The original implementation didn't keep around some key data,
so we had to read the old version of the record and update parameters
assuming that the USB descriptors didn't change too much.
Unfortunately with the mass storage option, the description can
change quite a bit, so we have to reconsitute it from scratch.
Basically, we re-do the `alloc()` call in the reset routine,
playing it reverse so that we setup all the higher-number
endpoints before doing ep0 last.
This hopefully fixes a stability issue for usb hid mode when
mass storage is enabled as a build option.
- use new SpinalUsbDevice::new() interface instead of cloning
- put the blank "key-up" event on keyboard events after the
core is switched to, instead of at boot.
- add some more appropriate debug statements to help track
view switching in debug logs
Instead of making it once and then cloning it (which is a bit
unclear what's going on), make it so that the shared memory
ranges are allocated in the caller's scope, and then create
the structure "clean".
Also add a static AtomicBool to track interrupt init state,
since that can be only called once.
bulk endpoints have a different behavior now than interrupt
endpoints; bulk endpoints have chained descriptors so that the
hardware automatically responds to multiple USB packets quickly.
interrupt endpoints also have subtly different way of handling
data readiness, which is incompatible with the block device layer
as implemented.
since we don't have a clear use case for this yet and it's just
for testing on bleeding-edge, make a very small disk just so it's
easier for people to do testing, but not so big that it's a burden
on the system.
later on we can make this dynamically sizeable/allocateable only
e.g., only when the disk is required
before we were looking at the amount of data transferred and
seeing if it matches the expected amount
I just realized that we can just look at the descriptor pointer in
the status region; if it is non-zero, then the descriptor set
is "live" and needs to be filled.
if it's zero, then a packet came in.
use this to fix the wait conditions for accepting new commands.
IN descriptors now chain up to 512 bytes long
OUT descriptors still need to be worked up
However, there is an issue where the system is injecting the
ZLP/CSW immediately after the bulk response is queued up, and this
is getting sent before the bulk data is issued. Need to figure out
this race condition.
Users are confused when they are prompted to enter a PIN code for
the first time with no preparation. Update the format request message
to prime users for the task.
commit a09100ab4a
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:55:55 2022 +0800
bump lockfile
commit 53172e1471
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:46:40 2022 +0800
bump verification pins
commit 36398810dd
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:24:36 2022 +0800
bump version numbers to absorb new syscalls
commit 062fa6178a
Merge: ac4a854e3bcc955a
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:23:31 2022 +0800
Merge branch 'reply-and-receive-next-syscall' into main
commit ac4a854e49
Merge: d1375343e4c298db
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:22:25 2022 +0800
Merge branch 'main' of github.com:betrusted-io/xous-core into main
commit 3bcc955aba
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:21:43 2022 +0800
add test code that also benchmarks the new routines.
commit e4c298db40
Merge: f71278b4e2bf7109
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 30 15:16:13 2022 +0800
Merge pull request #289 from betrusted-io/reply-and-receive-next-syscall
Reply and receive next syscall
commit e2bf710939
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:06:51 2022 +0800
services: xous-ticktimer: use reply_and_receive_next()
Convert the ticktimer server to use the new
reply_and_receive_next_legacy() call. This is an example of how to use
this API for future projects.
Signed-off-by: Sean Cross <sean@xobs.io>
commit 0e75b8e479
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:05:26 2022 +0800
test-spawn: rename `Message` to `MessageEnvelope`
Signed-off-by: Sean Cross <sean@xobs.io>
commit 3218bde2b4
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:04:01 2022 +0800
kernel: implement reply_and_receive_next
Implement `ReplyAndReceiveNext` as a syscall. This will reply to a
message, pull the next message out of the queue, and then re-queue the
server to run. This should make servers much more responsive.
This patch has been tested on both hosted and native modes.
Signed-off-by: Sean Cross <sean@xobs.io>
commit d1375343c1
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 23:34:48 2022 +0800
update release notes
commit f71278b422
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 22:04:55 2022 +0800
fix issue #109 - refactor key fill/scan to not crash after pruning
After a prune, key fill/scan can crash because there is an assumption
that data is always resident in the cache for a small key.
This code handles the case where the small key data was evicted during
a prune, and reads the data back in just for that key on demand.
Furthermore, during a `sync` call, it will pull in the key data
that corresponds to the page containing just the small key, allowing
that page to be re-composed and replaced in memory. caching is used
on the decryption of the small key page so the expensive bit
of the call should only happen once per small key bank.
tested with pddb-ci and manually in hosted mode.
