2013-11-27 19:53:38 +00:00
|
|
|
Change Log for Releases
|
|
|
|
|
==============================
|
|
|
|
|
|
2019-10-11 04:21:09 +00:00
|
|
|
## 003.015.000.000
|
2019-10-14 18:03:07 +00:00
|
|
|
* N320: Fix MCR initialization, fix checks for LO distribution board,
|
|
|
|
|
reset RX IQ balance on init, replace DRAM FIFO with replay block,
|
|
|
|
|
improve constraints, fix I/Q imbalance compensation
|
|
|
|
|
* N310: increase default dc offset averaging window, make tunes
|
|
|
|
|
asynchronous, add capability to control RF filter bypass and freq.band
|
|
|
|
|
limits, fix setting user DB EEPROM, correctly report N321 vs N320,
|
|
|
|
|
improve DDR3 BIST, update max revision to 7, fix DMA arbitration to
|
|
|
|
|
use contiguous packets, replace DRAM FIFO with replay block, fix SFP
|
|
|
|
|
link up status, add workaround for clocking interference with external
|
|
|
|
|
reference clocks, disable gpsdo clock/time source options when
|
|
|
|
|
enable_gps=0
|
2019-10-11 04:21:09 +00:00
|
|
|
* X310: Fix max bitfile size, fix GPIO ATR property access type, heavily
|
|
|
|
|
refactor, introduce conn_mgr, add DPDK support, add
|
2019-10-14 18:03:07 +00:00
|
|
|
capability to flash NI-2974 FPGA, fix clocking code, enable 11.52 MHz
|
|
|
|
|
and 23.04 MHz system ref rates, improve usage of constrained device
|
|
|
|
|
args, enable ADC gain through RFNoC API, add mode to set master clock
|
|
|
|
|
rate to arbitrary values between 184.32 and 200 MHz
|
2019-10-11 04:21:09 +00:00
|
|
|
* E320: Fix time source clobbering ref source, add support for RevE, fix
|
2019-10-14 18:03:07 +00:00
|
|
|
reporting of FPGA version hash, fix SFP link up status, fix missing
|
|
|
|
|
ce_clk driver
|
2019-10-11 04:21:09 +00:00
|
|
|
* E310: Convert to MPM architecture, fix uhd_image_loader usage, fix DMA
|
2019-10-14 18:03:07 +00:00
|
|
|
arbitration to use contiguous packets, reduced DMA chans to 4 (using
|
|
|
|
|
data stream muxing), fix DRAM_TEST target build
|
|
|
|
|
* B200: Add command to query bootloader status, fix sc12 streaming, fix
|
|
|
|
|
FIFO sizes on GPIFII interface
|
2019-10-11 04:21:09 +00:00
|
|
|
* UBX: add temperature compensation mode
|
|
|
|
|
* SBX: Only update ATRs when lock state changes
|
2019-10-14 18:03:07 +00:00
|
|
|
* TwinRX: add LO charge pump properties, increase default charge pump
|
|
|
|
|
value on LO1, add low spur tuning mode, fix duplicate write to N value
|
|
|
|
|
in DDC
|
|
|
|
|
* RFNoC/device3: Read command FIFO size from device instead of
|
|
|
|
|
hardcoding values, fix multidevice graph connections, ENABLE_RFNOC now
|
|
|
|
|
defaults to ON, search all nodes for tick rate, add update_graph()
|
|
|
|
|
call which lets blocks do a graph-wide update of properties, fix
|
|
|
|
|
missing port arg in SR_WRITE Noc-Script call, constrain
|
|
|
|
|
send/recv_frame_size baed on MTU, fix flushing on init/deinit, disable
|
|
|
|
|
FC ACKs for lossless links
|
|
|
|
|
* RFNOC/FPGA: Fix rb_stb in split stream block, fix off-by-one error in
|
|
|
|
|
the window block, fix phase reset and -accumulator for DDC and DUC
|
|
|
|
|
blocks, fix flushing on split-stream block, fix DC offset issue with
|
|
|
|
|
DDS by using proper rounding, fix DUC/DDC sample rate switching by
|
|
|
|
|
latching N on M in axi_rate_change, various fixes to
|
|
|
|
|
uhd_image_builder, fix MTU settings in blocks, align byte count to
|
|
|
|
|
8-byte word
|
|
|
|
|
* Python API: Replace Boost.Python with PyBind11, fix benchmark_rate
|
|
|
|
|
statistics, fix phase alignment test script
|
|
|
|
|
* UHD: Allow ignoring fallthrough warnings, reduce Boost footprint,
|
|
|
|
|
remove gpsd dependency, improve streaming, reduced the number of
|
|
|
|
|
compiler warnings, introduce pop() to the prop tree
|
|
|
|
|
* MPM/mpmd: Introduce compatible rev numbers to support future hardware,
|
|
|
|
|
fix some resource leaks in mpmd, fix spurious reclaims causing
|
|
|
|
|
unnecessary warnings, fix resource leaks in liberio xport, allow to
|
|
|
|
|
mux data streams over liberio transports (e.g. to require fewer DMA
|
|
|
|
|
channels on E310), wait for DPDK links to come up before proceeding,
|
|
|
|
|
relax failure handling when updating components (fixes spurious errors
|
|
|
|
|
when updating FPGA images over SFP)
|
|
|
|
|
* FPGA: Use new device-tree overlay syntax, upgraded to Vivado 2018.3,
|
|
|
|
|
broke various paths with critical timing, allow SystemVerilog source
|
|
|
|
|
files, improve viv_modify_bd and viv_modify_tcl_bd, fix resets on 2clk
|
|
|
|
|
FIFOs
|
2019-10-11 04:21:09 +00:00
|
|
|
* USB: Allow cancelled USB requests to occur
|
|
|
|
|
* Logging: Always honour log level, don't log colours for non-ttys, fix
|
2019-10-14 18:03:07 +00:00
|
|
|
includes, demote various log messages, fix logging colours, fix
|
|
|
|
|
deadlock on Windows machines
|
|
|
|
|
* Examples: Fix benchmark_rate INIT_DELAY, fix memory leak in
|
|
|
|
|
tx_samples_c
|
|
|
|
|
* Tests: Make the Python interpreter for devtests a parameter, add unit
|
|
|
|
|
tests to MPM
|
2019-10-11 04:21:09 +00:00
|
|
|
* Utilities: Fix converter benchmark for Py3k and scaling issue
|
|
|
|
|
* Tools: Fix kitchen_sink
|
|
|
|
|
* Docs: Various fixes, fix Doxygen warnings, fix links to KB
|
|
|
|
|
* C API: Add uhd_get_abi_string, uhd_get_version_string
|
2019-10-14 18:03:07 +00:00
|
|
|
* CMake: Make manpage compression optional, allow setting of PKG_DOC_DIR
|
|
|
|
|
from the CMake commandline, add replay example, fix missing 'project',
|
|
|
|
|
replace ENABLE_PYTHON3 with a simpler Python detection, clean up
|
|
|
|
|
superfluous modules, improve log statements, bump dependency min
|
|
|
|
|
versions, add MPM unit testing, fix missing BIGOBJ for MSVC
|
2019-10-11 04:21:09 +00:00
|
|
|
* Formatting: Apply clang-format to all files, break after template<>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## 003.014.001.000
|
|
|
|
|
N320: Terminate the DAC when not transmitting
|
|
|
|
|
E320: Add support for rev E
|
|
|
|
|
E320: Added .gitignore for FPGA build products
|
|
|
|
|
X300: Add DPDK support
|
|
|
|
|
X300: add capability to flash NI-2974 FPGA
|
|
|
|
|
X300: Broke two critical timing paths in FPGA
|
|
|
|
|
X300: fixed udp WSA buffer size assignment issue
|
|
|
|
|
E310: Fix DRAM_TEST target build
|
|
|
|
|
B200: Add bootloader for FX3 (fix for B2xx failing to enumerate)
|
|
|
|
|
TwinRX: Expose charge pump current for LO2
|
|
|
|
|
TwinRX: Add low spur mode for LO2
|
|
|
|
|
TwinRX: increase rev c lo1 charge pump default value
|
|
|
|
|
TwinRX: Fix tick rate
|
|
|
|
|
Device3: Constraint send/recv_frame_size based on down/upstream MTU
|
|
|
|
|
Device3: Fix MTU and default frame sizes
|
|
|
|
|
RFNoC: Search all nodes for tick rates
|
|
|
|
|
RFNoC: Change default address for the reg readbacks
|
|
|
|
|
uhd_image_builder: Let the OOT module point to folders not named "rfnoc"
|
|
|
|
|
uhd_image_builder: Add --auto-inst-src
|
|
|
|
|
MPMD: Fix spurious reclaim call after unclaim
|
|
|
|
|
MPMD: Release resources on destruction
|
|
|
|
|
MPM: Add SW/HW compat
|
|
|
|
|
liberio: Release context holder on destruction of last liberio xport
|
|
|
|
|
transport: fixed a pre-mature buffer reset
|
|
|
|
|
nirio: Fix typo in nirio_zero_copy
|
|
|
|
|
GPSD: fix API for 'gps_read'
|
|
|
|
|
AD9361: Fix return values for tune and set_clock_rate
|
|
|
|
|
DUC/DDC: Fix phase reset and accumulation
|
|
|
|
|
cores: Use NSDMI consistently in ?x_dsp_core_3000.*
|
|
|
|
|
Logging: fix deadlock issue on Windows machines
|
|
|
|
|
Logging: Fix ANSI colour codes
|
|
|
|
|
Utils: Add X300/X310 reset utility
|
|
|
|
|
Docs: Improved Windows-related build instructions
|
|
|
|
|
Docs: Add link to README for building custom filesystems for N3xx
|
|
|
|
|
sim: Fixing the port number in use for connection
|
|
|
|
|
tools: Fix for proj creation in ip_utils for tcl-based IP
|
|
|
|
|
tests: Fix mock_ctrl_iface for 32-bit MSVC
|
|
|
|
|
|
2019-02-02 02:40:54 +00:00
|
|
|
## 003.014.000.000
|
2019-10-11 04:21:09 +00:00
|
|
|
* N320: Add support for N320 and N321
|
|
|
|
|
* USRP-2974: Add support for USRP-2974
|
|
|
|
|
* DPDK: Add DPDK-based sockets-like library (for N3xx)
|
2019-02-02 02:40:54 +00:00
|
|
|
* N3xx: clocking API changes for transitioning clock and time sources
|
2019-10-11 04:21:09 +00:00
|
|
|
* N3xx: Bump max rev to G/6
|
|
|
|
|
* N3xx: Improve error messages for invalid clock/time settings
|
|
|
|
|
* N3xx: Get RFNoC crossbar baseport from FPGA
|
|
|
|
|
* N3xx: init peripherals before loading FPGA (to fix SFP0 init issues)
|
|
|
|
|
* N3xx: Move Linux kernel to 4.15
|
|
|
|
|
* N3xx/E320: Prepend SDK filename with device name
|
|
|
|
|
* N3xx: Update max rev to 7 (H)
|
|
|
|
|
* N3xx: Remove DDR3 from standard BIST collection
|
|
|
|
|
* N3xx: BIST: Improve DDR3 BIST to check for DmaFIFO
|
|
|
|
|
* N3xx: BIST: Auto-load the AA image for the ddr3 BIST
|
|
|
|
|
* N3xx: BIST: DDR3 test only enumerates first block
|
|
|
|
|
* N310: Modify AD9371 reset function to keep it in reset
|
|
|
|
|
* N310: move init_rf_cal before JESD de/framer bringup
|
|
|
|
|
* N310: Fix sporadic power on failures (requires firmware update)
|
|
|
|
|
* E3xx: Increase spp limit for E3xx radio
|
2019-02-02 02:40:54 +00:00
|
|
|
* E320: bist: Fix ref_clock lock test implementation
|
|
|
|
|
* E320: bist: Add link_up test
|
|
|
|
|
* E320: Add all 5 temp sensors, fan sensor and rssi sensors per channel
|
|
|
|
|
* E320: Fix tx/rx atr - antenna and frequency settings
