In general, hosted mode is assumed "by default" if the target
is not Xous. This allows packages to be built cleanly on command
lines that don't know to pass a --feature flag to specify a target.
However, an explicit "hosted" flag is still retained so that we
can confirm the build system intent. This saves us from the failure
mode that we thought we were building for target A, but accidentally
ommitted the flag, and instead we've been silently building for
"hosted" mode without any warning. The main consumer of the "hosted"
flag is now just the build.rs script inside of the utralib.
This will allow for e.g. xous on riscv32-imac but not a precursor
target, for example: by using feature selectors we get to have
a bigger range of targets that we support, such as for implementations
that haven't been upstreamed or have official target-triples.
The downsides are:
- patch override libraries don't absorb feature flags. so, for
example, the AES crate that is used to patch other crates won't
be aware of the target features without modifying the referencing
crates.
- features are normally meant to be additive, but target features
are mutually exclusive. The mutex is enforced by a check in
utralib that throws a panic on build if two targets are accidentally
selected at the same time.
This macro will be removed, since it is no longer necessary. Remove this
macro across the project and replace it with a standard `main()`
function.
Signed-off-by: Sean Cross <sean@xobs.io>
A lot of packages are depending on 0.6 api, which requires a crate
that has OS specific TRNG calls. This patch keeps the 0.5 calls
inside the TRNG crate as direct API calls, and migrates to support
a 0.6 api to a patched version of getrandom that supports Xous.
This is a start on issue #111, where instead of starting a throw-away
server and doing a "yield" loop to emulate blocking behavior, messages
are instead stored so they don't drop, thus keeping a blocking
message blocking.
Add a "Later" stage, and have exactly one "Last" stage.
"Last" to suspend is the ticktimer -- this is crucial for
basically everything else to work. The other really
low level stuff that needs to work to the last minute is
now in the "Later" bin.
now you set time in local time. If time zone hasn't been set already,
it'll prompt you to enter a time zone.
The main oddity is now that you have to know your time zone as
an offset from UTC. This can be fixed later with a proper symbolic
TZ to numeric mapping, but, that's actually a surprisingly hard
feature to implement.
std::time::SystemTime returns time in UTC.
That's great, but a lot of times we want local time.
Unfortunately, we can't use `chrono` to do that, because
chrono figures out what your time zone is usind `libc`, which
is a thing Xous doesn't have.
the `LocalTime` server is Xous' solution to that problem. it
returns the corret time offset based on the time zone.
You can still use `chrono` to convert the returned time into
strings and to compute durations.
the u64 in and of itself is meaningless, without the context
from the PDDB that adds the offset to wall clock time plus
time zone. This is glued together by the time.rs stub inside
the status service.
This will create a 100MiB file in tools/ppdb-images/hosted.bin
(sorry!!) which is persistent storage for hosted mode.
Delete the file if you want to start over from scratch.
It's...pretty brittle. I expect problems, but maybe it will at
least get things moving.
since xous 0.9.5, we've had a Box and we've had threads, so now we
can put the callback in a Box and pass it to a thread, instead
of relying on an `unsafe` work-around to get the callback function
pointer into the thread's environment.
also remove async write callbacks: in practice, these aren't used
Downside of this refactor is that threads for handling the
callbacks are not spawned on demand, they are spawned at boot,
leading to about an extra 68k of RAM used (most of it being
consumed in the codec block, actually). Some of this is also
probably extra object code because we're using more of the stdlib
primitives, which carry some weight.
Was doing disjoint loads and stores on an Atomic, really, should
be using the fetch_add, fetch_sub variants to be proper.
Didn't seem to impact anything but maybe there's a future version
of me that high fives me for doing this.
Saves a bit on resources and the RTC crate doesn't need
to be stand-alone now that the modals crate is a thing;
we are able to split the UX routine to manage the RTC out
of the code that actually manages the hardware.
The hardware code ended up in LLIO, and the UX ended up in the status
routine.
Each Cargo.toml now includes a comment which remnids maintainers
of the dependency policy for Xous (that is, nail down every dependency
to the minor number).
Versions are pinned down to the minor number. Yes, this means that
we don't automatically pull in features and bug updates from crates.io,
but it also means we don't pull in new attack surfaces and code that
hasn't been tested or reviewed. I'd like this process to be very deliberate
and not automatic for Xous.
The `rand` crate is almost pinned down to a single version, except
for an odd dependency that's pulled in by hosted mode that depends
on rand 0.8.4 via a subordinate dependency via the `tempfile` crate.
Pondering if it's worth it to try and eliminate that, because the
0.8.4 version doesn't get compiled into any version that touches
real hardware. It just makes it harder to analyze the Cargo.lock
file, mostly. I think I'll leave it as-is.
sleep killbounce wouldn't work because we started limiting the
number of connections to the LLIO.
This change makes connections to the LLIO unlimited, but perhaps later
on we should split out the I2C bus into a separate security domain,
so that the LLIO's unlimited connection policy doesn't introduce a
risk into a rogue process being able to overwrite the RTC contents.
Probably about time to push some of this net stuff into main, even
though it's got a ways to go. This adds UDP/ICMP/DNS to the net stack,
but the ping probably needs to be refactored a bit to be *much simpler*
and more reliable, and there's some corner cases to chase.
this prevents less trusted processes from connecting to servers
after the kernel initializations are done.
this works so long as we don't have disconnects from the kernel
servers. In order to support disconnects we will also need a
way to re-enumerate the SID to guarantee that we don't have a re-use
problem. But for now, the kernel is not designed with any practical
disconnect mechanism; there is no code that calls the Quit mechanism
on any server.
- inverted text indicates a trusted message. policy is enforced in the GAM.
- we don't have a way to lock the USB port yet; but at least now it's communicated.
the connection number is re-used for all objects created
within a process space, so you can't `Drop` the connection
immediately when an object goes out of scope. You have to
make sure all instance of the object go out of scope. This
patch adds reference counting to all the objects so that
the `Drop` function works as intended.
the concurrency issues on I2C are getting hairy, and it was probably a
dubious decision from the start to merge I2C into the LLIO block; but
originally this was motivated by the idea of keeping all the
"miscellaneous slow stuff" in one process to keep the memory footprint
small and make code a bit more readable.
Keeping I2C in the same process space as the LLIO but splitting it
into its own thread and server splits the difference, by giving us
more options to deal with the concurrency, without inflating the size
of the kernel binary and allocating a lot of extra static data.
the amount of time it takes to send messages to initiate each
packet is too slow, and causing timeouts. By handling the I2C
directly in an interrupt handler, we accelerate the bus, at
the expense of no visibility via log/trace messages.
Here's an arcane bug for you:
When powering down, the Spartan 7 3.3V I/O drivers will
output a roughly 800us wide glitch as 3.3V falls below around
1.7V, if the 0.95V core voltage comes down first (which it does
because we have an active discharge on 0.95V, but not on 3.3V).
In this case, it's just wide and high enough to cause the
BOOST mode line to engage, which takes the BOOST output
and ties it to VBUS, which is just enough for the system to
think you're powering it back on again. Which is not what
you want when powering down.
The ultimate fix was to put a heftier pull-down on the BOOST
line so that it can't trip the BOOST output into the VBUS.
Another option could be more active discharge FETs, but that
would require a full board spin and we are already at certification,
so we'll stick with the stronger pull-down on BOOST. It seems to
be a robust fix in the worst corner cases we can find.
The downside is that when powering an external USB device,
you are burning an extra 30mW of power overcoming the pull-down,
but typically, any external USB devices plugged into Precursor
will burn far in excess of that, so the delta should be negligible.