add cramium to loader target

This commit is contained in:
bunnie 2023-07-17 18:23:17 +08:00
parent 069edbc255
commit e0c8cc1da4
5 changed files with 452 additions and 63 deletions

View file

@ -10,9 +10,21 @@ fn main() {
let linker_file_path = if target.starts_with("riscv") {
println!("cargo:rustc-link-search={}", out_dir.display());
println!("cargo:rustc-link-arg=-Tlink.x");
#[cfg(feature="cramium-soc")]
println!("cargo:rustc-link-arg=-Tlink-soc.x");
#[cfg(feature="cramium-soc")]
let p = PathBuf::from("src/platform/cramium/link-soc.x");
#[cfg(feature="cramium-fpga")]
println!("cargo:rustc-link-arg=-Tlink-fpga.x");
#[cfg(feature="cramium-fpga")]
let p = PathBuf::from("src/platform/cramium/link-fpga.x");
PathBuf::from("link.x")
#[cfg(not(any(feature="cramium-fpga", feature="cramium-soc")))]
println!("cargo:rustc-link-arg=-Tlink.x");
#[cfg(not(any(feature="cramium-fpga", feature="cramium-soc")))]
let p = PathBuf::from("link.x");
p
} else if target.starts_with("armv7a") {
let name = env::var("CARGO_PKG_NAME").unwrap();

View file

@ -1,61 +1 @@
pub const RAM_SIZE: usize = utralib::generated::HW_SRAM_MEM_LEN;
pub const RAM_BASE: usize = utralib::generated::HW_SRAM_MEM;
// location of kernel, as offset from the base of ReRAM. This needs to match up with what is in link.x.
pub const KERNEL_OFFSET: usize = 0x9000;
#[cfg(feature="platform-tests")]
pub mod duart {
pub const UART_DOUT: utralib::Register = utralib::Register::new(0, 0xff);
pub const UART_DOUT_DOUT: utralib::Field = utralib::Field::new(8, 0, UART_DOUT);
pub const UART_CTL: utralib::Register = utralib::Register::new(1, 1);
pub const UART_CTL_EN: utralib::Field = utralib::Field::new(1, 0, UART_CTL);
pub const UART_BUSY: utralib::Register = utralib::Register::new(2, 1);
pub const UART_BUSY_BUSY: utralib::Field = utralib::Field::new(1, 0, UART_BUSY);
pub const HW_DUART_BASE: usize = 0x4000_1000;
}
#[cfg(feature="platform-tests")]
struct Duart {
csr: utralib::CSR::<u32>,
}
#[cfg(feature="platform-tests")]
impl Duart {
pub fn new() -> Self {
let mut duart_csr = utralib::CSR::new(duart::HW_DUART_BASE as *mut u32);
duart_csr.wfo(duart::UART_CTL_EN, 1);
Duart {
csr: duart_csr,
}
}
pub fn putc(&mut self, ch: char) {
while self.csr.rf(duart::UART_BUSY_BUSY) != 0 {
// spin wait
}
// the code here bypasses a lot of checks to simulate very fast write cycles so
// that the read waitback actually returns something other than not busy.
// unsafe {(duart::HW_DUART_BASE as *mut u32).write_volatile(ch as u32) }; // this line really ensures we have to readback something, but it causes double-printing
while unsafe{(duart::HW_DUART_BASE as *mut u32).add(2).read_volatile()} != 0 {
// wait
}
unsafe {(duart::HW_DUART_BASE as *mut u32).write_volatile(ch as u32) };
}
pub fn puts(&mut self, s: &str) {
for c in s.as_bytes() {
self.putc(*c as char);
}
}
}
#[cfg(feature="platform-tests")]
fn test_duart() {
// println!("Duart test\n");
let mut duart = Duart::new();
loop {
duart.puts("hello world\n");
}
}
#[cfg(feature="platform-tests")]
pub fn platform_tests() {
test_duart();
}
pub mod cramium;