|
|
|
|
|
* E320: Enable devtest for E320
|
2019-10-11 04:21:09 +00:00
|
|
|
* E320: images: Separate images package for Aurora image
|
|
|
|
|
* E320: Get RFNoC crossbar baseport from FPGA
|
|
|
|
|
* E320: add fpga_version_hash to e320 device info
|
|
|
|
|
* E310: Fix initialization of antenna and frequency values
|
|
|
|
|
* E31x: Destruct RFNoC before loading idle image
|
|
|
|
|
* X300: Reduce default send_frame_size to 4000 over Ethernet
|
|
|
|
|
* X300: Change Ethernet buffering
|
|
|
|
|
* X300: Log git hash and compat number as debug message
|
2019-02-02 02:40:54 +00:00
|
|
|
* X300: Move defaults to their own header
|
|
|
|
|
* X300: Use constrained_args
|
|
|
|
|
* X300: Enable clock_source and time_source device args
|
2019-10-11 04:21:09 +00:00
|
|
|
* X300: NIRIO: Demote RPC client cancel/abort to TRACE
|
|
|
|
|
* X300: remove default_buff_args properties
|
|
|
|
|
* X300: Remove 120 MHz master_clock_rate option
|
|
|
|
|
* X300: Set minimum master clock rate to 184.32 MHz
|
|
|
|
|
* X300: Factor our PID -> MB type and MB type -> product name mapping
|
|
|
|
|
* X300: Remove usage of boost::bind
|
|
|
|
|
* X300: Fix compiler warnings related to type conversions
|
|
|
|
|
* X300: Fix tick and sample rate setting
|
|
|
|
|
* X300: Enable ADC gain through RFNoC API
|
|
|
|
|
* X300: Demote NIRIO rpc client start/stop log messages to DEBUG
|
|
|
|
|
* X300: Enable 11.52 MHz and 23.04 MHz system ref rates
|
|
|
|
|
* X300: Enable x300_device_args.to_string()
|
|
|
|
|
* X300: Catch more inconsistencies in x300_device_args
|
|
|
|
|
* X300: Removed invalid 200 MHz sysref rate
|
|
|
|
|
* X300: Change PLL CP currents in x300_clock_ctrl
|
2019-02-02 02:40:54 +00:00
|
|
|
* B200: Remove superfluous fake lambda
|
|
|
|
|
* B200: Add support for user regs
|
2019-10-11 04:21:09 +00:00
|
|
|
* B200: Fix compiler warnings related to type conversions
|
|
|
|
|
* B100: Move fifo_ctrl_excelsior to b100 subdir
|
|
|
|
|
* B100: Fix fifo_ctrl_excelsior not exiting
|
|
|
|
|
* B100: Remove all Boostisms from fifo_ctrl_excelsior
|
|
|
|
|
* B100: Demote some clocking-related log messages to trace
|
|
|
|
|
* MPM: Get list of temperatures from all thermal zones
|
2019-02-02 02:40:54 +00:00
|
|
|
* MPM: add link_speed xport_info
|
2019-10-11 04:21:09 +00:00
|
|
|
* MPM: Add __mpm_device__ as usrp_hwd module variable
|
|
|
|
|
* MPM: Add usrp_update_fs
|
|
|
|
|
* MPM: Add i2c APIs for simple transfers
|
|
|
|
|
* MPM: Add vector-based transfer function for i2c
|
|
|
|
|
* MPM: Add variable configuration support to nijesdcore
|
|
|
|
|
* MPM: Add eyescan utility to nijesdcore
|
|
|
|
|
* MPM: Add PRBS-31 testing to nijesdcore
|
|
|
|
|
* MPM: Add convenience function to pull i2c bus from device tree
|
|
|
|
|
* MPM: Open and close i2c file descriptor on every access
|
|
|
|
|
* MPM: Multiprocessing instead of threading for claimer loop
|
|
|
|
|
* MPM: Factor out user EEPROM code into own module
|
|
|
|
|
* MPM: Add gpgga sensor function to GPSd iface
|
|
|
|
|
* MPM: Add bridge mode support
|
|
|
|
|
* MPM: Parameterize max UDP link allocation
|
|
|
|
|
* MPM: xport: add commit_xport docstring
|
|
|
|
|
* MPM: Improve error message on double-claim
|
|
|
|
|
* MPMD: Parallelize broadcast-finding
|
|
|
|
|
* MPMD: add option to enum rfnoc blocks from args
|
2019-02-02 02:40:54 +00:00
|
|
|
* MPMD: add link speed to xport udp
|
2019-10-11 04:21:09 +00:00
|
|
|
* MPMD: Add API to set RPC timeout atomically
|
|
|
|
|
* MPMD: Move timeout constants to header
|
|
|
|
|
* MPMD: Use new RPC API with timeout
|
|
|
|
|
* MPMD: Increase claim_rpc call timeout
|
|
|
|
|
* MPMD: implement get_*x_hints
|
|
|
|
|
* MPMD: honor user supplied send/recv_frame_size args
|
|
|
|
|
* MPMD: Use 4096 bytes for frame size for liberio transport
|
|
|
|
|
* MPMD: Use init timeout for update_component
|
|
|
|
|
* MPMD: Allow reclaim failures on component updates
|
|
|
|
|
* MPMD: Fix typecast warning in property tree default settings
|
|
|
|
|
* Device: Parallelize device discovery
|
|
|
|
|
* Device3: Move from packet-based to byte-based flow control
|
|
|
|
|
* Device3: Constrain send_buff_size to input fifo size
|
2019-02-02 02:40:54 +00:00
|
|
|
* Device3: remove tx_hint[send_buff_size]
|
2019-10-11 04:21:09 +00:00
|
|
|
* Device3: Replace NULL with 0 for empty function pointers
|
|
|
|
|
* Device3: Remove redundant function call
|
|
|
|
|
* Device3: Fix flow control window and interval
|
|
|
|
|
* UHD: Release recv buffers earlier in rx_streamer
|
|
|
|
|
* UHD: Fix ADF400x driver for ref counter and charge pump mode
|
|
|
|
|
* UHD: Improve constrained_device_args_t
|
|
|
|
|
* UHD API: Add multi_usrp::get_user_settings_iface()
|
|
|
|
|
* UHD: Remove usage of time_t (except when required)
|
|
|
|
|
* UHD: add default xport params to udp_zero_copy
|
2019-02-02 02:40:54 +00:00
|
|
|
* UHD: Update rx_frontend_gen3.v controls for 1/4-rate mixer
|
|
|
|
|
* UHD API: Move definition of ALL_MBOARDS and ALL_CHANS constants to
|
|
|
|
|
CPP file.
|
|
|
|
|
* UHD: Add traffic counter to null source sink
|
|
|
|
|
* UHD API: Add multi_usrp::set_sync_source() API
|
|
|
|
|
* UHD: Improve documentation for the UHD exception types
|
|
|
|
|
* UHD: Improve documentation for set_{time,clock,sync}_source
|
|
|
|
|
* UHD: add .clang-format file
|
|
|
|
|
* UHD: Add device arg to enable dual ethernet for tx
|
|
|
|
|
* UHD API: Add sync source to Python API
|
2019-10-11 04:21:09 +00:00
|
|
|
* UHD API: Add support for Tx LO control to C API
|
2019-02-02 02:40:54 +00:00
|
|
|
* UHD: Improve compatibility of abs() calls
|
|
|
|
|
* UHD: include <stdint.h> for int64_t for time_spec
|
|
|
|
|
* UHD: Updates to coding guidelines
|
|
|
|
|
* UHD: Fix MSVC warnings by changing a size_t to unsigned int or
|
|
|
|
|
uint32_t
|
|
|
|
|
* UHD: Add potentially missing but sometimes inferred include for
|
|
|
|
|
experts
|
|
|
|
|
* UHD: Add default xport params to udp_wsa_zero_copy
|
|
|
|
|
* UHD: Move device3 flow control functions to header for benchmark
|
|
|
|
|
utility
|
|
|
|
|
* UHD: Make sure BOOST_VERSION is always available
|
|
|
|
|
* UHD: Make clang-format skip formatting for some data structures
|
|
|
|
|
* UHD: Remove vim hints in headers
|
|
|
|
|
* UHD/MPM: Apply clang-format to all files
|
|
|
|
|
* UHD: Add modified clang-format for headers
|
|
|
|
|
* UHD: Replace uhd::math::log2 with std::log2
|
|
|
|
|
* UHD: Replace boost::*::{lcm,gcd}() with portable versions
|
|
|
|
|
* UHD API: Change get_{tx/rx}_dc_offset_range default from ALL_CHANS
|
|
|
|
|
to 0
|
|
|
|
|
* UHD: Revert to boost instead of std for sleep in some instances
|
|
|
|
|
* UHD: Replace Boost macros with custom ones for endianness
|
|
|
|
|
* UHD: muxed_zero_copy_if fixes
|
|
|
|
|
* UHD: Replace Boost lock & mutex with std variety for AD9361 code
|
2019-10-11 04:21:09 +00:00
|
|
|
* UHD: fix includes for boost::noncopyable
|
|
|
|
|
* UHD: Fix buffer size warning on UDP transport
|
|
|
|
|
* UHD: Remove duplicate operator=() for sid_t
|
|
|
|
|
* UHD: Fix conversion warning in max287x
|
|
|
|
|
* UHD: Fix various type-conversion compiler warnings
|
|
|
|
|
* RFNoC: Convert SR_READBACK_REG_FIFOSIZE to bytes
|
|
|
|
|
* RFNoC: Add ability to enable/disable RX timestamp
|
|
|
|
|
* RFNoC: add async message handler
|
|
|
|
|
* RFNoC: Changes to traffic counter register names
|
|
|
|
|
* RFNoC: Fix replay example port args
|
|
|
|
|
* RFNoC: Fix default SPP for replay
|
|
|
|
|
* RFNoC: Add halt to replay API
|
|
|
|
|
* RFNoC: Fix late packet errors
|
|
|
|
|
* RFNoC: Fix detection of outstanding acks by ctrl_iface
|
|
|
|
|
* RFNoC: Add some missing virtual destructors
|
2019-02-02 02:40:54 +00:00
|
|
|
* RFNoC: Update FIFO XML definition
|
|
|
|
|
* RFNoC: Prevent unnecessary FC ACK packets
|
|
|
|
|
* RFNoC: More graph traversal fixes
|
|
|
|
|
* RFNoC: Fix scaling of M and N values in DDC/DUC
|
|
|
|
|
* RFNoC: Fix typos in legacy_compat
|
|
|
|
|
* RFNoC: Limit number of control packets in flight
|
2019-10-11 04:21:09 +00:00
|
|
|
* RFNoC: Disable FC ACK packets for lossless links
|
|
|
|
|
* RFNoC: Add valid num_input_ports check to node_ctrl_base
|
|
|
|
|
* Utils: Add Zip test to downloader
|
|
|
|
|
* Utils: Factor wait_for_lo_lock() out of cal utils
|
|
|
|
|
* Utils: Add check for gdb_eeprom before accessing
|
|
|
|
|
* Utils: Deny positional options in uhd_image_loader
|
|
|
|
|
* Utils: Set tx gain to max for rx iq cal
|
|
|
|
|
* Tools: Add tool to analyze settling time of gain and freq changes
|
|
|
|
|
* Tools: Make the UHD source gen a plugin for the phase alignment test
|
|
|
|
|
* Test: Add Python API test
|
|
|
|
|
* Test: Integrate Python API Tester into Devtest
|
|
|
|
|
* Test: Add graph impl test to device3_test
|
|
|
|
|
* Test: Retrofit sph test to use new mock transport
|
|
|
|
|
* Test: Enable rx_samples_to_file in devtest for X300
|
|
|
|
|
* Test: Fix CMake `endif` warning for devtest
|
|
|
|
|
* Test: Fix compiler warning about unused timestamp
|
|
|
|
|
* Test: Add #include <thread> in system time test
|
|
|
|
|
* Test: Add benchmark of streaming code paths
|
|
|
|
|
* Test: replace has_key by using 'in'
|
|
|
|
|
* Test: Add universal_newlines to subprocess call in devtest
|
|
|
|
|
* Examples: add rfnoc_radio_loopback example
|
|
|
|
|
* Examples: Add benchmark_streamer example
|
|
|
|
|
* Examples: Add dual measurements to benchmark_streamer
|
|
|
|
|
* Examples: Clean up rfnoc_radio_loopback example
