Merge pull request #896 from betrusted-io/multiple-mbr

#882 Reconstructed
This commit is contained in:
bunnie 2026-06-08 23:43:52 +08:00 committed by GitHub
commit b8f3aad1d9
No known key found for this signature in database
GPG key ID: B5690EEEBB952194

View file

@ -29,6 +29,41 @@ pub unsafe fn init_usb() {
disk[offset..offset + 32].copy_from_slice(&block);
}
// Windows uses the MBR disk signature (0x1b8) to deduplicate volumes; two boards
// with the same signature cannot both receive a drive letter simultaneously. Derive
// all three fields (MBR disk sig, primary and backup FAT VSN) from the per-device
// UUID so each board is unique.
{
let owc = bao1x_hal::acram::OneWayCounter::new();
let slot_mgr = bao1x_hal::acram::SlotManager::new();
let sn = bao1x_hal::usb::derive_usb_serial_number(&owc, &slot_mgr);
// XOR-fold all 6 serial-number bytes into 4 VSN bytes so every bit of the
// UUID-derived string contributes to the VSN.
let mut vsn = [0u8; 4];
for (i, &b) in sn.as_bytes().iter().enumerate() {
vsn[i % 4] ^= b;
}
// 0x1b8 is the MBR disk signature per https://wiki.osdev.org/MBR_(x86)
const MBR_DISK_SIG: usize = 0x1b8;
// The value of this constant depends upon the value written into the
// partition table. The partition start is defined here:
// 0x1C6: 80 00 00 00 <- LBA of partition start = 0x00000080 = 128
// 128 (sectors) * 512 (bytes/sector) = 0x1_0000.
// Starting at 0x43 there is the "BS_VolID" or "VSN" record, 4 bytes long.
// The backup VBR is, by spec, located at 6 sectors from the partition
// start. 6 * 512 = 3072 = 0xc00, hence 0x1_c000 as its base offset.
//
// The pokes below stick the same derived 4-byte value into these three
// fields, which helps Windows differentiate between multiple Baochip
// devices mounted, with a 2^16 chance of collision per the birthday
// paradox, given a 32-bit randomly generated ID.
const PRIMARY_VBR_VSN: usize = 0x1_0043;
const BACKUP_VBR_VSN: usize = 0x1_0c43;
disk[MBR_DISK_SIG..MBR_DISK_SIG + 4].copy_from_slice(&vsn);
disk[PRIMARY_VBR_VSN..PRIMARY_VBR_VSN + 4].copy_from_slice(&vsn);
disk[BACKUP_VBR_VSN..BACKUP_VBR_VSN + 4].copy_from_slice(&vsn);
}
// install the interrupt handler
// setup the stack & controller
// irq_setup(); // this is already assumed to have been called by early_init()!