password request ⚠\nEnter the 'root' passphrase.\n\nThis will digitally sign your system firmware.",
"en-tts": "Enter root password, in order to authorize a gateware update.",
"fr": "⚠ Demande de mot de passe essentiel ⚠\nSaisissez la phrase de passe 'racine'.\n\nCela signera numériquement le firmware de votre système.",
"ja": "重要なパスワード要求\nROOTのパスフレーズを入力してください。\n\nこれにより、システムのファームウェアに電子署名が施されます。",
"zh": "输入密码 ROOT 安全含义:至关重要 "
},
"rootkeys.get_update_password": {
"en": "⚠ Critical password request ⚠\nEnter the 'root' passphrase. This authorizes a system update.",
"en-tts": "Enter root password, in order to authorize a gateware update.",
"fr": "⚠ Demande de mot de passe essentiel ⚠\nSaisissez la phrase de passe 'racine'. Cela autorise une mise à jour du système",
"ja": "重要なパスワード要求\nROOTのパスフレーズを入力してください。これでシステムアップデートが許可されます。",
"zh": "⚠ 关键密码请求⚠\n输入ROOT密码。 这将授权系统更新。"
},
"rootkeys.get_update_password_backup": {
"en": "⚠ Critical password request ⚠\nEnter the 'root' passphrase. This authorizes a backup to be created.",
"en-tts": "Enter root password, in order to authorize a backup.",
"fr": "⚠ Demande de mot de passe essentiel ⚠\nSaisissez la phrase de passe 'racine'. Cela autorise la création d’une sauvegarde",
"ja": "重要なパスワード要求\nROOTのパスフレーズを入力してください。これにより、バックアップの作成が許可されます。",
"zh": "⚠ 关键密码请求⚠\n输入“ROOT”密码。 这将授权创建备份。"
},
"rootkeys.get_update_password_restore": {
"en": "⚠ Critical password request ⚠\nEnter the 'root' passphrase. This authorizes a restore to proceed.",
"en-tts": "Enter root password, in order to authorize a restore to proceed.",
"fr": "⚠ Demande de mot de passe essentiel ⚠\nSaisissez la phrase de passe 'racine'. Cela autorise une restauration de procéder.",
"ja": "重要なパスワード要求\nROOTのパスフレーズを入力してください。これにより、バックアップの作成が許可されます。",
"zh": "⚠ 关键密码请求⚠\n输入“ROOT”密码。 这将授权创建备份。"
},
"rootkeys.gwup.details": {
"en": "All details",
"en-tts": "All details",
"fr": "Tous les détails",
"ja": "すべての詳細",
"zh": "所有细节"
},
"rootkeys.gwup.finished": {
"en": "Gateware update finished.\n\nReboot by inserting a paperclip into the small hole on the lower right at your earliest convenience.",
"en-tts": "Gateware update finished. Reboot by inserting a paperclip into the small hole on the lower right at your earliest convenience.",
"fr": "La mise à jour du gateware est terminée.\n\nRedémarrer en insérant un trombone dans le petit trou en bas à droite dès que possible.",
"ja": "ゲートウェアアップデートが終了しました。ご都合の良い時に再起動してください。",
"zh": "更新完成重启应用"
},
"rootkeys.gwup.inspecting": {
"en": "Inspecting update, please wait...",
"en-tts": "Inspecting update, please wait.",
"fr": "Inspection mise à jour, veuillez attendre...",
"ja": "アップデートを確認しています、お待ちください...",
"zh": "正在检查比特流,请稍候..."
},
"rootkeys.gwup.no": {
"en": "No",
"en-tts": "No",
"fr": "Non",
"ja": "いいえ",
"zh": "取消"
},
"rootkeys.gwup.no_update_found": {
"en": "No valid update found, aborting!",
"en-tts": "No valid update found, aborting",
"fr": "Aucune mise à jour valide trouvée, abandon!",
"ja": "有効な更新が見つかりませんでした。中止します!",
"zh": "未找到有效更新,正在中止!"
},
"rootkeys.gwup.none": {
"en": "Skip",
"en-tts": "Skip",
"fr": "Passer",
"ja": "スキップ",
"zh": "跳过这步"
},
"rootkeys.gwup.proceed_confirm": {
"en": "Proceed with update?",
"en-tts": "Proceed with update?",
"fr": "Procéder à la mise à jour?",
"ja": "更新を続行しますか?",
"zh": "继续更新?"
