add debug routines for spim

This commit is contained in:
bunnie 2025-10-30 04:16:59 +08:00
parent 5a8c7c7aa3
commit da623430c6
2 changed files with 103 additions and 0 deletions

View file

@ -77,6 +77,7 @@ dabao-selftest = [
"xous-bio-bdma/bao1x",
]
test-boot0-writeprotect = []
spim-tests = []
verilator-only = []
default = ["bao1x-usb", "dabao-selftest"]

View file

@ -167,6 +167,106 @@ impl Repl {
));
}
}
#[cfg(feature = "spim-tests")]
"qe" => {
use bao1x_hal::board::SPIM_FLASH_IFRAM_ADDR;
use bao1x_hal::iox::Iox;
use bao1x_hal::udma::{GlobalConfig, Spim, SpimClkPha, SpimClkPol, SpimCs};
let udma_global = GlobalConfig::new();
// setup the I/O pins
let iox = Iox::new(utralib::generated::HW_IOX_BASE as *mut u32);
let channel = bao1x_hal::board::setup_memory_pins(&iox);
udma_global.clock_on(PeriphId::from(channel));
// safety: this is safe because clocks have been set up
let mut flash_spim = unsafe {
Spim::new_with_ifram(
channel,
// has to be half the clock frequency reaching the block, but run it as fast
// as we can run perclk
100_000_000 / 4,
100_000_000 / 2,
SpimClkPol::LeadingEdgeRise,
SpimClkPha::CaptureOnLeading,
SpimCs::Cs0,
0,
0,
None,
16, // just enough space to send commands
4096,
Some(6),
None,
bao1x_hal::ifram::IframRange::from_raw_parts(
SPIM_FLASH_IFRAM_ADDR,
SPIM_FLASH_IFRAM_ADDR,
4096 * 2,
),
)
};
flash_spim.mem_qpi_mode(false);
let status = flash_spim.flash_read_status_register();
crate::println!("status register: {:x}", status);
flash_spim.flash_set_qe();
let status = flash_spim.flash_read_status_register();
crate::println!("status register after qe set: {:x}", status);
}
#[cfg(feature = "spim-tests")]
"check_qpi" => {
use bao1x_hal::board::SPIM_FLASH_IFRAM_ADDR;
use bao1x_hal::iox::Iox;
use bao1x_hal::udma::{GlobalConfig, Spim, SpimClkPha, SpimClkPol, SpimCs};
let udma_global = GlobalConfig::new();
// setup the I/O pins
let iox = Iox::new(utralib::generated::HW_IOX_BASE as *mut u32);
let channel = bao1x_hal::board::setup_memory_pins(&iox);
udma_global.clock_on(PeriphId::from(channel));
// safety: this is safe because clocks have been set up
let mut flash_spim = unsafe {
Spim::new_with_ifram(
channel,
// has to be half the clock frequency reaching the block, but run it as fast
// as we can run perclk
100_000_000 / 4,
100_000_000 / 2,
SpimClkPol::LeadingEdgeRise,
SpimClkPha::CaptureOnLeading,
SpimCs::Cs0,
0,
0,
None,
16, // just enough space to send commands
4096,
Some(6),
None,
bao1x_hal::ifram::IframRange::from_raw_parts(
SPIM_FLASH_IFRAM_ADDR,
SPIM_FLASH_IFRAM_ADDR,
4096 * 2,
),
)
};
flash_spim.mem_read_id_flash();
// turn off QPI mode, in case it was set from a reboot in a bad state
flash_spim.mem_qpi_mode(false);
// sanity check: read ID
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("flash ID (init): {:x}", flash_id);
flash_spim.mem_qpi_mode(true);
// re-check the ID to confirm we entered QPI mode correctly
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("QPI flash ID: {:x}", flash_id);
flash_spim.mem_qpi_mode(false);
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("SPI flash ID: {:x}", flash_id);
flash_spim.mem_qpi_mode(true);
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("QPI flash ID: {:x}", flash_id);
}
#[cfg(feature = "bao1x")]
"rram" => {
if args.len() == 2 || args.len() == 3 {
@ -1051,6 +1151,8 @@ impl Repl {
crate::print!(", trngro, trngav");
#[cfg(feature = "dabao-selftest")]
crate::print!(", dbtest");
#[cfg(feature = "spim-tests")]
crate::print!(", qe, check_qpi");
crate::println!("");
}
}