View file

@ -0,0 +1,61 @@
pub const RAM_SIZE: usize = utralib::generated::HW_SRAM_MEM_LEN;
pub const RAM_BASE: usize = utralib::generated::HW_SRAM_MEM;
// location of kernel, as offset from the base of ReRAM. This needs to match up with what is in link.x.
pub const KERNEL_OFFSET: usize = 0x9000;
#[cfg(feature="platform-tests")]
pub mod duart {
pub const UART_DOUT: utralib::Register = utralib::Register::new(0, 0xff);
pub const UART_DOUT_DOUT: utralib::Field = utralib::Field::new(8, 0, UART_DOUT);
pub const UART_CTL: utralib::Register = utralib::Register::new(1, 1);
pub const UART_CTL_EN: utralib::Field = utralib::Field::new(1, 0, UART_CTL);
pub const UART_BUSY: utralib::Register = utralib::Register::new(2, 1);
pub const UART_BUSY_BUSY: utralib::Field = utralib::Field::new(1, 0, UART_BUSY);
pub const HW_DUART_BASE: usize = 0x4000_1000;
}
#[cfg(feature="platform-tests")]
struct Duart {
csr: utralib::CSR::<u32>,
}
#[cfg(feature="platform-tests")]
impl Duart {
pub fn new() -> Self {
let mut duart_csr = utralib::CSR::new(duart::HW_DUART_BASE as *mut u32);
duart_csr.wfo(duart::UART_CTL_EN, 1);
Duart {
csr: duart_csr,
}
}
pub fn putc(&mut self, ch: char) {
while self.csr.rf(duart::UART_BUSY_BUSY) != 0 {
// spin wait
}
// the code here bypasses a lot of checks to simulate very fast write cycles so
// that the read waitback actually returns something other than not busy.
// unsafe {(duart::HW_DUART_BASE as *mut u32).write_volatile(ch as u32) }; // this line really ensures we have to readback something, but it causes double-printing
while unsafe{(duart::HW_DUART_BASE as *mut u32).add(2).read_volatile()} != 0 {
// wait
}
unsafe {(duart::HW_DUART_BASE as *mut u32).write_volatile(ch as u32) };
}
pub fn puts(&mut self, s: &str) {
for c in s.as_bytes() {
self.putc(*c as char);
}
}
}
#[cfg(feature="platform-tests")]
fn test_duart() {
// println!("Duart test\n");
let mut duart = Duart::new();
loop {
duart.puts("hello world\n");
}
}
#[cfg(feature="platform-tests")]
pub fn platform_tests() {
test_duart();
}