A portion of code was re-written to make it clear that only the
length of allocated data is copied to/from disk and memory, instead
of the reserved space as the previous code would indicate. The reserved
space is guaranteed to be zero because the RAM-based page for composing
the small key block is zero-ized prior to operations; left comments
reminding me of this in the future so I don't accidentally optimize
something out and cause data leakage between small keys because I'm
allowing the reserved areas to contain stale data.
commit e25da3a720
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 22:04:15 2022 +0800
add implemenation of the `prune` debug call
this allows us to trigger the cache prune manually, instead of
in response to memory backpressure only
commit 549e67fead
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 22:03:19 2022 +0800
add a `prune` debug call to force a hard-prune of the pddb cache
commit e045574d39
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:06:51 2022 +0800
services: xous-ticktimer: use reply_and_receive_next()
Convert the ticktimer server to use the new
reply_and_receive_next_legacy() call. This is an example of how to use
this API for future projects.
Signed-off-by: Sean Cross <sean@xobs.io>
commit 23c17d7632
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:05:26 2022 +0800
test-spawn: rename `Message` to `MessageEnvelope`
Signed-off-by: Sean Cross <sean@xobs.io>
commit aae5f3737c
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:04:01 2022 +0800
kernel: implement reply_and_receive_next
Implement `ReplyAndReceiveNext` as a syscall. This will reply to a
message, pull the next message out of the queue, and then re-queue the
server to run. This should make servers much more responsive.
This patch has been tested on both hosted and native modes.
Signed-off-by: Sean Cross <sean@xobs.io>
commit ab0c7d3b32
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:03:39 2022 +0800
kernel: server: check buf is some when returning mem
Signed-off-by: Sean Cross <sean@xobs.io>
commit 46f340324d
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:02:57 2022 +0800
kernel: rename `Message` -> `MessageEnvelope`
This syncs with the latest changes to `xous-rs`.
Signed-off-by: Sean Cross <sean@xobs.io>
commit 911ddb60fc
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:01:27 2022 +0800
kernel: debug: fix klog on baremetal
klog() refers to an outdated `.uart` struct, which has since been
renamed to `.serial`.
Signed-off-by: Sean Cross <sean@xobs.io>
commit d88254b1b1
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:00:35 2022 +0800
xous: add reply_and_receive_next_legacy call
This call is used to return values while simultaneously listening for
new messages.
The -legacy suffix is used to disambiguate scalar values, so we know
whether to send Scalar1, Scalar2, or Scalar5 messages.
Signed-off-by: Sean Cross <sean@xobs.io>
commit 64c88f9942
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 21:00:05 2022 +0800
xous: add Message type
This type actually contains the message contents, and will be used to
return data to the caller.
Signed-off-by: Sean Cross <sean@xobs.io>
commit d463f9563f
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 29 20:58:51 2022 +0800
xous: rename Message to MessageEnvelope
This reflects the fact that up until now, the `Message` struct has
merely been the envelope that surrounds the message. It does not contain
any actual Message contents.
Signed-off-by: Sean Cross <sean@xobs.io>
commit 49ce85f9a8
Author: Sean Cross <sean@xobs.io>
Date: Wed Jul 6 15:57:10 2022 +0800
ticktimer-server: prepare for using ReplyAndReceiveNext
Misc cleanup prior to switching which call we use.
Signed-off-by: Sean Cross <sean@xobs.io>
commit be56af6303
Author: Sean Cross <sean@xobs.io>
Date: Wed Jul 6 15:35:22 2022 +0800
xous: add wrapper for reply_and_receive_next
This wrapper enables userspace programs to use the new
ReplyAndReceiveNext syscall easily.
Signed-off-by: Sean Cross <sean@xobs.io>
commit 36e6e6c30b
Author: Sean Cross <sean@xobs.io>
Date: Wed Jul 6 15:18:32 2022 +0800
xous: syscall: add ReplyAndReceiveNext call
Signed-off-by: Sean Cross <sean@xobs.io>
commit 1e56598b10
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 00:53:32 2022 +0800
chore: fix some typos
commit 1291b0f00b
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 00:38:27 2022 +0800
add issue # to release note
commit 7206f24271
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 00:37:47 2022 +0800
update release notes
commit 2f30e1b50a
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 00:11:03 2022 +0800
implement #269
commit 5370c333da
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 29 00:10:42 2022 +0800
add callback for monitoring basis lock/unlock events
commit 8d42feb051
Author: bunnie <bunnie@kosagi.com>
Date: Wed Dec 28 19:48:40 2022 +0800
increase heap for mtxcli; add memory usage reporting
commit ac1df054ab
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 26 13:52:44 2022 +0800
absorb 22-bit satp fix
commit 89500015a7
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 15 17:52:55 2022 +0800
try to fix regression from #284
still hitting cache coherence edge cases. expanding the flush
set read by one more way.
