Add the loader into the main workspace, removing it from its own
sub-workspace. We can do this now that we can specify the linker script
in `build.rs`.
This improves IDE support, and should shrink disk storage requirements.
Signed-off-by: Sean Cross <sean@xobs.io>
This adds a working Ethernet implementation based on the WF200. It
currently gets connected to a Linux machine running a udhcpd server,
however it could also get connected to a TUN/TAP connection on Linux or
Mac.
Signed-off-by: Sean Cross <sean@xobs.io>
The COM bus is fundamentally three things: The SoC, the EC, and the glue
that binds the two together.
Now that we have the `EnsureTypeIsLoaded` trick, split the file into
three different groups.
Signed-off-by: Sean Cross <sean@xobs.io>
Emulate both the SPINOR block as well as the OSPI flash attached to it.
With this change, the PDDB can now be initialized and resets itself
properly. Additionally, data persists across virtual reboots.
Data does not persist across runs of the emulator. That will follow in
an upcoming patch.
Signed-off-by: Sean Cross <sean@xobs.io>
Connect the EC to the SoC. This allows for emulating both the EC and SoC
in tandem. Messages flow via a 16-bit bus. When data is not available,
`0xdddd` is returned.
There is a HOLD line that goes from the EC to the SoC. This is tied to
the inverse of presence of data in the EC FIFO -- when it's empty, HOLD
is `1`, and when there is data it's `0`.
Signed-off-by: Sean Cross <sean@xobs.io>
Add the loader into the main workspace, removing it from its own
sub-workspace. We can do this now that we can specify the linker script
in `build.rs`.
This improves IDE support, and should shrink disk storage requirements.
Signed-off-by: Sean Cross <sean@xobs.io>
This image file should get loaded onto SPI flash rather than into RAM,
since RAM gets cleared by the bootloader now.
Place it at a location that matches real hardware.
Signed-off-by: Sean Cross <sean@xobs.io>
The addresses of the target system have changed. Update the platform
definition file to keep these addresses in sync.
Signed-off-by: Sean Cross <sean@xobs.io>
The `xtask` command has come a long way, and is the preferred method of
building this repositry. Document the fun ways it can be used.
Signed-off-by: Sean Cross <sean@xobs.io>