|
|
|
|
|
* Examples: Add keyboard controls to rx_ascii_art_dft
|
|
|
|
|
* Examples: Add benchmark_streamer support for multi-channel streamer
|
|
|
|
|
* Examples: Optimize benchmark_rate start time
|
|
|
|
|
* Examples: Improve formatting and comments in tx_waveforms
|
|
|
|
|
* Examples: Optimize tx_waveforms memory allocations
|
|
|
|
|
* Examples: change boost to std for time commands
|
|
|
|
|
* Examples: Add LO Offset to rx_samples_to_file
|
|
|
|
|
* Examples: update lo-offset naming in tx from file
|
|
|
|
|
* Examples: Add lo-offset to tx_waveforms
|
|
|
|
|
* Examples: Improved error message in tx_waveforms
|
|
|
|
|
* Examples: Move ascii_art_dft main function within include guard
|
|
|
|
|
* Examples: Fix boundary condition in ascii_art_dft plotting
|
|
|
|
|
* Docs: Fix Doxygen warnings
|
|
|
|
|
* Docs: Add info on how to implement user regs on B200
|
|
|
|
|
* Docs: Add manual page on compat numbers
|
|
|
|
|
* Docs: Add comments for TwinRX and MCR
|
|
|
|
|
* Docs: N3xx page shell formatting and bb image
|
|
|
|
|
* Docs: n3xx: fix Salt formatting
|
|
|
|
|
* Docs: Add note on manually disabling NEON extensions
|
|
|
|
|
* Docs: Fixed typos in N3xx image names (SD card build)
|
|
|
|
|
* Docs: Add notes on external reference frequencies for X300
|
|
|
|
|
* CMake: Bump CMake minimum version to 2.8.12
|
|
|
|
|
* CMake: Change SOVERSION and VERSION for the library files
|
|
|
|
|
* CMake: Extend list of additional Boost versions
|
|
|
|
|
* CMake: fix variable usage
|
|
|
|
|
* Cmake: remove Boost from dyn libs for tests on Apple
|
|
|
|
|
* Cmake: Fix MSVC options (add /bigobj)
|
|
|
|
|
* Cmake: Use native format for setup.py
|
|
|
|
|
* CPack: Fix RPM generation
|
2019-02-02 02:40:54 +00:00
|
|
|
|
2019-01-10 01:41:18 +00:00
|
|
|
## 003.013.001.000
|
|
|
|
|
* E320: Fix front panel GPIO readback
|
|
|
|
|
* E320: Fix master_clock_rate setting
|
|
|
|
|
* E320: Print extra ouptut for ref_clock BIST
|
|
|
|
|
* E320: Fix gps_locked type
|
|
|
|
|
* E320: Fix return value of get_fpga_type()
|
|
|
|
|
* N3xx: Enable setting clock and time sources at runtime
|
|
|
|
|
* N3xx: Add ref_clock BIST
|
|
|
|
|
* N3xx: Improve set_time_source() and set_clock_source()
|
|
|
|
|
* N3xx: Add exception for init failure
|
|
|
|
|
* N3xx: Remove HA, XA images packages
|
|
|
|
|
* N3xx: Change init() procedure to reduce configuration time
|
|
|
|
|
* N310: Add frequency bounds
|
|
|
|
|
* N310: Fix RX antenna mapping
|
|
|
|
|
* N310: Add log messages when re-initializing dboards
|
|
|
|
|
* N310: Add skip_rfic argument to reduce time of BIST
|
|
|
|
|
* N310: Add initialization of TX bandwidth
|
|
|
|
|
* E310: Fix initialization of antenna and frequency values
|
|
|
|
|
* E310: Type-cast fix for Boost
|
|
|
|
|
* X300: Improve firmware compat error message
|
|
|
|
|
* X300: Updated niusrprio driver
|
|
|
|
|
* X300: Add recovery for duplicate IP addresses in EEPROM
|
|
|
|
|
* X300: Prevent duplicate MAC and IP addresses from being programmed
|
|
|
|
|
* X300: New mode to configure master clock rate
|
|
|
|
|
* X300: Implement RFNoC get antenna functions
|
|
|
|
|
* B2xx: Fix values of MASK_GPIO_SHDN_SW and GPIO_AUX_PWR_ON in firmware
|
|
|
|
|
* B2xx: Revert changes to DSP core to fix scaling factor adjustment
|
|
|
|
|
* B2xx: Restore asynchronous reset of AD936x
|
|
|
|
|
(fixes LIBUSB_TRANSFER_OVERFLOW and unexpected sid errors)
|
|
|
|
|
* TwinRX: enable ch1 lo amps if ch2 is using an external lo source
|
|
|
|
|
* TwinRX: Correctly initialize antenna mapping on X300
|
|
|
|
|
* TwinRX: Revise ADF5356 frac2 register calculation to prevent drifting spurs
|
|
|
|
|
* TwinRX: Fix initialization
|
|
|
|
|
* TwinRX: Tuning improvements
|
|
|
|
|
* TwinRX: Enable phase resync on ADF535x
|
|
|
|
|
* TwinRX: Make routing to LO1 and LO2 mutually exclusive
|
|
|
|
|
* BasicRX/LFRX: Fix real mode in rx_frontend_core_3000
|
|
|
|
|
* UHD: Define UHD_API as empty string when building static lib
|
|
|
|
|
* UHD: Changed to 'all_matching' endpoint resolution for udp_simple transport
|
2019-02-02 02:40:54 +00:00
|
|
|
* UHD: Add CMake flag for NEON SIMD
|
2019-01-10 01:41:18 +00:00
|
|
|
* UHD: Fix usb_dummy_impl compilation in MSVC
|
|
|
|
|
* UHD: Reconcile time_spec operators with boost concepts
|
|
|
|
|
* UHD: Fix rounding in ddc/duc rate calculation
|
|
|
|
|
* UHD: Increase MPMD RPC timeout when calling set_time_source()
|
|
|
|
|
* UHD: Fix RX streamer SOB and EOB handling
|
|
|
|
|
* UHD: Add UHD_SAFE_CALL to block_ctrl_base destructor
|
|
|
|
|
* UHD: Change SOVERSION to ABI string and VERSION to full UHD version
|
|
|
|
|
* UHD: Update cmake style to use lower case commands
|
|
|
|
|
* UHD: Add SOURCE_DATE_EPOCH
|
|
|
|
|
* UHD: Improve logic for UHD_IMAGES_DIR
|
|
|
|
|
* UHD: Add RUNTIME_PYTHON_EXECUTABLE
|
|
|
|
|
* UHD: Fix return value of get_rolloff() for filters
|
|
|
|
|
* UHD: Properly register devtest
|
|
|
|
|
* UHD: Fix log statement for Port number on RFNoC block
|
|
|
|
|
* UHD: Use "MATCHES" instead of "STREQUAL" for "Clang"
|
|
|
|
|
* UHD: Fix GPGGA string formatting for gpsd
|
|
|
|
|
* Device3: Set default block control response SIDs
|
|
|
|
|
* Device3: Fix block control flushing
|
|
|
|
|
* RFNoC: Improved flushing mechanism in noc_shell and dma_fifo
|
|
|
|
|
* RFNoC: Install missing dma_fifo_block_ctrl header
|
|
|
|
|
* RFNoC: Replace some [] with .at() in radio_ctrl_impl
|
|
|
|
|
* RFNoC: Fix graph traversal
|
|
|
|
|
* MPM: Add Git hash, version to device info
|
|
|
|
|
* MPM: Reset the RPC server upon reload
|
|
|
|
|
* MPM: TDC: Update PDAC BIST and flatness test to use latest APIs
|
|
|
|
|
* MPM: Fix handling of 0-valued dt-compat
|
|
|
|
|
* MPM: Fix GPSD sensor names for N3xx and E320
|
|
|
|
|
* MPM: Add args to update_ref_clock_freq to properly support dynamic setting
|
|
|
|
|
* of clock and time references
|
|
|
|
|
* MPM: Fix Pylint warnings
|
|
|
|
|
* MPM: Identify sysfs gpios more generically
|
|
|
|
|
* MPM: Add lock_guard() function
|
|
|
|
|
* MPM: Factor E320 and N3xx BIST code into common module
|
|
|
|
|
* MPM: Add gpsd error handling
|
|
|
|
|
* MPM: Add FPGA git hash to device info
|
|
|
|
|
* MPMD: Increase RPC timeout during readng mb sensor
|
|
|
|
|
* MPMD: Improve error message for compat number mismatches
|
|
|
|
|
* Python API: Enable Python API on Windows
|
|
|
|
|
* Python API: Change .dll to .pyd for Win32
|
|
|
|
|
* Python API: Fixing Boost.Python initializer visibility
|
|
|
|
|
* Python API: Fix duration of benchmark rate
|
|
|
|
|
* Python API: Add missing constructors of time_spec_t
|
|
|
|
|
* Python API: Expose streamer timeouts
|
|
|
|
|
* Python API: Tighten the scope of releasing the GIL
|
|
|
|
|
* Python API: Add device_addr_t
|
|
|
|
|
* Python API: Populate the tune_result_t binding
|
|
|
|
|
* Utils: Many fixes and enhancements for uhd_images_downloader
|
|
|
|
|
* Utils: Update query_gpsdo_sensors to work on E310
|
|
|
|
|
* Examples: Removed some legacy code patterns from RFNoC examples
|
|
|
|
|
* Examples: Fix channel argument for rx_samples_to_file
|
|
|
|
|
* Examples: Fix benchmark_rate MIMO synchronization
|
|
|
|
|
* Examples: Add phase alignment example
|
|
|
|
|
* Examples: Fix RX antenna not being applied in txrx_loopback_to_file
|
|
|
|
|
* Test: Add more env vars, make Py3k compatible
|
|
|
|
|
* Test: Add multi_usrp_test.py to devtest
|
|
|
|
|
* Test: Clean up, refactor, and improve devtest
|
|
|
|
|
* Test: Enable rx_samples_to_file in E320 devtest and N3xx devtest
|
|
|
|
|
* Test: Reduce sample rate for E320 1G devtest
|
|
|
|
|
* Test: Add unit test for eeprom_utils
|
|
|
|
|
* Docs: Add clock_source and time_source to n3xx argument list and fix WR clock_source call
|
|
|
|
|
* Docs: Minor tweaks to the Python API manual page
|
|
|
|
|
* Docs: Add E320 test procedures
|
|
|
|
|
* Docs: Added TwinRX page
|
|
|
|
|
* Docs: Fix N210 MIMO Phase Alignment test command
|
|
|
|
|
* Docs: Add E320 information
|
|
|
|
|
* Docs: Improve sections on clock/time references
|
|
|
|
|
* Docs: Add section on X300 motherboard clocking
|
|
|
|
|
* Docs: Add more information on Salt for N3xx and E320
|
|
|
|
|
* Docs: Adjust E310 functional verification tests
|
|
|
|
|
* Docs: Add documentation on GIL release
|
|
|
|
|
* Debian: Update control files
|
|
|
|
|
* Images: Add N3xx CPLD file to manifest
|
|
|
|
|
|
2018-09-14 00:30:13 +00:00
|
|
|
## 003.013.000.002
|
|
|
|
|
* N3xx: Fix issue where changing the clock/time source could result in
|
|
|
|
|
clocks becoming unlocked
|
|
|
|
|
* N3xx: Improve error messages for invalid clock/time settings
|
|
|
|
|
* N3xx: Add support for Rev G mboard
|
|
|
|
|
* MPM: Add function parameter to support holding AD9371 in reset
|
|
|
|
|
* Docs: Add section on building fs/SD images for N3xx
|
|
|
|
|
* Docs: Fix Doxygen warnings
|
|
|
|
|
|
|
|
|
|
## 003.013.000.001
|
|
|
|
|
* N3xx: Fix UIO usage in Aurora BIST
|
|
|
|
|
* N3xx: Fix EEPROM parsing (for upcoming hardware)
|
|
|
|
|
* UHD: Fix install path for Python API
|
|
|
|
|
|
2018-07-19 14:46:16 +00:00
|
|
|
## 003.013.000.000
|
|
|
|
|
* N3x0: Enable fast-reinit, fix power level issue, accept 0x01 PID for
|
|
|
|
|
AD9371, fix concurrency issues with Liberio
|
|
|
|
|
* B200: Fix sc8/sc12 modes, fix frame-size related issues, fix tick rate
|
|
|
|
|
coercion, fix issues on update of tick rate, fix EOB-not-seen
|
|
|
|
|
issue
|
|
|
|
|
* E310: Move to RFNoC architecture (this disables network mode!)