},
"rootkeys.gwup.short": {
"en": "Short summary",
"en-tts": "Short summary",
"fr": "Bref résumé",
"ja": "簡単な要約",
"zh": "简短的摘要"
},
"rootkeys.gwup.sig_problem": {
"en": "Invalid signature on update, aborting.",
"en-tts": "Invalid signature on update, aborting.",
"fr": "Signature invalide à la mise à jour, abandon. ",
"ja": "更新時の署名が無効です。中止します。",
"zh": "更新时签名无效,正在中止。"
},
"rootkeys.gwup.viewinfo_dk": {
"en": "Devkey image found. Review details?",
"en-tts": "Devkey image found. Review details?",
"fr": "Image Devkey trouvée. Examiner les détails?",
"ja": "Devkeyの画像が見つかりました。 詳細を確認しますか?",
"zh": "找到 Devkey 映像。 查看详细信息?"
},
"rootkeys.gwup.viewinfo_ss": {
"en": "Self-signed image found. Review details?",
"en-tts": "Self-signed image found. Review details?",
"fr": "Image auto-signée trouvée. Examiner les détails?",
"ja": "自己署名画像が見つかりました。 詳細を確認しますか?",
"zh": "**missing**查看更新的详细信息?"
},
"rootkeys.gwup.viewinfo_tp": {
"en": "Third party image found. Review details?",
"en-tts": "Third party image found. Review details?",
"fr": "Image de tiers trouvée. Examiner les détails?",
"ja": "サードパーティの画像が見つかりました。 詳細を確認しますか?",
"zh": "**missing**查看更新的详细信息?"
},
"rootkeys.gwup.yes": {
"en": "Yes",
"en-tts": "Yes",
"fr": "Oui",
"ja": "はい",
"zh": "确定"
},
"rootkeys.gwup_starting": {
"en": "Updating gateware. This takes a few minutes.\nDo not reset or sleep!",
"en-tts": "Updating gateware. This may take a while, don't reset or sleep the device.",
"fr": "Mise à jour du gateware. Cela prend quelques minutes.\nNe pas réinitialiser ou dormir!",
"ja": "ゲートウェアをアップデート中です。これには数分かかります。\nリセットやスリープはしないでください。",
"zh": "现在正在初始化 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.backup_gateware": {
"en": "Backing up gateware. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Backing up gateware. This may take a while, don't reset or sleep the device.",
"fr": "Sauvegarde du gateware. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "ゲートウェアをバックアップ中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "备份比特流 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.commit_signatures": {
"en": "Committing signatures. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Committing signatures. This may take a while, don't reset or sleep the device.",
"fr": "Écriture des signatures. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "署名のコミット中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "保存签名 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.confirmation": {
"en": "This cannot be undone. Continue?",
"en-tts": "This cannot be undone. Continue?",
"fr": "Cela ne peut pas être défait. Continuer?",
"ja": "これは元に戻せません。続けますか?",
"zh": "这无法撤消,要继续吗?"
},
"rootkeys.init.fail_alignment": {
"en": "Internal alignment error, aborting!",
"en-tts": "Internal alignment error, aborting",
"fr": "Erreur d’alignement interne, abandon!",
"ja": "内部アライメントエラー、中止します!",
"zh": "*missing*正在初始化失败,中止!"
},
"rootkeys.init.fail_burn": {
"en": "FLASH write problem, aborting!",
"en-tts": "FLASH write problem, aborting",
"fr": "Problème d’écriture FLASH, abandon!",
"ja": "フラッシュ書き込みの問題、中止します!",
"zh": "*missing*正在初始化失败,中止!"
},
"rootkeys.init.fail_key": {
"en": "Incorrect password.",
"en-tts": "Incorrect password.",
"fr": "Mot de passe incorrect.",
"ja": "間違ったパスワード.",
"zh": "密码错误"
},
"rootkeys.init.fail_verify": {
"en": "Verification failed, aborting!",
"en-tts": "Verification failed, aborting",
"fr": "Échec de la vérification, abandon!",
"ja": "検証に失敗し、中止します!",
"zh": "*missing*正在初始化失败,中止!"