commit 41ea0a37c5
Merge: e422740db288d93a
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 15 14:36:40 2022 +0800
Merge branch 'main' of github.com:betrusted-io/xous-core into main
commit b288d93abd
Merge: 8e1d0502d4527b82
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 15 14:00:10 2022 +0800
Merge pull request #284 from betrusted-io/use-thin-lto
cargo: use thin-lto
commit d4527b8227
Author: Sean Cross <sean@xobs.io>
Date: Thu Dec 15 12:26:00 2022 +0800
cargo: use thin-lto
Use thin LTO for linking. This shouldn't have too big of an affect on
the resulting binary size, and it fixes the build for 1.66.0:
= note: rust-lld: error: undefined symbol:
core::panicking::panic_str_nounwind::h9b449c0fe03c8dac
>>> referenced by compiler_builtins.22a3dcb1-cgu.13
>>> compiler_builtins-b913bacb8fda1c55.compiler_builtins.22a3dcb1-cgu.13.rcgu.o:(compiler_builtins::math::libm::rem_pio2_large::rem_pio2_large::h3db6431f23a281c1)
in archive root\lib\rustlib\riscv32imac-unknown-xous-elf\lib\libcompiler_builtins-b913bacb8fda1c55.rlib
>>> referenced by compiler_builtins.22a3dcb1-cgu.13
>>> compiler_builtins-b913bacb8fda1c55.compiler_builtins.22a3dcb1-cgu.13.rcgu.o:(compiler_builtins::math::libm::rem_pio2_large::rem_pio2_large::h3db6431f23a281c1)
in archive root\lib\rustlib\riscv32imac-unknown-xous-elf\lib\libcompiler_builtins-b913bacb8fda1c55.rlib
Signed-off-by: Sean Cross <sean@xobs.io>
commit e422740d37
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 23:03:50 2022 +0800
chore: last one. really.
commit ad79ebf8ba
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 23:02:09 2022 +0800
chore: more typos. no really, i can stop at any time.
commit b1b6d46d27
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 22:56:37 2022 +0800
chore: more typos
probably should not have tried to spell check this, now i'm wasting
my time.
commit 283ea1de0d
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 22:49:25 2022 +0800
chore: fix more typos, add french dictionary to vscode workspace settings
commit 1d94968b2f
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 22:36:47 2022 +0800
chore: fix typos
commit e930d88563
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 01:42:00 2022 +0800
placeholder for 0.9.12 release notes
commit 8e1d05020d
Author: bunnie <bunnie@kosagi.com>
Date: Tue Dec 13 00:32:11 2022 +0800
add v0.9.11 to the restore.py URL list
commit bd230f5bb0
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:51:27 2022 +0800
fix text to speech mode preferences setting
never allow the audio system to be turned off for blind people,
and disallow 0-volume setting as well.
commit 38bc254bb9
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:28:33 2022 +0800
fix missing ja/zh translation
commit 60d4482ce2
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:16:04 2022 +0800
bump lockfile
commit 56f0843229
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:08:28 2022 +0800
bump verifier numbers
commit 5370ce396d
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:07:20 2022 +0800
bump all revs due to SoC artifact update
commit cac0e57cda
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:06:31 2022 +0800
change default target
commit 04b441a234
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:06:19 2022 +0800
add 0.9.11 build artifact
commit 08cf863ff5
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 16:05:15 2022 +0800
update SoC artifacts for 0.9.11 build
commit c32b5d5bac
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 15:31:15 2022 +0800
bump release notes
commit 80ce119c95
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 15:31:06 2022 +0800
fix RSSI calculations
commit edf24d9fc2
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 14:11:19 2022 +0800
clean up on the wifi signal bars
commit eb17edc4ec
Merge: 9a580070435a6ea2
Author: bunnie <bunnie@kosagi.com>
Date: Mon Dec 12 11:47:18 2022 +0800
Merge pull request #283 from gsora/feat/wifi-signal-bars
feat: wifi signal bar
commit 9a580070a3
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 11 17:50:51 2022 +0800
revert threaded init question now that deface issue is fixed
commit f9cdf31857
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 11 17:07:29 2022 +0800
bump release notes
commit 196ceb0d29
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 11 16:42:03 2022 +0800
fix: avoid thrashing when recomputing previously defaced canvases
There was a dubious line that I never felt good about and today
I found out why. By flipping every canvas to drawable before doing
the intersection computation we also throw away the defacement state,
so previously defaced canvases would lose their status bit, causing
thrashing of the canvases anytime there is a re-computation of
the canvas ordering.