|
|
|
|
|
* UBX: Fix phase synchronization for 184.32 MHz master clock rate,
|
|
|
|
|
* multi_usrp: Fix get_?x_info() API calls
|
|
|
|
|
* UHD: Remove more Boost usage, fix some compiler warnings, default to
|
|
|
|
|
all-channels subdev specs for X3x0 and N3x0, various LMX2592
|
|
|
|
|
fixes, bump minimum CMake to 2.8.2, fix logging dtor issues
|
|
|
|
|
* RFNoC: Merge all existing RFNoC features into master
|
|
|
|
|
* FPGA: Fix various testbenches, add batch testbench execution mode,
|
|
|
|
|
improve uhd_image_builder and uhd_image_builder_gui, add all
|
|
|
|
|
existing RFNoC features
|
|
|
|
|
* Add Python API
|
|
|
|
|
* MPM: Enable Rev2 EEPROM format, fix some rare issues when detecting
|
|
|
|
|
Ethernet devices
|
|
|
|
|
* CMake: Allow to override UHD_GIT_BRANCH, fix Python-finding logic, add
|
|
|
|
|
ENABLE_N300 target
|
|
|
|
|
|
2018-05-15 02:03:15 +00:00
|
|
|
## 003.012.000.000
|
|
|
|
|
* N3x0: Add White Rabbit support, add N300 support, standard BIST
|
|
|
|
|
includes fan, fix issue with 1GigE, switch to 2 radio blocks
|
2018-06-05 17:40:12 +00:00
|
|
|
with 2 channels each, upgrade TDC to version 2.0, fix issue in
|
|
|
|
|
ARM deframer
|
2018-05-15 02:03:15 +00:00
|
|
|
* X300: Enable BasicRX to use A/B/AB/BA muxing setups, more consistent
|
2018-05-17 19:12:53 +00:00
|
|
|
logging, fix enumeration issue with TwinRX
|
2018-05-15 02:03:15 +00:00
|
|
|
* USRP2/N2x0: Re-add ability to modulate in the DAC, improve ISE
|
|
|
|
|
settings to better meet timing
|
|
|
|
|
* B205mini: Fix global reset, improve timing in b205_ref_pll
|
|
|
|
|
* UHD: Remove a lot of Boost usage, mostly replaced by C++11 features,
|
|
|
|
|
more unit tests, fix Boost 1.67 compatibility, fix compiler
|
2018-05-17 19:12:53 +00:00
|
|
|
warnings, add API to query clock rate range, fix get_usrp_?x_info
|
2018-05-15 02:03:15 +00:00
|
|
|
* MPM: Refactored N3xx code, moved C++ standard to 14, refactor
|
|
|
|
|
Boost.Python bindings, use CMake variable MPM_DEVICE
|
|
|
|
|
* Logging: Allow disabling fastpath msgs at runtime
|
|
|
|
|
* Docs: Clarified meaning of DSP frequencies, improved manual
|
|
|
|
|
section on synchronization, added some known issues to B100,
|
2018-05-17 19:12:53 +00:00
|
|
|
USRP2, and USRP1, update test test procedure description
|
2018-05-15 02:03:15 +00:00
|
|
|
* Examples: Improved benchmark_rate (added failure thresholds, fixed
|
|
|
|
|
incorrect calculation of samples on drops, fixed timeout values),
|
|
|
|
|
minor fixes to txrx_loopback_to_file
|
|
|
|
|
* Utils: Handle U's in calibration tools, create-lvbitx.py is now Py3k
|
|
|
|
|
compatible, fixed git-hash.sh
|
|
|
|
|
* RFNoC: DDCs/DUCs use DDSes instead of CORDIC, add DMA-based replay
|
|
|
|
|
block in FPGA, add 64-bit support to axi_wrapper, add compat
|
|
|
|
|
number to radio block,
|
2018-05-17 19:12:53 +00:00
|
|
|
* Debian: Fix rules file, fix Changelog format
|
2018-05-15 02:03:15 +00:00
|
|
|
* Fix license headers
|
|
|
|
|
* This release includes all bugfixes and features from previous
|
|
|
|
|
releases, in particular, the 3.11.* release cycle
|
2018-06-05 17:40:12 +00:00
|
|
|
* Known issues: N310: In some rare scenarios at high rates, streaming
|
|
|
|
|
can fail and even bring the FPGA into a bad state.
|
2018-05-15 02:03:15 +00:00
|
|
|
|
2018-05-10 16:50:48 +00:00
|
|
|
## 003.011.001.000
|
|
|
|
|
* N310: fix compiler warnings
|
|
|
|
|
* N310: Implement digital loopback
|
|
|
|
|
* N3xx: Add N3xx devtest
|
|
|
|
|
* X300: Properly coerce master clock rate (tick rate)
|
|
|
|
|
* X300: handle bad weak_ptr during pcie discovery
|
|
|
|
|
* X300: handle bad weak_ptr during pcie discovery
|
|
|
|
|
* X300: Fix check_radio_config() to fix errors when using a single dboard
|
|
|
|
|
in slot A
|
|
|
|
|
* B200: docs: Suggest modifying recv_frame_size for more stability
|
|
|
|
|
* B200: Fix bandwidth warnings and ranges
|
|
|
|
|
* N2xx: Fix regression issue that limited tuning range
|
|
|
|
|
* UBX: Change antenna functions to coercers on antenna/value properties
|
|
|
|
|
* adf4002: Fix register programming for power down bit
|
|
|
|
|
* UHD: Fix config file path for some Windows builds
|
|
|
|
|
* UHD: Add operators == and != for uhd::dict
|
|
|
|
|
* UHD: Add device_addr_t constructor from map
|
|
|
|
|
* UHD: Fix range of gain group to skip gains with zero step
|
|
|
|
|
* UHD: Changes to support Boost 1.67
|
|
|
|
|
* UHD: Correctly set end of burst flag in RX metadata
|
|
|
|
|
* UHD: Reduce usage of boost::assign, boost::this_thread::sleep, and boost:bind
|
|
|
|
|
* UHD: Update multi_usrp::get_usrp_?x_info() for MPM devices
|
|
|
|
|
* UHD: Refactor static const values to fix linker errors in niusrprio
|
|
|
|
|
* mpm: cmake: Add git hash and version info to Python module
|
|
|
|
|
* mpm: Add reference counters to UIO
|
|
|
|
|
* mpm: Add offset to EEPROM reads
|
|
|
|
|
* mpm: Disable PPS out during initialization
|
|
|
|
|
* mpm: Update cmake to find the correct python3
|
|
|
|
|
* mpm: Bump maximum supported revision to 5 (Rev F)
|
|
|
|
|
* mpm: Fixed db slot typo in db-id
|
|
|
|
|
* mpm: Increased claim timeout, made a separate RPC connection for claim, and
|
|
|
|
|
added asyn calls for long RPC executions
|
|
|
|
|
* mpm: Improve xport<->SFP mapping algorithm
|
|
|
|
|
* mpmd: Improved find routine to fail fast and verify correct device is
|
|
|
|
|
reachable
|
|
|
|
|
* mpmd: Add missing virtual destructors
|
|
|
|
|
* rfnoc/x300: Make sure peek32() and peek64() are called with actual addresses
|
|
|
|
|
* rfnoc: ctrl_iface cleanup
|
|
|
|
|
* rfnoc radio: Improve warning for too many samples requested
|
|
|
|
|
* rfnoc radio: get_rx_stream resets sequence num
|
|
|
|
|
* examples: Increase settling time, increase buffer fill time, and fix subdevice
|
|
|
|
|
selection in txrx_loopback_to_file
|
|
|
|
|
* examples: Improvements to benchmark_rate
|
|
|
|
|
* utils: downloader supports multiple RegExs
|
|
|
|
|
* utils: Added code to handle underruns during self calibration
|
|
|
|
|
* utils: Fix 30s tiemout in query_gpsdo_sensors
|
|
|
|
|
* logging: Improve style consistency and demote some messages
|
|
|
|
|
* logging: Fix UHD_LOG_FILE cmake variable
|
|
|
|
|
* Docs: Add Known Issues section to USRP1, B100, and USRP2/N2x0
|
|
|
|
|
* Docs: Hide dependencies directory from Doxygen
|
|
|
|
|
* Docs: Clarify subdev specs and magnesium driver usage for N300/N310
|
|
|
|
|
* cmake: Improve warning for missing requests
|
|
|
|
|
* cmake: update NSIS template
|
|
|
|
|
* cmake: Remove images downloader section (replaced by manifest)
|
|
|
|
|
|
2018-03-28 22:21:09 +00:00
|
|
|
## 003.011.000.001
|
|
|
|
|
* N300: Added driver support (includes some refactoring of N3xx
|
|
|
|
|
codebase)
|
|
|
|
|
* MPM: Fix PyLint warnings, Fix error handling for TCA communication
|
|
|
|
|
errors, Fix printout of AD9371 version
|
|
|
|
|
* uhd_images_downloader: Create unique archive names for images archives
|
|
|
|
|
(now include git hashes in the filename)
|
|
|
|
|
* uhd_images_downloader: Fix SHA256 check
|
|
|
|
|
* utils: Add support for N3xx filesystem images to images downloader
|
|
|
|
|
* UHD: Minor logging fixes
|
|
|
|
|
* UHD: fix legacy compat to work with 2TX radio block
|
|
|
|
|
* X300: improve lvbitx bitstream md5 read time
|
|
|
|
|
* examples: Enhance benchmark_rate with more stats and timestamps for errors
|
|
|
|
|
* cmake: Correctly fail when an unavailable component is requested
|
|
|
|
|
* debian: Add UHDConfig.cmake to install list for libuhd-dev
|
|
|
|
|
|
2018-02-22 03:23:57 +00:00
|
|
|
## 003.011.000.000
|
|
|
|
|
* N310: Added driver
|
|
|
|
|
* UBX: Add support for CAL antenna for Rev E
|
|
|
|
|
* Added the module peripheral manager (MPM) with all subcomponents (N310
|
|
|
|
|
drivers, mpm_shell, RPC server, BIST, etc.)