},
"rootkeys.init.finished": {
"en": "Rebooting now...\n\nIf the system shows a 'No valid keys' error or hangs, insert a paperclip into the hole in the lower right hand edge and plug in power to reload the FPGA bitstream.",
"en-tts": "Rebooting now...\n\nIf the system shows a 'No valid keys' error or hangs, insert a paperclip into the hole in the lower right hand edge and plug in power to reload the FPGA bitstream.",
"fr": "Redémarrer maintenant...\n\nSi le système affiche une erreur 'Pas de clé valide' ou se bloque, insérez un trombone dans le trou dans le coin inférieur droit et branchez-le pour recharger le bitstream FPGA.",
"ja": "再起動中...",
"zh": "准备重启... "
},
"rootkeys.init.patching_keys": {
"en": "Injecting device keys. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Injecting device keys. This may take a while, don't reset or sleep the device.",
"fr": "Injecter les clés de l’appareil. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "新しいキーを挿入中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "更换新钥匙 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.signing_gateware": {
"en": "Signing gateware. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Signing gateware. This may take a while, don't reset or sleep the device.",
"fr": "Écriture gateware. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "ゲートウェアへを署名中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "备份比特流 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.signing_kernel": {
"en": "Signing kernel. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Signing kernel. This may take a while, don't reset or sleep the device.",
"fr": "Écriture noyeau. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "カーネルへを署名中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "签名内核 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.signing_loader": {
"en": "Signing loader. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Signing loader. This may take a while, don't reset or sleep the device.",
"fr": "Écriture chargeur. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "ローダーは署名中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "签名引导程序 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.init.unplug_power": {
"en": "Please unplug the charging cable so I can reboot! ",
"en-tts": "Unplug the charging cable so I can reboot!",
"fr": "Veuillez débrancher le câble de charge pour que je puisse redémarrer!",
"ja": "再起動できるように、充電ケーブルを抜いてください。",
"zh": "拔下充电线以允许重启!"
},
"rootkeys.init.verifying_gateware": {
"en": "Verifying new gateware. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Verifying gateware. This may take a while, don't reset or sleep the device.",
"fr": "Verification du nouveau gateware. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "新しいゲートウェアの検証中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "验证比特流 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.policy_clear": {
"en": "Clear after use",
"en-tts": "Clear password after use",
"fr": "Effacer le mot de passe après utilisation",
"ja": "使用後クリア",
"zh": "使用后删除"
},
"rootkeys.policy_idle": {
"en": "Retain until timeout",
"en-tts": "Retain until timeout",
"fr": "Conserver jusqu’à l’expiration du délai",
"ja": "タイムアウトまで保持",
"zh": "保留到延时"
},
"rootkeys.policy_keep": {
"en": "Retain until reboot",
"en-tts": "Retain until reboot",
"fr": "Conserver jusqu’au redémarrage",
"ja": "リブートまで保持",
"zh": "保留到启动"
},
"rootkeys.policy_request": {
"en": "Please pick a password retention policy:",
"en-tts": "Please pick a password retention policy.",
"fr": "Veuillez choisir une politique de conservation des mots de passe :",
"ja": "パスワード保持ポリシーを指定ください。",
"zh": "请选择密码保留策略:"
},
"rootkeys.policy_suspend": {
"en": "Retain until sleep",
"en-tts": "Retain password until sleep",
"fr": "Conserver jusqu’au endormir",
"ja": "スリープまで保持",
"zh": "睡眠后删除"
},
"rootkeys.restore_abort": {
"en": "Aborting restore!",
"en-tts": "Aborting restore!",
"fr": "Abandon de restauration!",
"ja": "復元を中止します!",
"zh": "中止恢复!"
},
"rootkeys.restore_already_init": {
"en": "Device has already been initialized. A restore will overwrite existing keys, and potentially fail if your device is locked to a different backup key.\n\nProceed?",
"en-tts": "Device has already been initialized. A restore will overwrite existing keys, and potentially fail if your device is locked to a different backup key.\n\nProceed?",
"fr": "L'appareil a déjà été initialisé. Une restauration écrasera les clés existantes et pourrait échouer si votre périphérique est verrouillé sur une clé de sauvegarde différente.\n\nContinuer?",
"ja": "デバイスはすでに初期化されています。 復元するとすべてのデータが上書きされ、デバイスが別のバックアップキーにロックされていると失敗する可能性があります。\n \n続行しますか?",
"zh": "设备已经初始化。 还原将覆盖所有数据,如果您的设备被锁定到不同的备份密钥,则可能会失败。\n\n是否继续?"
},
"rootkeys.restore_badpass": {
"en": "BIP-39 entry was not valid. Aborting restore!",
"en-tts": "BIP-39 entry was not valid. Aborting restore!",
"fr": "L’entrée BIP-39 n’était pas valide. Abandon de la restauration!",
"ja": "BIP-39エントリが無効でした。 復元を中止します!",
"zh": "BIP-39 条目无效。 中止恢复!"
},
"rootkeys.restore_corrupt": {
"en": "Restore record is corrupted. Aborting restore!",
"en-tts": "Restore record is corrupted. Aborting restore!",
"fr": "Enregistrement de restauration corrompu. Abandon de la restauration!",
"ja": "復元レコードが破損しています。 復元を中止します!",
"zh": "还原记录已损坏。 中止恢复!"