This fix caches if a canvas was already defaced, and if it turns out
that an on-screen canvas should not be drawable but was already
defaced, the setting is re-applied, preventing thrashing.
commit dca043d387
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 11 16:41:53 2022 +0800
improve context swap debug messages
commit 8d8dd2bd2f
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 11 16:41:25 2022 +0800
fix typo in unwrap message
commit f31afa5125
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 11 16:41:06 2022 +0800
remove unused opcode in shellchat; improve debug output
commit 6138b65d76
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 23:44:18 2022 +0800
update comments to reflect changes in CI infra
commit 399124f942
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 22:05:47 2022 +0800
fix hosted mode
commit 939e13950d
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 18:59:55 2022 +0800
comment out debug in rootkeys implementation section
commit 2097afc166
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 18:58:06 2022 +0800
add efuse burning flow to rootkeys
currently only available for builds that have the `efuse` feature
enabled
commit 19e16aea29
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 18:56:59 2022 +0800
fix jtag fuse burning & add diagnostic messages
- msb/lsb swap on efuse bank fixed
- hazardous-debug feauter gates added
- dry-run for "testing only" added
commit 4ec866e1d7
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 18:56:12 2022 +0800
add diagnostic seal command
commit f5c687a524
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 17:45:30 2022 +0800
clarify user prompt
commit 2b4e47384e
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 17:44:54 2022 +0800
add fused device support and warnings to precursorupdater
commit e42c4c7b33
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 16:39:14 2022 +0800
add warnings & support for fused devices
burning a generic image to a fused device will surely lead to
a brick, so, try to keep a user from shooting themselves in the foot.
commit c2f7a63f97
Author: bunnie <bunnie@kosagi.com>
Date: Sat Dec 10 16:39:01 2022 +0800
remove some whitespace to allow for easier debugging
commit 1f89843122
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 9 12:38:53 2022 +0800
defer init root keys question until status thread starts
also defer the preference thread from loading until after the
PDDB mount thread is started -- doesn't make sense to start it
any earlier than that, since it depends on the PDDB being mounted.
commit 02f9701546
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 8 17:42:12 2022 +0800
make an explicit dvt feature to simplify flags
commit 4dd983bfc4
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 8 17:19:05 2022 +0800
adjust security parameters for dvt build
commit fc08c3e29d
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 8 17:14:47 2022 +0800
add hazardous-debug to modals bip-39
for convenient key printout during debug. flag is normally off.
commit dd82b7f32a
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 8 17:14:21 2022 +0800
add no-codec mode to status
this is for DVT builds where the codec isn't supported, needed
for efuse testing
commit a5d341c7a6
Author: bunnie <bunnie@kosagi.com>
Date: Thu Dec 8 14:09:36 2022 +0800
add a bitstream encryption/recovery tool for fused devices
This is useful for recovering bricked devices where the backup
key is available. This tool can be used to generate an FPGA
image for a device that has been permanently fused to a non-0
backup key.
commit 4f270f54be
Author: bunnie <bunnie@kosagi.com>
Date: Wed Dec 7 22:24:56 2022 +0800
revert debugging on status opcodes
commit 435a6ea2bd
Author: Gianguido Sorà <me@gsora.xyz>
Date: Wed Dec 7 14:28:07 2022 +0100
feat: wifi signal bar
This commit draws a Wi-Fi signal bar with 5 bars (lowest to highest signal), to the right of SSID name.
Signal power is calculated from a lowest of -90dBm to a maximum of -30dBm, by increments of 13dBm.
commit f84a9d10c7
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 4 18:13:37 2022 +0800
add placeholder for the efuse flow in the rootkey service
commit 8208a86c08
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 4 18:12:30 2022 +0800
add the UX front-end for backup key burning
- instructions for BBRAM flow (refers to wiki)
- consent for efuse flow
- fix a blocking issue on backup prep (minor problem, just gives
users more time to contemplate without a panic)
commit 3838f3bc15
Author: bunnie <bunnie@kosagi.com>
Date: Sun Dec 4 18:12:05 2022 +0800
add a pause for context swaps on menu release
commit 53c9af1033
Author: bunnie <bunnie@kosagi.com>
Date: Fri Dec 2 23:00:38 2022 +0800
bump readme's
