From 8a7b5e5627bb15a929566ea02bb823e86017809c Mon Sep 17 00:00:00 2001 From: bunnie Date: Sun, 3 Mar 2024 02:39:12 +0800 Subject: [PATCH] add the FIFO basic unit test + todo list of tests --- libs/xous-bio/src/bio_tests/mod.rs | 39 +++++++------ libs/xous-bio/src/bio_tests/units.rs | 86 +++++++++++++++++++++++++--- 2 files changed, 99 insertions(+), 26 deletions(-) diff --git a/libs/xous-bio/src/bio_tests/mod.rs b/libs/xous-bio/src/bio_tests/mod.rs index 81ac763ab..7210729d6 100644 --- a/libs/xous-bio/src/bio_tests/mod.rs +++ b/libs/xous-bio/src/bio_tests/mod.rs @@ -80,26 +80,29 @@ pub fn bio_tests() { units::hello_world(); units::hello_multiverse(); + units::fifo_basic(); } // Test plan: // Unit tests: -// - Basic FIFO stall test. Two cores writing to each other to unlock. -// - Host FIFO stall on empty test. Core stalls until host provides data. -// - Host FIFO stall on full test. Core stall until host reads data. -// - GPIO input path test -// - GPIO direction control test -// - FIFO level trigger test - eq, gt, lt on various channels, at various fullness levels -// - Stall on event - register bit test, between cores -// - Stall on event - register bit test, to host -// - Stall on event - FIFO level test -// - Host IRQ generation test - some combination with event tests above to confirm IRQ generation -// - Core ID read test -// - Core aclk counter test +// -[x] Basic FIFO stall test. Two cores writing to each other to unlock. +// -[ ] Host FIFO stall on empty test. Core stalls until host provides data. +// -[ ] Host FIFO stall on full test. Core stall until host reads data. +// -[ ] GPIO input path test +// -[ ] GPIO direction control test +// -[ ] FIFO level trigger test - eq, gt, lt on various channels, at various fullness levels +// -[ ] Stall on event - register bit test, between cores +// -[ ] Stall on event - register bit test, to host +// -[ ] Stall on event - FIFO level test +// -[ ] Host IRQ generation test - some combination with event tests above to confirm IRQ generation +// -[ ] Extclk as x20 stall source +// -[ ] Check Extclk:gpio pin mapping (make sure bit ordering is not swapped) +// -[ ] Core ID read test +// -[ ] Core aclk counter test // Application tests: -// - SPI loopback test -// - I2C loopback test -// - IR controller test -// - Arithmetic test, utilizing load/store on core 0 -// - Arithmetic test, without store, cores 1-3 -// - DMA transfer test -- might have to wait until full-chip integration to get MDMA core? +// -[ ] SPI loopback test - implement using extclk as spi clk for input +// -[ ] I2C loopback test +// -[ ] IR controller test +// -[ ] Arithmetic test, utilizing load/store on core 0 +// -[ ] Arithmetic test, without store, cores 1-3 +// -[ ] DMA transfer test -- might have to wait until full-chip integration to get MDMA core? diff --git a/libs/xous-bio/src/bio_tests/units.rs b/libs/xous-bio/src/bio_tests/units.rs index 3755bfc6e..c41cde76d 100644 --- a/libs/xous-bio/src/bio_tests/units.rs +++ b/libs/xous-bio/src/bio_tests/units.rs @@ -70,16 +70,20 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END, // using 'c.j' syntax for the jump causes the assembler to emit an error, // but the code still compiles, so...avoiding that for now. might be a bug, // but I am very not interested in fixing that today. - "j 0f", + // + // Also note that labels can only be numbers from 0-99, and, due to an llvm + // bug, labels made exclusively of 0 or 1 should be avoided because they get + // interpreted as binary numbers. dat's some jank in the tank!! + "j 90f", "nop", - "j 1f", + "j 91f", "nop", - "j 2f", + "j 92f", "nop", - "j 3f", + "j 93f", "nop", // mach 0 code - "0:", + "90:", // x26 sets the GPIO mask "li x2, 0xFF", // load constants into r0-15 bank first "mv x26, x2", // it's not legal to do anything other than mv to x26 @@ -92,7 +96,7 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END, "mv x20, zero", "j 4b", // mach 1 code - "1:", + "91:", "li x2, 0xFF00", "mv x26, x2", "add x1, zero, 0x20", @@ -102,7 +106,7 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END, "mv x20, zero", "j 5b", // mach 2 code - "2:", + "92:", "li x2, 0xFF0000", "mv x26, x2", "add x1, zero, 0x30", @@ -112,7 +116,7 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END, "mv x20, zero", "j 6b", // mach 3 code - "3:", + "93:", "li x2, 0xFF000000", "mv x26, x2", "add x1, zero, 0x40", @@ -122,3 +126,69 @@ bio_code!(multiverse_code, MULTIVERSE_START, MULTIVERSE_END, "mv x20, zero", "j 7b" ); + +pub fn fifo_basic() { + report_api(0x1310_2000); + report_api(0xf1f0_0000); + + let mut bio_ss = BioSharedState::new(); + // stop all the machines, so that code can be loaded + bio_ss.bio.wo(utra::bio::SFR_CTRL, 0x0); + let code = fifo_basic_code(); + bio_ss.load_code(code, 0); + + // configure & run the 0th machine + // / 16. clock + bio_ss.bio.wo(utra::bio::SFR_QDIV0, 0x23_BE00); + bio_ss.bio.wo(utra::bio::SFR_QDIV1, 0x33_1200); + // snap GPIO outputs to the quantum + bio_ss.bio.wo(utra::bio::SFR_CONFIG, + bio_ss.bio.ms(utra::bio::SFR_CONFIG_SNAP_TO_QUANTUM, 1) + | bio_ss.bio.ms(utra::bio::SFR_CONFIG_SNAP_TO_QUANTUM, 2) // arbitrary choice, they should all be the same + ); + // start all the machines, all at once + bio_ss.bio.wo(utra::bio::SFR_CTRL, 0xfff); + + report_api(0x1310_20FF); +} + +bio_code!(fifo_basic_code, FIFO_BASIC_START, FIFO_BASIC_END, + "j 90f", + "nop", + "j 91f", + "nop", + "j 92f", + "nop", + "j 93f", + "nop", + // mach 0 code + "90:", + "li x2, 0xFFFF", + "mv x26, x2", + "li x1, 0x10000000", + "li x2, 0x10000", + "11:", + "mv x16, x1", + "mv x21, x17", + "add x1, x1, x2", + "mv x20, zero", + "j 11b", + // mach 1 code + "91:", + "li x2, 0xFFFF0000", + "mv x26, x2", + "li x1, 0x8000", + "21:", + "mv x17, x1", + "mv x21, x16", + "addi x1, x1, 1", + "mv x20, zero", + "j 21b", + // mach 2 code + "92:", + "j 92b", + // mach 3 code + "93:", + "j 93b", + "nop" +); \ No newline at end of file