},
"rootkeys.restore_needs_keyburn": {
"en": "Note: Restoring to a device that booted from a 'Zero Key'.\n\nAfter the restore, you will need to set a brand new backup key. Until then, your backup key will be the insecure Zero Key!",
"en-tts": "Note: Restoring to a device that booted from a zero key.\n\nAfter the restore, you will need to set a brand new backup key. Until then, your backup key will be the 0 key!",
"fr": "Remarque: Restauration sur un appareil qui a démarré à partir d’une 'Zero Key'.\n\nAprès la restauration, vous devrez définir une nouvelle clé de sauvegarde. D’ici là, votre clé de sauvegarde sera la Zero Key non sécurisée!",
"ja": "注:ゼロキーから起動したデバイスに復元します。\n\n復元後、新しいバックアップキーを設定する必要があります。 それまでは、バックアップキーは0キーになります。",
"zh": "注意:还原到从零密钥启动的设备。\n\n还原后,您需要设置一个全新的备份密钥。 在那之前,您的备份密钥将是 0 密钥!"
},
"rootkeys.restore_zero_key": {
"en": "Note: your backup was encrypted with the '0' key. Skipping password entry.\nThis is normal for developers.\n\nUsers should burn BBRAM or eFuse key for secure backups!",
"en-tts": "Note: your backup was encrypted with the '0' key. Skipping password entry.\n\nBurn BBRAM or eFuse key for secure backups!",
"fr": "Remarque: votre sauvegarde a été chiffrée avec la clé '0'. Sauter l’entrée du mot de passe.\nCeci est normal pour les développeurs.\n\nLes utilisateurs doivent graver une clé BBRAM ou eFuse pour les sauvegardes sécurisées!",
"ja": "注:バックアップは「0」キーで暗号化されています。 パスワード入力をスキップします。\n\n安全なバックアップのためにBBRAMまたはeFuseキーを焼きます!",
"zh": "注意:您的备份是使用“0”密钥加密的。 跳过密码输入。\n\n刻录 BBRAM 或 eFuse 密钥以进行安全备份!"
},
"rootkeys.setup_wait": {
"en": "Initializing keys. This takes a few minutes. Do not reset or sleep!",
"en-tts": "Initializing keys. This may take a while, don't reset or sleep the device.",
"fr": "Initialisation des clés. Cela prend quelques minutes. Ne pas réinitialiser ou dormir!",
"ja": "キーを初期化中です。これには数分かかります。リセットやスリープはしないでください。",
"zh": "现在正在初始化 可能还要等一下 不要重置或睡眠! "
},
"rootkeys.signxous.finished": {
"en": "Xous signing finished.\nReboot at your earliest convenience.",
"en-tts": "Xous signing finished. Reboot at your earliest convenience.",
"fr": "La signature de Xous est terminée.\nRedémarrer le plus tôt possible.",
"ja": "Xousのサインは終了しました。ご都合の良い時に再起動してください。",
"zh": "更新完成重启应用"
},
"rootkeys.try_again": {
"en": "Try again?",
"en-tts": "Try again?",
"fr": "Réessayez?",
"ja": "再試行?",
"zh": "再试一次?"
},
"rootkeys.updatefirstpass": {
"en": "⚠ Critical Password ⚠\nCreate a strong root password for authorizing system updates.",
"en-tts": "Enter a root password. This should be a strong password.",
"fr": "⚠ Mot de passe essentiel ⚠\nCréez un mot de passe racine solide pour autoriser les mises à jour du système.",
"ja": "重要なパスワード\nシステムアップデートを認証するための強力なパスフレーズを作成します。",
"zh": "输入密码 软件更新 安全含义:至关重要 "
},
"rootkeys.updatepass": {
"en": "⚠ Critical Password ⚠\nPlease confirm the root password.",
"en-tts": "Please confirm the root password.",
"fr": "⚠ Mot de passe essentiel ⚠\nVeuillez confirmer le mot de passe racine.",
"ja": "ルートパスワードを確認してください。",
"zh": "请确认root密码。"
},
"rootkeys.updatepass_fail": {
"en": "Passwords did not match. Try again?",
"en-tts": "Passwords did not match. Try again?",
"fr": "Les mots de passe ne correspondent pas. Réessayez?",
"ja": "パスワードが間違っています。 再試行?",
"zh": "密码不匹配。 再试一次?"
},
"rootkeys.wrong_state": {
"en": "System in an unexpected state. Aborting.",
"en-tts": "System in an unexpected state. Aborting.",
"fr": "Système dans un état inattendu. Abandon.",
"ja": "予期しない状態のシステム。 中止します。",
"zh": "系统处于意外状态。 中止。"
}
}