|
|
|
|
|
* UHD: Added rpclib as a internally tracked dependency
|
|
|
|
|
* UHD: Reduced the usage of Boost
|
|
|
|
|
* UHD: Updated uhd_images_downloader: Now uses more elaborate manifest to
|
|
|
|
|
optimize downloads
|
|
|
|
|
* UHD: Introduced uhdlib internal include paths
|
|
|
|
|
* UHD: Add support for configuration files. USRP settings can now be set using
|
|
|
|
|
a uhd.conf file in addition to device args
|
|
|
|
|
* UHD: Add narrow and narrow_cast
|
|
|
|
|
* gr-usrptest: Various bugfixes
|
|
|
|
|
* Updated required Vivado version to 2017.4
|
|
|
|
|
* Updated all license headers to use SPDX identifiers and correctly identify
|
|
|
|
|
Ettus Research as part of National Instruments
|
|
|
|
|
* This release includes all bugfixes and features from previous releases, in
|
|
|
|
|
particular, the 3.10.* release cycle
|
|
|
|
|
|
|
|
|
|
## 003.010.003.000
|
|
|
|
|
* X300
|
|
|
|
|
** Fix max rate calculation for 1 GbE
|
|
|
|
|
** Fix for DAC synchronization errors (unexpected FIFO depth)
|
|
|
|
|
** Reduced CPU usage during TX
|
|
|
|
|
* N230
|
|
|
|
|
** Properly initialize request structure before discovery
|
|
|
|
|
* B200
|
|
|
|
|
** FX3 firmware performance opitimizations
|
|
|
|
|
** Fixed sequence error on second TX burst
|
|
|
|
|
* TwinRX
|
|
|
|
|
** Added ADF5356 synth and Rev C support
|
|
|
|
|
* UBX
|
|
|
|
|
** Add implementation of TDD xcvr_mode and for TX PA on in TDD mode (to reduce transient on older revs)
|
|
|
|
|
** Add support for UBX-TDD
|
|
|
|
|
* C API
|
|
|
|
|
** Fixed dboard EEPROM revision error handling
|
|
|
|
|
** Make uhd_rx_streamer_last_error use SAFE_C
|
|
|
|
|
** Better error handling in uhd_usrp_get_[t/r]x_stream
|
|
|
|
|
* RFNoC
|
|
|
|
|
** Fix ctrl_iface to pop sequence numbers only after success
|
|
|
|
|
** Fix sequence number error message in ctrl_iface
|
|
|
|
|
** FPGA fix for sr_read() failure to ack errors
|
|
|
|
|
** FPGA fix for repeated sequence number for RX packets with 1 sample
|
|
|
|
|
** FPGA fix for axi_serializer edge case
|
|
|
|
|
* Docs
|
|
|
|
|
** Fixed B200 power LED description
|
|
|
|
|
** Update README application links
|
|
|
|
|
* UHD
|
|
|
|
|
** Utilize poll() instead of select() for UDP transports where possible to avoid descirptor limits
|
|
|
|
|
** Fix build with Boost 1.66
|
|
|
|
|
** Add EEPROM info to dboard_base class so daughterboard code can access all EEPROM info
|
|
|
|
|
|
2017-07-18 22:25:22 +00:00
|
|
|
## 003.010.002.000
|
2017-07-07 17:17:43 +00:00
|
|
|
* multi_usrp: Fixed get_normalized_tx_gain.
|
2017-07-18 22:25:22 +00:00
|
|
|
* E300: Fix for streamer recreation issue. Reduced minimum timeout, fixed
|
|
|
|
|
potential race condition.
|
2017-07-07 17:17:43 +00:00
|
|
|
* X300: Fix for network discovery, will now return early when correct serial is
|
2017-07-18 22:25:22 +00:00
|
|
|
found. Fixed issue with DAC sync. All async messages now go through
|
|
|
|
|
single DMA channel on PCIe. Improved TX performance. Fixed page size
|
|
|
|
|
acquisition for PCIe. Fixed some FW communication errors. Improved flow
|
|
|
|
|
control. Removed MTU throttling. Legacy compat falls back to min spp
|
|
|
|
|
for mixed transport types.
|
2017-07-07 17:17:43 +00:00
|
|
|
* CBX: Fixed LO LPF behaviour in 1.5-2 GHz range.
|
2017-07-18 22:25:22 +00:00
|
|
|
* UBX: Fixed dtor SIGABRT issue. Better error handling for various dboard clock
|
|
|
|
|
rates.
|
|
|
|
|
* TwinRX: Added LO reimport feature.
|
|
|
|
|
* GPSDO: Improved detection. Improved query_gpsdo sensor.
|
|
|
|
|
* RFNoC: Fixed issue with DDC and DUC command tick rate.
|
|
|
|
|
* UHD: Fixed potential memory leak in tasks. Fixed get_normalized_tx_gain().
|
|
|
|
|
Fixed default socket buffer size to honor MTU.
|
|
|
|
|
* Examples: Added channel param to samps to/from file. sync_to_gps exits
|
|
|
|
|
instead of uncaught throw. latency_test improved output. Use
|
|
|
|
|
next_pps in test_clock_synch. Added TwinRX FHSS example.
|
|
|
|
|
* Utils: Modified behaviour of uhd_images_downloader so it won't delete dirs
|
|
|
|
|
when using -i
|
|
|
|
|
* Tools: Updates to CHDR dissector. Added set_time_source_out(). Fixed LO API.
|
2017-07-07 17:17:43 +00:00
|
|
|
* C API: Fixed some missing fields in USRP info.
|
2017-07-18 22:25:22 +00:00
|
|
|
* Docs: Many minor fixes. Fixed Doxygen warnings related to /* in files.
|
2017-07-07 17:17:43 +00:00
|
|
|
* CMake: Fixed GCC 4.4 compilation issue. Added ability to specify package
|
|
|
|
|
names.
|
2017-01-12 22:52:31 +00:00
|
|
|
|
2017-01-13 01:45:57 +00:00
|
|
|
## 003.010.001.001
|
2018-03-28 22:21:09 +00:00
|
|
|
* Docs: The protocol for Gen-3 devices is now consistently referred to as CHDR.
|
|
|
|
|
* X300: Fixed EEPROM corruption bug (happened when two processes would access
|
2017-01-12 22:52:31 +00:00
|
|
|
find routines on the same device at the same time). Improved initialization
|
|
|
|
|
time. CE clock is now 214 MHz. Fixed channel list generation. Find routines
|
|
|
|
|
now more lenient in case one devices fails (others can still be found then).
|
|
|
|
|
Improve PCIe behaviour. Fix timed commands for non-TwinRX dboards. Improve
|
|
|
|
|
AXI Interconnect (faster, improved build timing).
|
2018-03-28 22:21:09 +00:00
|
|
|
* N230: Use second_addr (like X300).
|
|
|
|
|
* C API: Added UHD_VERSION macro. Fixed online rate change.
|
|
|
|
|
* Utils: Minor fixes to uhd_images_downloader.
|
|
|
|
|
* Build/CMake: Fixed some Py3k build issues. Fixed many compiler warnings. Allow
|
2018-05-10 16:50:48 +00:00
|
|
|
to specify package names.
|
2018-03-28 22:21:09 +00:00
|
|
|
* RFNoC: Fixed sampling rate mismatch error. Noc-Shell uses a non-cascaded 2-clk
|
2017-01-12 22:52:31 +00:00
|
|
|
FIFO. Increase default FIFO sizes on DUC and DDC blocks.
|
2018-05-10 16:50:48 +00:00
|
|
|
* UBX: Force on RX driver to eliminate transient.
|
2018-03-28 22:21:09 +00:00
|
|
|
* Transport code: Fixed memory leak.
|
|
|
|
|
* FPGA repository: Merged usrp3_rfnoc and usrp3 directories again. Cleaned up
|
2017-01-12 22:52:31 +00:00
|
|
|
superfluous files. Clean separation between Gen-3 and other devices in usrp3.
|
|
|
|
|
|
2016-10-18 17:20:10 +00:00
|
|
|
## 003.010.001.000
|
2018-03-28 22:21:09 +00:00
|
|
|
* Fixed multiple compiler warnings
|
|
|
|
|
* Multiple documentation fixes
|
|
|
|
|
* X300: RX strobe lines are always in sync on device initialization. DB EEPROM
|
2016-10-18 17:20:10 +00:00
|
|
|
now properly written. ignore-cal-file no longer ignored. Fixed case where too
|
|
|
|
|
large recv_frame_size settings could break things. Reduced ZPU clock speed
|
|
|
|
|
(helps FPGA timing). Added area constraints for AXI interconnect. Improved
|
2016-10-28 00:45:50 +00:00
|
|
|
halfband scaling in rx_frontend. Improved PCIe streaming reliability
|
2018-03-28 22:21:09 +00:00
|
|
|
* B2xx: Clear sequence numbers in idle state.
|
|
|
|
|
* RFNoC: Nodes disconnect on destruction. Fixed setting of correct bits on
|
2016-10-18 17:20:10 +00:00
|
|
|
sr_error_policy. DDC does no longer clear timed commands on EOB. DUC fixed
|
|
|
|
|
timed CORDIC tuning. Enable Noc-Shell response FIFOs (fixes simultaneous
|
|
|
|
|
commands on multiple channels).
|
2018-03-28 22:21:09 +00:00
|
|
|
* UBX: Changed default performance parameters
|
|
|
|
|
* TwinRX: LEDs properly light up depending on channels. Fixed issue of multiple
|
2016-10-28 00:45:50 +00:00
|
|
|
(redundant) writes. Simplified API steps for phase synchronization
|
2018-03-28 22:21:09 +00:00
|
|
|
* XCVR: Query dboard clock instead of DAC clock. Helps in X3x0s.
|
|
|
|
|
* GPS: Fixed message for case when no GPS is present. Fixed multiple GPS-related
|
2016-10-18 17:20:10 +00:00
|
|
|
issues.
|
2018-03-28 22:21:09 +00:00
|
|
|
* Converters: Fixed floating point rounding error in tests.
|
|
|
|
|
* Utils: uhd_usrp_probe can now query vectors
|
|
|
|
|
* Fixed issue that prevented soft_regs working on 32-bit systems
|
|
|
|
|
* Tools: Merged dissectors into common directory.
|
|
|
|
|
* CMake: -Og is the default now for gcc-based Debug builds.
|
2016-10-18 17:20:10 +00:00
|
|
|
|
2016-08-12 00:02:54 +00:00
|
|
|
## 003.010.000.000
|
2018-03-28 22:21:09 +00:00
|
|
|
* Changed version string to quadruplets (Major.API.ABI.Patch)
|
|
|
|
|
* Minimum dependencies bumped for gcc, Boost, CMake, clang and Python.
|
|
|
|
|
* TwinRX: Added support. Includes LO API for multi_usrp.
|
|
|
|
|
* N230: Added support
|
|
|
|
|
* Added expert framework
|
|
|
|
|
* X300: Completely restructured to use RFNoC
|
|
|
|
|
* X300: FPGA builds include git hash, dual 10GigE receive is now supported
|
2016-08-12 00:02:54 +00:00
|
|
|
(allows 2x200 Msps receive over 2x10GigE connections), DMA FIFO (over DRAM)
|
|
|
|
|
now part of builds, added Aurora support
|
2018-03-28 22:21:09 +00:00
|
|
|
* WBX: Fixed bug that prevented LO locking with 50 MHz ref clock
|
|
|
|
|
* pkg-config: Added boost_system
|
|
|
|
|
* Utils: uhd_usrp_probe can query sensors, query_gpsdo_sensors: minor fixes,
|
2016-08-12 00:02:54 +00:00
|
|
|
and cleanup
|
2018-03-28 22:21:09 +00:00
|
|
|
* Examples: Bugfixes in tx_waveforms, benchmark_rate measures timeouts,
|
|
|
|
|
* USB subsystem: Cleanups and minor bugfixes
|
|
|
|
|
* Added devtest infrastructure
|
|
|
|
|
* Converters: Added s8 and s16 data types
|
|
|
|
|
* Added more aggressive optimization strategies for FPGA builds
|
|
|
|
|
* Xilinx IP tool upgrade scripts cleaned up
|
2016-08-12 00:02:54 +00:00
|
|
|
|
2016-08-22 21:40:03 +00:00
|
|
|
## 003.009.005
|
2018-03-28 22:21:09 +00:00
|
|
|
* B200: Update DSPs after changing tick rate
|
|
|
|
|
* X300: Added option to disable ADC self test, prevent DAC from
|
2016-08-22 21:40:03 +00:00
|
|
|
underrunning
|
2018-03-28 22:21:09 +00:00
|
|
|
* UBX: Fixed noise issues, reduced power consumption/heat, added codes for
|
2016-08-22 21:40:03 +00:00
|
|
|
upcoming board revisions, force RX LNAs on (reduces rx settling time)
|
2018-03-28 22:21:09 +00:00
|
|
|
* WBX: Fixed rev2 and rev3 boards on X300
|
|
|
|
|
* Utils/Examples: Cleaned up query_gpsdo_sensors, test_dboard_coercion,
|
|
|
|
|
* Manual: Minor fixes and updates
|
|
|
|
|
* CMake: Fix lib64 detection, better platform detection, Doxygen may use shorter
|
2016-08-22 21:40:03 +00:00
|
|
|
filenames
|
2018-03-28 22:21:09 +00:00
|
|
|
* Octoclock: GPSDO-related fixes, sequence number consistency fixes, UART
|
2016-08-22 21:40:03 +00:00
|
|
|
fixes (off-by-one errors). uhd_usrp_probe will pick up an OC now,
|
|
|
|
|
added Wireshark dissector for OC packets
|
|
|
|
|
|
2016-04-21 22:32:29 +00:00
|
|
|
## 003.009.004
|
2018-03-28 22:21:09 +00:00
|
|
|
* GPIO control: Fix address mismatch for RX and full duplex.
