- track field heights using the drawing height directly
- use an &mut reference in the text processing section so changes stick
- other minor cosmetic improvements
The next release will feature an access control on USB so that
root keys and the encrypted gateware cannot be read back and
transitively the writes would be guttered (but this is not a problem
because the write target address is not set by the memory location
of the write, it's actually set by the location specified in
the program command to the FLASH).
This means that the updating program has to be modified accordingly;
now, for writes, a single location is targeted (and as alluded above,
this is funneled to a write FIFO buffer, and then the actual address is
set with the page program command); and for readback, attempts to read
back the SoC area are flagged and noted as impossible due to security
precautions.
The next release will feature an access control on USB so that
root keys and the encrypted gateware cannot be read back and
transitively the writes would be guttered (but this is not a problem
because the write target address is not set by the memory location
of the write, it's actually set by the location specified in
the program command to the FLASH).
This means that the updating program has to be modified accordingly;
now, for writes, a single location is targeted (and as alluded above,
this is funneled to a write FIFO buffer, and then the actual address is
set with the page program command); and for readback, attempts to read
back the SoC area are flagged and noted as impossible due to security
precautions.
This audio codec lives on I2C and doesn't really do much for us.
However, by adding this device we can now pass `test oqc`.
The next step will be to implement `BetrustedI2S` which is where the
actual audio emulation occurs.
Signed-off-by: Sean Cross <sean@xobs.io>
Because of the previous commit, endianness was incorrect and we weren't
reading the full range of values.
Correct the endianness and support continuous reads. Also expose various
settings so they may be adjusted.
Signed-off-by: Sean Cross <sean@xobs.io>
Previously, the code would only allow for reading one register at a
time. This caused that one register to be duplicated repeatedly.
As a result, readings such as Voltage were incorrect.
Signed-off-by: Sean Cross <sean@xobs.io>