View file

@ -0,0 +1,188 @@
MEMORY
{
/* we are using an unsigned loader, so the offset is not 1k offset */
FLASH : ORIGIN = 0x60500000, LENGTH = 32k
RAM : ORIGIN = 0x61000000, LENGTH = 16M
}
/*
Fonts go from 0x2053_0000 to 0x2097_0000
*/
REGION_ALIAS("REGION_TEXT", FLASH);
REGION_ALIAS("REGION_RODATA", FLASH);
REGION_ALIAS("REGION_DATA", RAM);
REGION_ALIAS("REGION_BSS", RAM);
REGION_ALIAS("REGION_STACK", RAM);
REGION_ALIAS("REGION_HEAP", RAM);
/* Size of the main kernel stack */
_stack_size = 16K;
_eheap = ORIGIN(RAM) + LENGTH(RAM);
PROVIDE(_stext = ORIGIN(REGION_TEXT));
PROVIDE(_stack_start = ORIGIN(REGION_STACK) + LENGTH(REGION_STACK));
PROVIDE(_max_hart_id = 0);
PROVIDE(_hart_stack_size = 2K);
PROVIDE(_heap_size = 0);
PROVIDE(trap_handler = default_trap_handler);
/* # Pre-initialization function */
/* If the user overrides this using the `#[pre_init]` attribute or by creating a `__pre_init` function,
then the function this points to will be called before the RAM is initialized. */
PROVIDE(__pre_init = default_pre_init);
/* # Multi-processing hook function
fn _mp_hook() -> bool;
This function is called from all the harts and must return true only for one hart,
which will perform memory initialization. For other harts it must return false
and implement wake-up in platform-dependent way (e.g. after waiting for a user interrupt).
*/
PROVIDE(_mp_hook = default_mp_hook);
ENTRY(_start)
SECTIONS
{
.text.dummy (NOLOAD) :
{
/* This section is intended to make _stext address work */
. = ABSOLUTE(_stext);
} > REGION_TEXT
.text _stext :
{
/* Put reset handler first in .text section so it ends up as the entry */
/* point of the program. */
KEEP(*(.text.init));
KEEP(*(.init));
KEEP(*(.init.rust));
. = ALIGN(4);
KEEP(*(.trap));
KEEP(*(.trap.rust));
*(.text .text.*);
} > REGION_TEXT
.rodata : ALIGN(4)
{
*(.rodata .rodata.*);
/* 4-byte align the end (VMA) of this section.
This is required by LLD to ensure the LMA of the following .data
section will have the correct alignment. */
. = ALIGN(4);
_etext = .;
} > REGION_RODATA
.data : ALIGN(4)
{
_sidata = LOADADDR(.data);
_sdata = .;
/* Must be called __global_pointer$ for linker relaxations to work. */
PROVIDE(__global_pointer$ = . + 0x800);
*(.sdata .sdata.* .sdata2 .sdata2.*);
*(.data .data.*);
. = ALIGN(4);
_edata = .;
} > REGION_DATA AT > REGION_RODATA
/* .fonts : ALIGN(65536)
{
KEEP(*(.fontdata));
} > FONTS */
.bss (NOLOAD) :
{
_sbss = .;
*(.sbss .sbss.* .bss .bss.*);
. = ALIGN(4);
_ebss = .;
} > REGION_BSS
/* fictitious region that represents the memory available for the stack */
.stack (NOLOAD) :
{
_sstack = .;
. += _stack_size;
. = ALIGN(4096);
_estack = .;
} > REGION_STACK
/* fictitious region that represents the memory available for the heap */
.heap (NOLOAD) :
{
. = ALIGN(4);
_sheap = .;
/* _eheap is defined elsewhere and is the remainder of RAM */
} > REGION_HEAP
/* fake output .got section */
/* Dynamic relocations are unsupported. This section is only used to detect
relocatable code in the input files and raise an error if relocatable code
is found */
.got (INFO) :
{
KEEP(*(.got .got.*));
}
/* Discard .eh_frame, we are not doing unwind on panic so it is not needed */
/DISCARD/ :
{
*(.eh_frame);
*(.eh_frame_hdr);
}
}
/* Do not exceed this mark in the error messages above | */
ASSERT(ORIGIN(REGION_TEXT) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_TEXT must be 4-byte aligned");
ASSERT(ORIGIN(REGION_RODATA) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_RODATA must be 4-byte aligned");
ASSERT(ORIGIN(REGION_DATA) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_DATA must be 4-byte aligned");
ASSERT(ORIGIN(REGION_HEAP) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_HEAP must be 4-byte aligned");
ASSERT(ORIGIN(REGION_TEXT) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_TEXT must be 4-byte aligned");
ASSERT(ORIGIN(REGION_STACK) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_STACK must be 4-byte aligned");
ASSERT(_stext % 4 == 0, "
ERROR(riscv-rt): `_stext` must be 4-byte aligned");
ASSERT(_sdata % 4 == 0 && _edata % 4 == 0, "
BUG(riscv-rt): .data is not 4-byte aligned");
ASSERT(_sidata % 4 == 0, "
BUG(riscv-rt): the LMA of .data is not 4-byte aligned");
ASSERT(_sbss % 4 == 0 && _ebss % 4 == 0, "
BUG(riscv-rt): .bss is not 4-byte aligned");
ASSERT(_sheap % 4 == 0, "
BUG(riscv-rt): start of .heap is not 4-byte aligned");
ASSERT(_stext + SIZEOF(.text) < ORIGIN(REGION_TEXT) + LENGTH(REGION_TEXT), "
ERROR(riscv-rt): The .text section must be placed inside the REGION_TEXT region.
Set _stext to an address smaller than 'ORIGIN(REGION_TEXT) + LENGTH(REGION_TEXT)'");
ASSERT(SIZEOF(.stack) > (_max_hart_id + 1) * _hart_stack_size, "
ERROR(riscv-rt): .stack section is too small for allocating stacks for all the harts.
Consider changing `_max_hart_id` or `_hart_stack_size`.");
ASSERT(SIZEOF(.got) == 0, "
.got section detected in the input files. Dynamic relocations are not
supported. If you are linking to C code compiled using the `gcc` crate
then modify your build script to compile the C code _without_ the
-fPIC flag. See the documentation of the `gcc::Config.fpic` method for
details.");
/* Do not exceed this mark in the error messages above | */

