xous-core/bao1x-boot/boot1
bunnie 53c92df8a5 add uf2-spim feature to bootloader
All the changes here (except one print statement change) are
intended to be feature-gated behind `uf2-spim` in the bootloader.
So, in theory, this should have no boot1 regressions.

The uf2-spim feature is intended for alt-boot and alternate
compiled boot1's and extend the serial-only upload path with
the following features:

1. ability to write SPIM (spi flash memory) using the same
.uf2 files as the USB path
2. requirement of CRC's on blocks
3. a quick test to determine if CRC has been enabled or not
via the `has-crc` command (returns `true` if required, an
error/unknown command message if not).

The CRC makes long/large file uploads reliable, allowing
full device provisioning to happen via serial only, in
cases where USB for whatever reason is not present or available.
2026-06-24 15:08:12 +08:00
..
src add uf2-spim feature to bootloader 2026-06-24 15:08:12 +08:00
build.rs add a draft boot1 2025-09-29 13:52:38 +08:00
Cargo.toml add uf2-spim feature to bootloader 2026-06-24 15:08:12 +08:00