|
2016-04-21 22:32:29 +00:00
|
|
|
This fixes full-duplex mode for most devices.
|
2018-03-28 22:21:09 +00:00
|
|
|
* B200: Fixed auto rate selection (can now select 61.44 Msps)
|
|
|
|
|
* UBX: Fix member declaration order which could cause
|
2016-04-21 22:32:29 +00:00
|
|
|
segfaults for debug builds
|
2018-03-28 22:21:09 +00:00
|
|
|
* Manual/Docs: Numerous fixes, use dot for graphs in manual
|
|
|
|
|
* Utils: multiple fixes for query_gpsdo_sensors, fixed floating point
|
2016-04-21 22:32:29 +00:00
|
|
|
comparison
|
2018-03-28 22:21:09 +00:00
|
|
|
* Windows: Include registry file in installation
|
|
|
|
|
* Converters: Improve NEON converters
|
2016-04-21 22:32:29 +00:00
|
|
|
|
2016-03-14 21:10:12 +00:00
|
|
|
## 003.009.003
|
|
|
|
|
* UBX: Fixed a phase synchronization issue on the sub-1GHz band
|
|
|
|
|
* USB: Fixed transport issue that crashed when multiple USB devices were
|
|
|
|
|
connected on a Windows machine, more graceful handling of USB disconnects,,
|
|
|
|
|
provided .cdf file for installing on Windows
|
|
|
|
|
* B200: Fixed memory growth/increasing tune times issue
|
2016-03-21 18:46:58 +00:00
|
|
|
* E300: Fixed memory leak with udev, fixed issue with autoboot value, fixes
|
|
|
|
|
to button behaviour
|
2016-03-14 21:10:12 +00:00
|
|
|
* usrp2, usrp3: Fixed IQ imbalance and DC bias in DDC chain
|
|
|
|
|
* CMake: Windows registry fixes
|
|
|
|
|
* Fixed several compiler warnings and minor bugs
|
2016-03-21 18:46:58 +00:00
|
|
|
* Examples: Updated benchmark_rate for improved thread safety
|
2016-03-14 21:10:12 +00:00
|
|
|
|
2015-12-22 19:30:19 +00:00
|
|
|
## 003.009.002
|
|
|
|
|
* E310: Added support for Speedgrade 3
|
|
|
|
|
* B205mini: Added support
|
|
|
|
|
* E310: Fixed reference counting bug
|
|
|
|
|
* B210: Fixed external clock reference bug for devices using ADF4002 PLLs
|
|
|
|
|
* B210: Fixed codec loopback test
|
|
|
|
|
* OctoClock: Fixed firmware burning on Windows
|
|
|
|
|
* B2XX, E3XX, X3XX: Easier time-syncing features. Fixes bug where B210s would
|
|
|
|
|
only run after issuing set_time_unknown_pps().
|
|
|
|
|
* X3XX: Fixed bug for IQ imbalance correction
|
|
|
|
|
* E310: DRAM testbenching
|
|
|
|
|
* Docs/Manual: Many updates and fixes
|
|
|
|
|
|
2015-09-11 19:12:54 +00:00
|
|
|
## 003.009.001
|
|
|
|
|
* B200mini: Updated udev rules, removed DCM
|
|
|
|
|
* B200: Better USB error messages
|
|
|
|
|
* Cores: Fixed CORDIC scaling issue on all devices that use
|
|
|
|
|
dsp_core_3000
|
|
|
|
|
* X300: Fixed GPIO issue
|
|
|
|
|
* Examples: Added PPS source option
|
|
|
|
|
* Docs: Multiple manual updates
|
|
|
|
|
|
2015-08-18 00:55:22 +00:00
|
|
|
## 003.009.000
|
|
|
|
|
* X300: Updated DAC ctrl, FPGA toolchain is now entirely Vivado,
|
|
|
|
|
improved master clock controls, added ADC self-cal capability,
|
|
|
|
|
prepared for revisions 7 and 8, fixed flow control issue which
|
|
|
|
|
could cause device to hang when receiving too many overruns
|
|
|
|
|
* B2XX: Auto clock rate setting, added PID/VID pairs to support
|
|
|
|
|
all B2XX- and derivatives, added temperature sensor, improved
|
|
|
|
|
DC offset and IQ imbalance correction, added AGC support,
|
|
|
|
|
support for FPGPIO connector on Rev6+ boards, full clock range support,
|
|
|
|
|
updated FX3 firmware (side-channel logging capabilities, updated
|
|
|
|
|
tx voltage swing, better configurability), default tick rate now
|
|
|
|
|
16 MHz, added B200mini support
|
|
|
|
|
* E3XX: Added temperature sensor, FPGA toolchain is now entirely Vivado,
|
|
|
|
|
improved DC offset and IQ imbalance correction, added AGC support,
|
|
|
|
|
improved FPGA capture interface robustness for RFIC, make frame
|
|
|
|
|
sizes configurable, replaced GPS control code with gpsd interfacing
|
|
|
|
|
capabilities
|
|
|
|
|
* Octoclock: Fixed bootloader + ethernet capabilities
|
|
|
|
|
* Compilers: Supported MSVC versions are now 2012, 2013, 2015
|
|
|
|
|
(dropped 2010 support), added MinGW capabilities
|
|
|
|
|
* Documentation: Many minor fixes and updates, merged all the
|
|
|
|
|
info from code.ettus.com
|
|
|
|
|
* UHD: Added sid_t, CHDR-specific transports now get their own
|
|
|
|
|
(un)packer codes, fixed a lot of compiler warnings, added
|
|
|
|
|
filter API (currently available for AD9361 frontend), added
|
|
|
|
|
soft-register API, replaced Cheetah with Mako, full Py3k
|
|
|
|
|
compliance, updated images downloader tool (now is one tool
|
|
|
|
|
for all devices), CMake minimum version is now 2.8, refactored
|
|
|
|
|
general AD9361 peripheral management, refactored most core
|
|
|
|
|
control management, added usb_error type (used by B2xx devices),
|
|
|
|
|
better exception handling at runtime, added C wrapper API,
|
|
|
|
|
new dependency: python-requests
|
|
|
|
|
* C API: Added to UHD (wraps C++ calls in C)
|
|
|
|
|
* multi_usrp: Added normalized gain setters/getters, IQ imbalance
|
|
|
|
|
+ DC offset correction API, filter API
|
|
|
|
|
* Converters: Converter symbols now exported, better logging,
|
|
|
|
|
removed ORC dependency, added u8 converters
|
|
|
|
|
* Examples: Whitespace- and other cleanup, multi-channel fixes for
|
|
|
|
|
some examples
|
|
|
|
|
* Utils: Read more property tree types from the command line
|
|
|
|
|
* Tools: kitchen sink updated, added mega_fft
|
|
|
|
|
|
2015-07-14 19:06:04 +00:00
|
|
|
## 003.008.005
|
|
|
|
|
* E3xx: Added support for battery-based E3xx device (E312),
|
|
|
|
|
get_freq() for network mode, fixed GPS time initialization bug
|
|
|
|
|
* AD9361-based devices: Fixed frequency readback bug
|
|
|
|
|
* B200: Fixed DCM issues, better loopback failure handling,
|
|
|
|
|
fix erroneous warning for custom clock rates
|
|
|
|
|
* X3x0: Better warnings for clock reate / ref freq
|
|
|
|
|
* multi_usrp: Added define for GPIO capabilities (enables
|
|
|
|
|
exposure in GNU Radio)
|
|
|
|
|
* UHD: sc16->sc16 SSE converter
|
|
|
|
|
* Manual: Multiple minor updates, FPGA manual improvements,
|
|
|
|
|
* Build System: Fixed builds on some Windows platforms, removed
|
|
|
|
|
stray prints
|
|
|
|
|
|
2015-05-06 22:09:07 +00:00
|
|
|
## 003.008.004
|
|
|
|
|
* B200: Fixed EEPROM writing bug, updated images for B200 Rev5/6
|
|
|
|
|
* E300: GPS antenna power defaults to staying on, GPS time used as
|
|
|
|
|
default if available
|
|
|
|
|
* UBX: PDF frequency fix on X300
|
|
|
|
|
* USRP2: Bugfix that allows latest UHD to work with USRP2
|
|
|
|
|
* Documentation: Many fixes for E300 section, added FPGA manual
|
|
|
|
|
|
2015-04-14 15:49:43 +00:00
|
|
|
## 003.008.003
|
|
|
|
|
* UBX: Fixed phase synchronization issues
|
|
|
|
|
(Related changes: Change X300 daughterboard frequency, increase
|
|
|
|
|
N210 FIFO depth)
|
|
|
|
|
* Fixed many compiler warnings
|
|
|
|
|
* B200: Fixed timing issues, fixed tick rate issue, stabilized
|
|
|
|
|
operations at high clock rates
|
|
|
|
|
* X300: Improved phase alignment across devices
|
|
|
|
|
* CMake: Build fixes
|
|
|
|
|
* E300: Flow control fix
|
|
|
|
|
|
2015-01-28 22:48:16 +00:00
|
|
|
## 003.008.002
|
|
|
|
|
* CMake: Introducing named versions for dev branches, enable static libs,
|
|
|
|
|
* E300: Docs updates, compat number bump, VCTCXO updates,
|
|
|
|
|
more status bits for ref locking, fixed serial number length fix,
|
|
|
|
|
RSSI Sensor
|
|
|
|
|
* B200: RSSI sensor
|
|
|
|
|
* AD9361: Better handling of different interpolation rates in FIR,
|
2015-02-16 18:19:54 +00:00
|
|
|
fix for gain value truncation, removed gain value offset
|
2015-01-28 22:48:16 +00:00
|
|
|
* UBX: Added drivers
|
|
|
|
|
* Manual/Docs: Numerous updates, minimum compiler versions now specified,
|
|
|
|
|
* Converters: Multiple fixes for sc12
|
|
|
|
|
* Examples: Fixes to txrx_loopback_to_file
|
2015-02-16 18:19:54 +00:00
|
|
|
* Path handling vastly improved, made more consistent
|
2015-01-28 22:48:16 +00:00
|
|
|
* Minor UHD fixes
|
|
|
|
|
|
2014-12-16 09:38:12 +00:00
|
|
|
## 003.008.001
|
|
|
|
|
* B2x0: Fixed PLL settings, Fixed external ref selection, serialized
|
|
|
|
|
streamer setup (thread-safety)
|
|
|
|
|
* X3x0: Fixed flow control issue, improved DAC ctrl + init logic,
|
|
|
|
|
Fixed I/Q alignment issue
|
|
|
|
|
* Generation-3 devices: Fixed LED registers
|
|
|
|
|
* UHD: Improved tuning logic for manual tunes
|
|
|
|
|
* Tools: Multiple kitchen sink fixes, coloured output
|
|
|
|
|
* Examples: Multiple bugfixes (multi-channel ops)
|
|
|
|
|
* Docs/Manual: Multiple fixes, E310 panel images
|
|
|
|
|
|
2014-10-13 10:32:29 +00:00
|
|
|
## 003.008.000
|
2014-10-14 09:30:47 +00:00
|
|
|
* Added E310 support
|
2014-10-13 10:32:29 +00:00
|
|
|
* B200/B210: Moved AD9361 controls from firmware to host
|
|
|
|
|
* Added several tools: ZPU dissector, improved CHDR dissector,
|
|
|
|
|
kitchen sink, B200/B210 USB debugging utility, latency
|
|
|
|
|
measurement tool.
|
|
|
|
|
* Reorganized firmware/ directory structure. Refactored some
|
|
|
|
|
firmware.
|
|
|
|
|
* Removed FPGA sources, is now in own repository (submoduled).