View file

@ -0,0 +1,188 @@
MEMORY
{
/* we are using an unsigned loader, so the offset is not 1k offset */
FLASH : ORIGIN = 0x60000000, LENGTH = 4M
RAM : ORIGIN = 0x61000000, LENGTH = 2M
}
/*
Fonts go from 0x2053_0000 to 0x2097_0000
*/
REGION_ALIAS("REGION_TEXT", FLASH);
REGION_ALIAS("REGION_RODATA", FLASH);
REGION_ALIAS("REGION_DATA", RAM);
REGION_ALIAS("REGION_BSS", RAM);
REGION_ALIAS("REGION_STACK", RAM);
REGION_ALIAS("REGION_HEAP", RAM);
/* Size of the main kernel stack */
_stack_size = 16K;
_eheap = ORIGIN(RAM) + LENGTH(RAM);
PROVIDE(_stext = ORIGIN(REGION_TEXT));
PROVIDE(_stack_start = ORIGIN(REGION_STACK) + LENGTH(REGION_STACK));
PROVIDE(_max_hart_id = 0);
PROVIDE(_hart_stack_size = 2K);
PROVIDE(_heap_size = 0);
PROVIDE(trap_handler = default_trap_handler);
/* # Pre-initialization function */
/* If the user overrides this using the `#[pre_init]` attribute or by creating a `__pre_init` function,
then the function this points to will be called before the RAM is initialized. */
PROVIDE(__pre_init = default_pre_init);
/* # Multi-processing hook function
fn _mp_hook() -> bool;
This function is called from all the harts and must return true only for one hart,
which will perform memory initialization. For other harts it must return false
and implement wake-up in platform-dependent way (e.g. after waiting for a user interrupt).
*/
PROVIDE(_mp_hook = default_mp_hook);
ENTRY(_start)
SECTIONS
{
.text.dummy (NOLOAD) :
{
/* This section is intended to make _stext address work */
. = ABSOLUTE(_stext);
} > REGION_TEXT
.text _stext :
{
/* Put reset handler first in .text section so it ends up as the entry */
/* point of the program. */
KEEP(*(.text.init));
KEEP(*(.init));
KEEP(*(.init.rust));
. = ALIGN(4);
KEEP(*(.trap));
KEEP(*(.trap.rust));
*(.text .text.*);
} > REGION_TEXT
.rodata : ALIGN(4)
{
*(.rodata .rodata.*);
/* 4-byte align the end (VMA) of this section.
This is required by LLD to ensure the LMA of the following .data
section will have the correct alignment. */
. = ALIGN(4);
_etext = .;
} > REGION_RODATA
.data : ALIGN(4)
{
_sidata = LOADADDR(.data);
_sdata = .;
/* Must be called __global_pointer$ for linker relaxations to work. */
PROVIDE(__global_pointer$ = . + 0x800);
*(.sdata .sdata.* .sdata2 .sdata2.*);
*(.data .data.*);
. = ALIGN(4);
_edata = .;
} > REGION_DATA AT > REGION_RODATA
/* .fonts : ALIGN(65536)
{
KEEP(*(.fontdata));
} > FONTS */
.bss (NOLOAD) :
{
_sbss = .;
*(.sbss .sbss.* .bss .bss.*);
. = ALIGN(4);
_ebss = .;
} > REGION_BSS
/* fictitious region that represents the memory available for the stack */
.stack (NOLOAD) :
{
_sstack = .;
