add the FIFO basic unit test + todo list of tests

This commit is contained in:
bunnie 2024-03-03 02:39:12 +08:00
parent 0a31875a19
commit 8a7b5e5627
2 changed files with 99 additions and 26 deletions

View file

@ -80,26 +80,29 @@ pub fn bio_tests() {
units::hello_world(); units::hello_world();
units::hello_multiverse(); units::hello_multiverse();
units::fifo_basic();
} }
// Test plan: // Test plan:
// Unit tests: // Unit tests:
// - Basic FIFO stall test. Two cores writing to each other to unlock. // -[x] Basic FIFO stall test. Two cores writing to each other to unlock.
// - Host FIFO stall on empty test. Core stalls until host provides data. // -[ ] Host FIFO stall on empty test. Core stalls until host provides data.
// - Host FIFO stall on full test. Core stall until host reads data. // -[ ] Host FIFO stall on full test. Core stall until host reads data.
// - GPIO input path test // -[ ] GPIO input path test
// - GPIO direction control test // -[ ] GPIO direction control test
// - FIFO level trigger test - eq, gt, lt on various channels, at various fullness levels // -[ ] FIFO level trigger test - eq, gt, lt on various channels, at various fullness levels
// - Stall on event - register bit test, between cores // -[ ] Stall on event - register bit test, between cores
// - Stall on event - register bit test, to host // -[ ] Stall on event - register bit test, to host
// - Stall on event - FIFO level test // -[ ] Stall on event - FIFO level test
// - Host IRQ generation test - some combination with event tests above to confirm IRQ generation // -[ ] Host IRQ generation test - some combination with event tests above to confirm IRQ generation
// - Core ID read test // -[ ] Extclk as x20 stall source
// - Core aclk counter test // -[ ] Check Extclk:gpio pin mapping (make sure bit ordering is not swapped)
// -[ ] Core ID read test
// -[ ] Core aclk counter test
// Application tests: // Application tests:
// - SPI loopback test // -[ ] SPI loopback test - implement using extclk as spi clk for input
// - I2C loopback test // -[ ] I2C loopback test
// - IR controller test // -[ ] IR controller test
// - Arithmetic test, utilizing load/store on core 0 // -[ ] Arithmetic test, utilizing load/store on core 0
// - Arithmetic test, without store, cores 1-3 // -[ ] Arithmetic test, without store, cores 1-3
// - DMA transfer test -- might have to wait until full-chip integration to get MDMA core? // -[ ] DMA transfer test -- might have to wait until full-chip integration to get MDMA core?

View file

@ -70,16 +70,20 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END,
// using 'c.j' syntax for the jump causes the assembler to emit an error, // using 'c.j' syntax for the jump causes the assembler to emit an error,
// but the code still compiles, so...avoiding that for now. might be a bug, // but the code still compiles, so...avoiding that for now. might be a bug,
// but I am very not interested in fixing that today. // but I am very not interested in fixing that today.
"j 0f", //
// Also note that labels can only be numbers from 0-99, and, due to an llvm
// bug, labels made exclusively of 0 or 1 should be avoided because they get
// interpreted as binary numbers. dat's some jank in the tank!!
"j 90f",
"nop", "nop",
"j 1f", "j 91f",
"nop", "nop",
"j 2f", "j 92f",
"nop", "nop",
"j 3f", "j 93f",
"nop", "nop",
// mach 0 code // mach 0 code
"0:", "90:",
// x26 sets the GPIO mask // x26 sets the GPIO mask
"li x2, 0xFF", // load constants into r0-15 bank first "li x2, 0xFF", // load constants into r0-15 bank first
"mv x26, x2", // it's not legal to do anything other than mv to x26 "mv x26, x2", // it's not legal to do anything other than mv to x26
@ -92,7 +96,7 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END,
"mv x20, zero", "mv x20, zero",
"j 4b", "j 4b",
// mach 1 code // mach 1 code
"1:", "91:",
"li x2, 0xFF00", "li x2, 0xFF00",
"mv x26, x2", "mv x26, x2",
"add x1, zero, 0x20", "add x1, zero, 0x20",
@ -102,7 +106,7 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END,
"mv x20, zero", "mv x20, zero",
"j 5b", "j 5b",
// mach 2 code // mach 2 code
"2:", "92:",
"li x2, 0xFF0000", "li x2, 0xFF0000",
"mv x26, x2", "mv x26, x2",
"add x1, zero, 0x30", "add x1, zero, 0x30",
@ -112,7 +116,7 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END,
"mv x20, zero", "mv x20, zero",
"j 6b", "j 6b",
// mach 3 code // mach 3 code
"3:", "93:",
"li x2, 0xFF000000", "li x2, 0xFF000000",
"mv x26, x2", "mv x26, x2",
"add x1, zero, 0x40", "add x1, zero, 0x40",
@ -122,3 +126,69 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END,
"mv x20, zero", "mv x20, zero",
"j 7b" "j 7b"
); );
pub fn fifo_basic() {
report_api(0x1310_2000);
report_api(0xf1f0_0000);
let mut bio_ss = BioSharedState::new();
// stop all the machines, so that code can be loaded
bio_ss.bio.wo(utra::bio::SFR_CTRL, 0x0);
let code = fifo_basic_code();
bio_ss.load_code(code, 0);
// configure & run the 0th machine
// / 16. clock
bio_ss.bio.wo(utra::bio::SFR_QDIV0, 0x23_BE00);
bio_ss.bio.wo(utra::bio::SFR_QDIV1, 0x33_1200);
// snap GPIO outputs to the quantum
bio_ss.bio.wo(utra::bio::SFR_CONFIG,
bio_ss.bio.ms(utra::bio::SFR_CONFIG_SNAP_TO_QUANTUM, 1)
| bio_ss.bio.ms(utra::bio::SFR_CONFIG_SNAP_TO_QUANTUM, 2) // arbitrary choice, they should all be the same
);
// start all the machines, all at once
bio_ss.bio.wo(utra::bio::SFR_CTRL, 0xfff);
report_api(0x1310_20FF);
}
bio_code!(fifo_basic_code, FIFO_BASIC_START, FIFO_BASIC_END,
"j 90f",
"nop",
"j 91f",
"nop",
"j 92f",
"nop",
"j 93f",
"nop",
// mach 0 code
"90:",
"li x2, 0xFFFF",
"mv x26, x2",
"li x1, 0x10000000",
"li x2, 0x10000",
"11:",
"mv x16, x1",
"mv x21, x17",
"add x1, x1, x2",
"mv x20, zero",
"j 11b",
// mach 1 code
"91:",
"li x2, 0xFFFF0000",
"mv x26, x2",
"li x1, 0x8000",
"21:",
"mv x17, x1",
"mv x21, x16",
"addi x1, x1, 1",
"mv x20, zero",
"j 21b",
// mach 2 code
"92:",
"j 92b",
// mach 3 code
"93:",
"j 93b",
"nop"
);