|
|
|
|
|
* Cleaned up command line arguments for some tools
|
|
|
|
|
* Added math namespace, plus a unified float comparison infrastructure
|
|
|
|
|
* Fixed tuning-related bugs
|
|
|
|
|
* Moved manual over to Doxygen, also several manual bug fixes and
|
|
|
|
|
amendments
|
|
|
|
|
* Added many missing virtual destructors (less build warnings)
|
|
|
|
|
* Added support for NI-RIO 14.0
|
2014-10-27 20:14:48 +00:00
|
|
|
* X300 fixes: Not found over PCIe with no eth interfaces
|
2014-10-13 10:32:29 +00:00
|
|
|
* CMake improvements: Now comes with own UHDConfig.cmake and example
|
|
|
|
|
to build standalone UHD apps, build fixes on Apple, interoperability
|
|
|
|
|
with GNU Radio
|
|
|
|
|
* OctoClock fixes and improvements: Ethernet initialization, external
|
|
|
|
|
ref detection, stability fixes, host driver (UHD can now talk to
|
|
|
|
|
OctoClock)
|
|
|
|
|
* Examples: Improved GPIO example, rx_samples_to_file
|
2014-10-27 20:14:48 +00:00
|
|
|
* Bumped minimum Boost version to 1.46
|
2014-10-13 10:32:29 +00:00
|
|
|
|
2014-09-25 02:06:14 +00:00
|
|
|
## 003.007.003
|
|
|
|
|
* Fixed examples
|
|
|
|
|
* Removed compiler warnings
|
|
|
|
|
* Fixed CBX LO settings (FRAC truncation)
|
|
|
|
|
* Fixed build issues for out-of-tree tools for some distros
|
|
|
|
|
* Fixed some logging strings (SBX, GPSDO)
|
2014-10-02 21:26:42 +00:00
|
|
|
* Improved logging (speedups, removed unnecessary cycles)
|
2014-09-25 02:06:14 +00:00
|
|
|
* Added output sync for DAC reference clocks on X300
|
2014-10-02 21:26:42 +00:00
|
|
|
* Multiple FPGA improvements, as well as upgrade of build env
|
|
|
|
|
* Added support for B200 vs B210 discovery
|
2014-09-25 02:06:14 +00:00
|
|
|
|
2014-07-21 21:45:11 +00:00
|
|
|
## 003.007.002
|
2014-08-18 21:36:02 +00:00
|
|
|
* Fixed X300 phase alignment issues
|
|
|
|
|
* Fixed CMake 2.6 incompatibility issues
|
|
|
|
|
* EEPROM burner improvements
|
2014-07-21 21:45:11 +00:00
|
|
|
* Properly flushing PCIe chain on device to prevent stale data.
|
|
|
|
|
* Adjusted bus clock rate in FPGA to improve timing.
|
|
|
|
|
* Fixed issue where FPGA would fail to load FPGA image over PCIe.
|
|
|
|
|
* Fixed incompatibility issue with USRP2 FPGA burner utility.
|
|
|
|
|
* Fixed issue where ZPU would report empty NMEA strings from GPSDO.
|
|
|
|
|
* Updated some functions to no longer use deprecated Boost calls.
|
|
|
|
|
* Fixed issue where libusb would declare 'connection refused'.
|
|
|
|
|
* Fixed Windows library package naming.
|
|
|
|
|
* Updated documentation.
|
|
|
|
|
* Fixed reversed TX / RX colors in X300 LED indicators.
|
|
|
|
|
* DBSRX2 now works properly with X300 / X310.
|
|
|
|
|
* Updated include files to build on older distros of Linux.
|
|
|
|
|
* Fixed issue with 'item32' type converter from GNU Radio.
|
|
|
|
|
* Fixed issue where channels on B210 would occasionally not be phase-aligned.
|
|
|
|
|
* Fixed problem causing channels on B210 to swap between runs.
|
|
|
|
|
* Fixed issue in N-Series devices causing scaling error @ 50 MSps.
|
|
|
|
|
* The B200 / B210 now generates an internal PPS if none is provided.
|
|
|
|
|
* Improved performance on PCIe for X300.
|
|
|
|
|
* B200 / B210 properly reports clock rate (issue with float comparison).
|
2014-07-22 22:36:57 +00:00
|
|
|
* Fixed issue with filter selection in B200 that caused loss of RX power.
|
|
|
|
|
* Removed ref lock check from X300 where it wasn't necessary.
|
2014-04-21 21:20:53 +00:00
|
|
|
|
2014-07-21 21:45:11 +00:00
|
|
|
## 003.007.001
|
2014-04-21 21:20:53 +00:00
|
|
|
* Fixed issue with TVRX2 divider calculation.
|
|
|
|
|
* Fixed issue using calibration utilities on B-Side daughterboard in an X3xx.
|
|
|
|
|
* Replaced unsafe `sscanf` call in utilities.
|
|
|
|
|
* Properly initializing N-Series clock, fixing short transient on device boot-up.
|
|
|
|
|
* Improved `--help` output for a number of utilities & examples.
|
|
|
|
|
* Improved READMEs for directories.
|
|
|
|
|
* Fixed X3xx documentation with some clarifications.
|
|
|
|
|
* UHD will now tell you if you have requested a sample rate higher than the transport can deliver.
|
|
|
|
|
* Removed work-around necessary in RIO kernel module for zero-copy in PCIe for X3xx devices.
|
|
|
|
|
* Fixed issue where X3xx devices would lock-up when on networks with lots of traffic.
|
|
|
|
|
* The B2xx FX3 and AD9361 source code is now in UHD.
|
|
|
|
|
* Numerous B2xx stability improvements.
|
|
|
|
|
* Fixed includes for older OSes (e.g., Fedora 14).
|
|
|
|
|
* Fixed includes for older versions of Boost.
|
|
|
|
|
* Fixed PPS detection in X3xx with multiple time sources.
|
|
|
|
|
* Fixed overflow reporting for X3xx utilities.
|
|
|
|
|
* Fixed MTU / frame size detection for X3xx devices.
|
|
|
|
|
* Fixed B2xx filter chain causing wrong sample rate in some circumstances.
|
|
|
|
|
|
2014-02-04 19:04:07 +00:00
|
|
|
## 003.007.000
|
|
|
|
|
* Introduced USRP X300 and X310 support!
|
|
|
|
|
* Releasing a CHDR Dissector for Wireshark analysis
|
|
|
|
|
* Improved USRP B200 and B210 stability
|
|
|
|
|
* Introducing Integer-N tuning for WBX, SBX, CBX daughterboards
|
|
|
|
|
* Introducing support for 120 MHz versions of WBX, SBX, CBX
|
|
|
|
|
* Lots of new documentation
|
|
|
|
|
* New GPIO example for USRP X300
|
|
|
|
|
* Fixed threading bug in USRP B2xx code causing GQRX issue
|
|
|
|
|
* General UHD bug fixes & improvements
|
|
|
|
|
|
2014-01-15 02:02:31 +00:00
|
|
|
## 003.006.002
|
|
|
|
|
* Fixed bug in timed commands example.
|
|
|
|
|
* Improved compatibility for older versions of Boost.
|
|
|
|
|
* Fixed segmentation fault issue in converter code.
|
|
|
|
|
* Fixed binary-stripping for ARM builds.
|
|
|
|
|
* B2xx: Further improvements to code and images.
|
|
|
|
|
* Documentation links now installed to Start Menu in Windows.
|
|
|
|
|
* B2xx: More robust error checking in host code.
|
|
|
|
|
* B2xx: Improved error reporting.
|
|
|
|
|
* B2xx: Increase FPGA loading speed on USB 3
|
|
|
|
|
* B2xx: Re-programming FPGA without cycle now supported.
|
|
|
|
|
* B2xx: Larger RX SPP ceiling to support 16K transfers with larger RX FIFO in new FPGA image
|
|
|
|
|
* Updated internal READMEs and documentation.
|
|
|
|
|
* N-Series: netburner now accepts relative paths with '~'
|
|
|
|
|
* Completely re-written UHD Images Downloader, with numerous bug fixes and new features.
|
|
|
|
|
|
|
|
|
|
## 003.006.001
|
|
|
|
|
* B2xx: Fixed critical bug in 003.006.000 regarding USRP B2xx operation
|
|
|
|
|
|
|
|
|
|
## 003.006.000
|
|
|
|
|
* Many small fixes for bugs revealed by static analysis.
|
|
|
|
|
* Introduced support for the USRP B200 / B210
|
|
|
|
|
|
2013-11-27 19:53:38 +00:00
|
|
|
## 003.005.003
|
|
|
|
|
* E110:
|
|
|
|
|
** Fix FPGA Makefile build typo
|
|
|
|
|
* UHD:
|
|
|
|
|
** Fixed timespec irrational rate rounding
|
|
|
|
|
** Multichan streamer CPU utilization
|
|
|
|
|
|
|
|
|
|
## 003.005.002
|
|
|
|
|
* B100:
|
|
|
|
|
** Fix get send buffer timeout
|
|
|
|
|
* E1x0:
|
|
|
|
|
** Changes to bus timings for S issue
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Restore broken EEPROM writing
|
|
|
|
|
|
|
|
|
|
## 003.005.001
|
|
|
|
|
* Misc:
|
|
|
|
|
** Fixes to images downloader
|
|
|
|
|
** Fixes to C++ net burner
|
|
|
|
|
** Added sleep(1) to query_gpsdo_sensors
|
|
|
|
|
* OSX:
|
|
|
|
|
** Fix for socket send code newer OS versions
|
|
|
|
|
* Changes from 3.4.5
|
|
|
|
|
|
|
|
|
|
## 003.005.000
|
|
|
|
|
* B100:
|
|
|
|
|
** Added timed commands feature
|
|
|
|
|
** Incremented FPGA compat number to 11.1
|
|
|
|
|
** Incremented firmware compat number to 3
|
|
|
|
|
* E1x0:
|
|
|
|
|
** Added timed commands feature
|
|
|
|
|
** Incremented FPGA compat number to 11.1
|
|
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Alternative stream destination on TX
|
|
|
|
|
** Incremented FPGA compat number to 10
|
|
|
|
|
* N2x0:
|
|
|
|
|
** Implemented timed-commands feature
|
|
|
|
|
** Implemented fast-commands feature
|
|
|
|
|
* SBX/WBX
|
|
|
|
|
** Tune with phase sync using timed-commands
|
|
|
|
|
* RFX series
|
|
|
|
|
** Added calibration utilities support
|
|
|
|
|
* General:
|
|
|
|
|
** SSE2 conversions for sc8 RX samples
|
|
|
|
|
** Added multi-threading to packet converters
|
|
|
|
|
** Added automatic images fetcher application
|
|
|
|
|
|
|
|
|
|
## 003.004.005
|
|
|
|
|
* XCVR2450:
|
|
|
|
|
** Added XCVR2450 rev2 support
|
|
|
|
|
* WBX:
|
|
|
|
|
** Added WBX rev4 support
|
|
|
|
|
* Misc:
|
|
|
|
|
** Fix to rx_samples_to_udp byte count
|
|
|
|
|
** stream command enums easy on SWIG
|
|
|
|
|
|
|
|
|
|
## 003.004.004
|
|
|
|
|
* Gen2
|
|
|
|
|
** Fix RX and TX DSP scalar adjustments
|
|
|
|
|
* B100/E1x0
|
|
|
|
|
** Fixed RX ADC IQ inversion swap
|
|
|
|
|
** Incremented FPGA compat number to 9.4
|
|
|
|
|
|
|
|
|
|
## 003.004.003
|
|
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Net burner parser fix (windows)
|
|
|
|
|
* XCVR2450:
|
|
|
|
|
** Fix to disable automatic LO offset on TX
|
|
|
|
|
* N2x0:
|
|
|
|
|
** Deal with misc exceptions in net burner
|
|
|
|
|
* E1x0:
|
|
|
|
|
** Changes to add reliability to bus state machine
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Shutoff the DAC on transmit EOB flags
|
|
|
|
|
** Revert 1st nyquist zone DAC calculation
|
|
|
|
|
|
|
|
|
|
## 003.004.002
|
|
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Card and net burner language fixes
|
|
|
|
|
** Net burner python v3 code fix
|
|
|
|
|
** Net burner IPv6 interface fix
|
|
|
|
|
* E1x0:
|
|
|
|
|
** Fix for FPGA timing issue with GPMC input
|
|
|
|
|
** Incremented FPGA compat number to 9.2
|
|
|
|
|
* B100:
|
|
|
|
|
** Fix USB wrapper/buffer release race condition
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Fix DAC calculation for tune out of 1st nyquist zone
|
|
|
|
|
* General:
|
|
|
|
|
** Fix for recv packet handler time error check
|
|
|
|
|
