in order to trigger an update in early boot, all the security
sensitive servers have to have their connection tables occupied
(I guess the fancy term is the "capabilities" need to be allocated.
whatevs. #notanacademic).
This fixes the flow so those capabilities are occupied before
we get to the update check. Also fixes options to ignore updates.
This allows for `ditherpunk` config to have a much larger
stack size on select processes only.
The cost comes at a 4k fixed overhead for the sacrificial
wrapper thread, so we lose about 20k of runtime RAM, even
when ditherpunk is *not* activated (because we're
always wrapping the threads).
There is no impact on scheduling or CPU utilization, as the
wrapper thread blocks and is never scheduled once the real
main starts. However, it does subtract one thread from the
total available thread pool.
This macro will be removed, since it is no longer necessary. Remove this
macro across the project and replace it with a standard `main()`
function.
Signed-off-by: Sean Cross <sean@xobs.io>
change the notification modal to accept the primary message and an
Option of independent text to display as a qrcode
pub fn show_notification(&self, notification: &str, qrtext:Option<&str>) -> Result<(), xous::Error> {}
This is a start on issue #111, where instead of starting a throw-away
server and doing a "yield" loop to emulate blocking behavior, messages
are instead stored so they don't drop, thus keeping a blocking
message blocking.
This call was originally part of the RTC driver, but when we
refactored things out, this was forgotten.
So, what would happen is, if you did a coldboot or reboot,
an alarm would get set and...well, the way the RTC blocks
is it'll keep asserting the alarm until you clear it.
This prevents the system from sleeping, and also keeps
the CPU pegged at 100% for some reason. The prevention
from sleeping makes sense to me. The CPU at 100% probably
indicates there's a problem in the event router, but
this path isn't used for anything at the moment so
we'll just open an issue and leave it as technical debt.
modals don't work when triggered in the status thread in hosted
mode (but they do, somehow, on real hardware). I think this
is an actual locking problem that would exhibit itself if
we had a true multiprocessor system, but since real hardware
is a single processor it doesn't show.
now you set time in local time. If time zone hasn't been set already,
it'll prompt you to enter a time zone.
The main oddity is now that you have to know your time zone as
an offset from UTC. This can be fixed later with a proper symbolic
TZ to numeric mapping, but, that's actually a surprisingly hard
feature to implement.
Time is replaced with error messages that indicate either time has not
been set ("Set Time"), or the PDDB has not been mounted (it says
"Login?"), if there is an error. otherwise it displays time
in the local timezone.
Time setting is kind of awful in that you have to enter the time
as UTC. And then a timezone as an offset in hours from UTC. It's
very bare-iron.
this will disconnect the battery and put the device in a very low power
state, and you can only power it back on again by plugging it into
a power source briefly.
tts is working fairly well and much more stably, menus and ui
elements are wired up for tts.
just waiting for the latest braille keyboard pcb to come in and
then we'll be able to fire off some prototypes...
This commit adds the current's app name to the security bar at the top
of the screen, just beneath the status bar.
I had to add a new generated function to map app index back to its name,
along with an enum to signal whether or not the id is valid.
Signed-off-by: Gianguido Sorà <me@gsora.xyz>
Keyboard setting is "the one and only" exception to user settings
that are saved without encryption. This is because you need your
keyboard layout to be set in order for you to type your password.
Thus, this needed a bit of a special-case to handle its storage record.
We decided to lop off 1 page from the loader and have it store
the keyboard layout code.
Let's hope we can have the discipline to really just store that
one word of information and not later be like "gee wally, you have
a whoooole 4092 unused bytes of space we can cram unencrypted
user settings in, sure would be a waste to not put those use those".
Good enough so that if you type `net server` and you hit the IP
address of the device, it'll respond with something like
Hello from Precursor!
I have been up for 86087 ms.
There's still all kinds of bugs, I'm sure. But ... I'm also not
sure /why/ you would want a web server on Precursor. This is more
just to make sure that the TCP stack isn't totally broken.
The "web server" as it may be is quite broken and doesn't parse
any headers and probably sends a bogus amount of data because
I can't figure out if the content length includes some new lines
or not. But really, this just isn't in scope. Works with Chrome,
Firefox shows the status page and then says "connection reset" and hides
all the information. Whatever, browser compatibility is well beyond
my pay grade!
The first "app" is just going to be a whole-framebuffer
demo that gets raw keys and does some stuff on the screen.
It's the starting point if you wanted to eg. write a simple
video game or something for the device, but you didn't care
about much of the other UX sugar.
Really clear up the roles and structures of word wrapping.
Significantly, we have now figured out that the word wrapper
should be the word wrapper, and that the text bounds should
be computed by a text bounds computation.
Conflating flexible text bounds with word wrapping makes
the math really hard.
So, the word wrapper always works with a bounding area starting
at 0,0, and will wrap until it hits a Point designated as its
absolute max bounds.
The returned typeset block is referenced to 0,0, and then it
is shifted to the correct location by the rendering function.
This externalizes the computation of the final location plus
the rendering bounds to the outer functions that need to care
about this, thus simplifying the word wrapper significantly.
Always reset the EC on boot. If we have a cold-boot situation,
it's hard to know what state the EC is in versus our stack;
a hard reset on the EC guarantees we at least always start from
the same point.
Note that on suspend/resume, there is no reset - the EC continues
trundling onwards, but the system was designed for this.
Saves a bit on resources and the RTC crate doesn't need
to be stand-alone now that the modals crate is a thing;
we are able to split the UX routine to manage the RTC out
of the code that actually manages the hardware.
The hardware code ended up in LLIO, and the UX ended up in the status
routine.
Each Cargo.toml now includes a comment which remnids maintainers
of the dependency policy for Xous (that is, nail down every dependency
to the minor number).
Versions are pinned down to the minor number. Yes, this means that
we don't automatically pull in features and bug updates from crates.io,
but it also means we don't pull in new attack surfaces and code that
hasn't been tested or reviewed. I'd like this process to be very deliberate
and not automatic for Xous.
The `rand` crate is almost pinned down to a single version, except
for an odd dependency that's pulled in by hosted mode that depends
on rand 0.8.4 via a subordinate dependency via the `tempfile` crate.
Pondering if it's worth it to try and eliminate that, because the
0.8.4 version doesn't get compiled into any version that touches
real hardware. It just makes it harder to analyze the Cargo.lock
file, mostly. I think I'll leave it as-is.
right character gets cut off, but it's because the cursor is
the top left of the last character. add one character height plus
margin to the shortening, because the margin itself could be 0
in many case.