. += _stack_size;
. = ALIGN(4096);
_estack = .;
} > REGION_STACK
/* fictitious region that represents the memory available for the heap */
.heap (NOLOAD) :
{
. = ALIGN(4);
_sheap = .;
/* _eheap is defined elsewhere and is the remainder of RAM */
} > REGION_HEAP
/* fake output .got section */
/* Dynamic relocations are unsupported. This section is only used to detect
relocatable code in the input files and raise an error if relocatable code
is found */
.got (INFO) :
{
KEEP(*(.got .got.*));
}
/* Discard .eh_frame, we are not doing unwind on panic so it is not needed */
/DISCARD/ :
{
*(.eh_frame);
*(.eh_frame_hdr);
}
}
/* Do not exceed this mark in the error messages above | */
ASSERT(ORIGIN(REGION_TEXT) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_TEXT must be 4-byte aligned");
ASSERT(ORIGIN(REGION_RODATA) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_RODATA must be 4-byte aligned");
ASSERT(ORIGIN(REGION_DATA) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_DATA must be 4-byte aligned");
ASSERT(ORIGIN(REGION_HEAP) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_HEAP must be 4-byte aligned");
ASSERT(ORIGIN(REGION_TEXT) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_TEXT must be 4-byte aligned");
ASSERT(ORIGIN(REGION_STACK) % 4 == 0, "
ERROR(riscv-rt): the start of the REGION_STACK must be 4-byte aligned");
ASSERT(_stext % 4 == 0, "
ERROR(riscv-rt): `_stext` must be 4-byte aligned");
ASSERT(_sdata % 4 == 0 && _edata % 4 == 0, "
BUG(riscv-rt): .data is not 4-byte aligned");
ASSERT(_sidata % 4 == 0, "
BUG(riscv-rt): the LMA of .data is not 4-byte aligned");
ASSERT(_sbss % 4 == 0 && _ebss % 4 == 0, "
BUG(riscv-rt): .bss is not 4-byte aligned");
ASSERT(_sheap % 4 == 0, "
BUG(riscv-rt): start of .heap is not 4-byte aligned");
ASSERT(_stext + SIZEOF(.text) < ORIGIN(REGION_TEXT) + LENGTH(REGION_TEXT), "
ERROR(riscv-rt): The .text section must be placed inside the REGION_TEXT region.
Set _stext to an address smaller than 'ORIGIN(REGION_TEXT) + LENGTH(REGION_TEXT)'");
ASSERT(SIZEOF(.stack) > (_max_hart_id + 1) * _hart_stack_size, "
ERROR(riscv-rt): .stack section is too small for allocating stacks for all the harts.
Consider changing `_max_hart_id` or `_hart_stack_size`.");
ASSERT(SIZEOF(.got) == 0, "
.got section detected in the input files. Dynamic relocations are not
supported. If you are linking to C code compiled using the `gcc` crate
then modify your build script to compile the C code _without_ the
-fPIC flag. See the documentation of the `gcc::Config.fpic` method for
details.");
/* Do not exceed this mark in the error messages above | */