** SIMD conversion routines priority over table look-up
|
|
|
|
|
** Fix undefined GCC float conversion behaviour for sc8
|
|
|
|
|
|
|
|
|
|
## 003.004.001
|
|
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Filter out invalid broadcast replies
|
|
|
|
|
** Incremented FPGA compat number to 9.1
|
|
|
|
|
* E1x0:
|
|
|
|
|
** Incremented FPGA compat number to 9.1
|
|
|
|
|
* B100:
|
|
|
|
|
** FPGA fixes for USB slave FIFO interface
|
|
|
|
|
** Incremented FPGA compat number to 9.3
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Stop thread in deconstructor for race condition
|
|
|
|
|
** Fixed DBSRX + USRP1 i2c lockup condition
|
|
|
|
|
* Gen2:
|
|
|
|
|
** Fix for unintentional clear in deprecated recv() call
|
|
|
|
|
** Fix RX DC offset call to handle negative values
|
|
|
|
|
* FreeBSD:
|
|
|
|
|
** Fixed network relay example compilation
|
|
|
|
|
|
|
|
|
|
## 003.004.000
|
|
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** 50 Msps RX/TX with sc8 mode over the wire
|
|
|
|
|
* B100:
|
|
|
|
|
** 16 Msps RX/TX with sc8 mode over the wire
|
|
|
|
|
* SBX/WBX:
|
|
|
|
|
** Added self-calibration utilities
|
|
|
|
|
* Gen2:
|
|
|
|
|
** Control RX/TX DC offset correction via API
|
|
|
|
|
** Control RX/TX IQ balance correction via API
|
|
|
|
|
** Incremented FPGA compat number to 9
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Support 16Msps RX with sc8 mode over the wire
|
|
|
|
|
** Control RX DC offset correction via API
|
|
|
|
|
* Misc:
|
|
|
|
|
** Multiple streamers/heterogeneous rates
|
|
|
|
|
** Alternative host and wire data types
|
|
|
|
|
** Added API calls for DC offset correction
|
|
|
|
|
** Added API calls for IQ balance correction
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.003.002
|
2013-11-27 19:53:38 +00:00
|
|
|
* N2x0:
|
|
|
|
|
** Fixed TX daughterboard clocking mode
|
|
|
|
|
* B100:
|
|
|
|
|
** Tweaks for ordering of FPGA resets
|
|
|
|
|
* Misc:
|
|
|
|
|
** Device adder can parse empty values
|
|
|
|
|
** Updated syntax in udev rules file
|
|
|
|
|
** Corrections to images documentation
|
|
|
|
|
** Performance tweak for tx_waveforms example
|
|
|
|
|
** Handle EINTR on select() w/ udp transport
|
|
|
|
|
** Minor fixes for compiling on FreeBSD
|
|
|
|
|
|
|
|
|
|
## Release 003.003.001
|
|
|
|
|
* B100/E1x0:
|
|
|
|
|
** Fixed VCO bounds checking on flexible clocking
|
|
|
|
|
* B100:
|
|
|
|
|
** Fixed discovery throwing when device claimed
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.003.000
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Incremented firmware image compat number to 11.0
|
|
|
|
|
** Re-implement internal GPSDO UART control
|
|
|
|
|
* E1x0:
|
|
|
|
|
** New GPMC/FPGA bus implementation
|
|
|
|
|
** Incremented FPGA compat number to 6
|
|
|
|
|
** Incremented module compat number to 3
|
|
|
|
|
** Added support for E110
|
|
|
|
|
** Added support for E100r4
|
|
|
|
|
* B100:
|
|
|
|
|
** Added support for B100
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Re-implement LibUSB data transport
|
|
|
|
|
* Misc:
|
|
|
|
|
** Normalise time_spec for negative fractional seconds
|
|
|
|
|
* Gen2:
|
|
|
|
|
** Fix DSP rate selection clipping for very low rates
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.002.004
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Resize all socket buffers (multi-channel)
|
|
|
|
|
* N2x0:
|
|
|
|
|
** Gracefully handle missing GPSDO
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Fix bug with order of deconstructors
|
|
|
|
|
** Fix zero length send padding on commit
|
|
|
|
|
* XCVR2450:
|
|
|
|
|
** Fix LO locking at marginal frequencies
|
|
|
|
|
* WBX:
|
|
|
|
|
** Fix TX gain readback value on v3 board
|
|
|
|
|
* Gen2:
|
|
|
|
|
** Fix bounds checking on stream num samps
|
|
|
|
|
** Fix error using PPS_NEG in clock config
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.002.003
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Fix uninitialized variable for multi-board case
|
|
|
|
|
** Fix deconstructor throwing on device disconnect
|
|
|
|
|
** Incremented FPGA image compat number to 7.3
|
|
|
|
|
* TVRX:
|
|
|
|
|
** Populated sensors property (fixed error in init)
|
|
|
|
|
* FPGA (gen2):
|
|
|
|
|
** Adjust RX DC offset correction time constant
|
|
|
|
|
** Restore calibration path in RX/TX frontend
|
|
|
|
|
* Misc:
|
|
|
|
|
** MB EEPROM burner workaround for compiler bugs
|
|
|
|
|
** Clip the reported tune range to the dboard bandwidth
|
|
|
|
|
** Preserve bands when calculating overall tune range
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.002.002
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N2x0:
|
|
|
|
|
** Always resize socket send buffer to SRAM size
|
|
|
|
|
** Incremented FPGA image compat number to 7.2
|
|
|
|
|
** Incremented firmware image compat number to 10.4
|
|
|
|
|
* N2x0:
|
2014-02-04 19:04:07 +00:00
|
|
|
** GPSDO control tweak for some devices
|
2013-11-27 19:53:38 +00:00
|
|
|
** Fix for erasure logic in rare bricking cases
|
|
|
|
|
* E100:
|
|
|
|
|
** Fix RX run state for GPIOs controlled by ATR
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Fix for multi-channel streaming
|
|
|
|
|
** Fix to support 0 RX or 0 TX DSPs
|
|
|
|
|
* SBX:
|
|
|
|
|
** Corrected lower limit on frequency range
|
|
|
|
|
* FPGA (gen2):
|
|
|
|
|
** Reset CIC decimator on start of burst
|
|
|
|
|
* Misc:
|
|
|
|
|
** Fix send to return zero on empty packets
|
|
|
|
|
** Perform version check on liborc
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.002.001
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N-Series:
|
|
|
|
|
** Firmware fix to shutoff streaming when socket unreachable
|
|
|
|
|
** Incremented firmware image compat number to 10.3
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.002.000
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N-Series:
|
|
|
|
|
** Incremented FPGA image compat number to 7.1
|
|
|
|
|
** Incremented firmware image compat number to 10.2
|
|
|
|
|
** Removed mimo_mode device addr argument
|
|
|
|
|
** Support for rev4 N2XX motherboards
|
|
|
|
|
* USRP-E100:
|
|
|
|
|
** Removed the need for clock recovery
|
|
|
|
|
** Incremented FPGA image compat number to 5
|
|
|
|
|
** Incremented kernel module compat number to 2
|
|
|
|
|
** Added support for dual receive DSPs
|
|
|
|
|
** Async messages independent from RX path
|
|
|
|
|
* WBX:
|
|
|
|
|
** Support for rev3 daughterboards
|
|
|
|
|
* DBSRX2:
|
|
|
|
|
** Rounding fix for LO tuning error
|
|
|
|
|
* Packet handler:
|
|
|
|
|
** Overall performance improvements
|
|
|
|
|
** Timestamps for packet fragments
|
|
|
|
|
** Overflow message on dropped packets
|
|
|
|
|
* Conversion:
|
|
|
|
|
** Optional liborc conversion support
|
|
|
|
|
** SSE2 conversion alignment performance
|
|
|
|
|
** SSE2 conversion for complex doubles
|
|
|
|
|
* Windows:
|
|
|
|
|
** Performance improvements for UDP send
|
|
|
|
|
* Misc:
|
|
|
|
|
** Code reorganization with property tree
|
|
|
|
|
** Calibration support in gen2 FPGAs
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.001.002
|
2013-11-27 19:53:38 +00:00
|
|
|
* N-Series:
|
|
|
|
|
** Fix UART communication for GPSDO
|
|
|
|
|
* XCVR2450:
|
|
|
|
|
** Fix for descontructor throwing on hardware disconnect
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.001.001
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP1:
|
|
|
|
|
** Fixed lock up in logging facility under MSVC
|
|
|
|
|
* USRP2/N-Series:
|
|
|
|
|
** Handle exceptions thrown in device locker loop
|
|
|
|
|
** Connected internal GPSDO PPS signal in FPGA
|
|
|
|
|
* WBX
|
|
|
|
|
** Keep mixers on between bursts to maintain phase offsets
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.001.000
|
2013-11-27 19:53:38 +00:00
|
|
|
* USRP2/N-Series:
|
|
|
|
|
** Incremented FPGA compat number to 6
|
|
|
|
|
** Incremented firmware compat number to 10
|
|
|
|
|
** Created all-in-one bootloader for N-series
|
|
|
|
|
** Lock open devices per process
|
|
|
|
|
** USRP N-Series internal GPSDO Support
|
|
|
|
|
** Discovery works with out-of-date images
|
|
|
|
|
** Net and card burner: python 3.0 support
|
|
|
|
|
** Net burner: tkinter + windows thread fix
|
|
|
|
|
** Card burner: device selection validation
|
|
|
|
|
* USRP-E100:
|
|
|
|
|
** Incremented FPGA compat number to 4
|
|
|
|
|
** FPGA VRT packet framer correct length
|
|
|
|
|
** Fix auxiliary ADC read back for AD9862
|
|
|
|
|
** Sync TX and RX daughterbord clocks
|
|
|
|
|
** Fix daughterboard clock rates after re-clock event
|
|
|
|
|
* USRP1:
|
|
|
|
|
** Fix TX under remainder conditions
|
|
|
|
|
** Fixed RX multi-channel mapping
|
|
|
|
|
* Daughterboards:
|
|
|
|
|
** Added support for TVRX2 daughterboard
|
|
|
|
|
** Added support for SBX daughterboard
|
|
|
|
|
** Added support for WBX granddaughterboards
|
|
|
|
|
** Application notes for sensors and IF
|
|
|
|
|
* Windows:
|
|
|
|
|
** MinGW and Cygwin support (thanks Don)
|
|
|
|
|
** Fix calling convention on libusb callbacks
|
|
|
|
|
* Misc:
|
|
|
|
|
** Added logging and messaging facilities
|
|
|
|
|
** Deprecated API in utils/warning.hpp
|
|
|
|
|
** Fixed race condition in device discovery/factory
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.000.001
|
2013-11-27 19:53:38 +00:00
|
|
|
* RFX400: fix for transmit capability
|
|
|
|
|
* USRP1: fix for axillary ADC read
|
|
|
|
|
* Windows: statically link libusb
|
|
|
|
|
* Windows: install dll into runtime path
|
|
|
|
|
* Linux: automatically set LIB_SUFFIX on rh-64 systems
|
|
|
|
|
* USRP-E100: fix - set FPGA tick rate on re-clock event
|
|
|
|
|
* build: various work on build system
|
|
|
|
|
* build: include FPGA and firmware images in installers
|
|
|
|
|
|
2018-05-16 21:34:36 +00:00
|
|
|
## 003.000.000
|
2013-11-27 19:53:38 +00:00
|
|
|
Initial (formal) release, no changes to mention.
|
