fix USB handling

- statics origin set correctly
- debug prints on USB stack go to DUART to avoid a Tx storm
when debugging e.g. Tx packets on USB
This commit is contained in:
bunnie 2025-09-29 14:49:06 +08:00
parent 59ae767741
commit d0bd60d93c
6 changed files with 125 additions and 149 deletions

View file

@ -93,7 +93,6 @@ pub unsafe extern "C" fn rust_entry() -> ! {
// value, and provide feedback on the CPU operation by flashing the RGB LEDs.
let mut repl = crate::repl::Repl::new();
let mut new_key: Option<KeyPress>;
crate::println!("connect status {:?}", USB_CONNECTED.load(Ordering::SeqCst));
loop {
let (new_usb_state, new_portsc) = glue::usb_status();
@ -121,27 +120,25 @@ pub unsafe extern "C" fn rust_entry() -> ! {
// repl handling; USB is entirely interrupt driven, so there is no loop to handle it
if USB_CONNECTED.load(Ordering::SeqCst) {
if last_usb_state == UsbDeviceState::Configured {
// fetch characters from the Rx buffer
critical_section::with(|cs| {
let mut queue = USB_RX.borrow(cs).borrow_mut();
while let Some(byte) = queue.pop_front() {
repl.rx_char(byte);
}
});
// fetch characters from the Rx buffer
critical_section::with(|cs| {
let mut queue = USB_RX.borrow(cs).borrow_mut();
while let Some(byte) = queue.pop_front() {
repl.rx_char(byte);
}
});
// Process any command line requests
match repl.process() {
Err(e) => {
if let Some(m) = e.message {
crate::println!("{}", m);
repl.abort_cmd();
}
// Process any command line requests
match repl.process() {
Err(e) => {
if let Some(m) = e.message {
crate::println!("{}", m);
repl.abort_cmd();
}
_ => (),
};
glue::flush_tx();
}
}
_ => (),
};
glue::flush_tx();
} else {
// Handle keyboard events.
critical_section::with(|cs| {

View file

@ -13,7 +13,6 @@ static ALLOCATOR: linked_list_allocator::LockedHeap = linked_list_allocator::Loc
pub const RAM_SIZE: usize = utralib::generated::HW_SRAM_MEM_LEN;
pub const RAM_BASE: usize = utralib::generated::HW_SRAM_MEM;
pub const FLASH_BASE: usize = utralib::generated::HW_RERAM_MEM;
pub const SIGBLOCK_LEN: usize = 768; // this is adjusted inside builder.rs, in the sign-image invocation
const DATA_SIZE_BYTES: usize = 0x6000;
@ -179,7 +178,7 @@ pub fn early_init(mut board_type: bao1x_api::BoardTypeCoding) -> bao1x_api::Boar
// Now that SRAM trims are setup, initialize all the statics by writing to memory.
// For baremetal, the statics structure is just at the flash base.
const STATICS_LOC: usize = FLASH_BASE + SIGBLOCK_LEN;
const STATICS_LOC: usize = bao1x_api::BOOT1_START + SIGBLOCK_LEN;
// safety: this data structure is pre-loaded by the image loader and is guaranteed to
// only have representable, valid values that are aligned according to the repr(C) spec

View file

@ -149,3 +149,56 @@ pub fn setup_console<T: IoSetup + IoGpio>(
udma_uart
}
// ==== DUART-only debug print ==== -> this is used for USB feedback to avoid Tx loops on USB
/// Placeholder for debug
pub struct Duart {}
impl Duart {
/// Print a character
pub fn putc(&self, c: u8) {
let base = utra::duart::HW_DUART_BASE as *mut u32;
let mut uart = CSR::new(base);
if uart.rf(utra::duart::SFR_CR_SFR_CR) == 0 {
uart.wfo(utra::duart::SFR_CR_SFR_CR, 1);
}
while uart.r(utra::duart::SFR_SR) != 0 {}
uart.wo(utra::duart::SFR_TXD, c as u32);
}
}
impl Write for Duart {
fn write_str(&mut self, s: &str) -> Result<(), Error> {
for c in s.bytes() {
self.putc(c);
}
Ok(())
}
}
#[macro_use]
/// Hardware debug print module
pub mod debug_print_duart {
#[macro_export]
macro_rules! print_d
{
($($args:tt)+) => ({
use core::fmt::Write;
let _ = write!(crate::debug::Duart {}, $($args)+);
});
}
}
#[macro_export]
macro_rules! println_d
{
() => ({
$crate::print_d!("\r\n")
});
($fmt:expr) => ({
$crate::print_d!(concat!($fmt, "\r\n"))
});
($fmt:expr, $($args:tt)+) => ({
$crate::print_d!(concat!($fmt, "\r\n"), $($args)+)
});
}

View file

@ -83,78 +83,6 @@ pub unsafe fn init_usb() {
}
}
#[allow(dead_code)]
pub unsafe fn test_usb() {
if let Some(ref mut usb_ref) = USB {
let usb = &mut *core::ptr::addr_of_mut!(*usb_ref);
usb.reset();
let mut poweron = 0;
loop {
usb.udc_handle_interrupt();
if usb.pp() {
poweron += 1; // .pp() is a sham. MPW has no way to tell if power is applied. This needs to be fixed for bao1x.
}
delay(100);
if poweron >= 4 {
break;
}
}
usb.reset();
usb.init();
usb.start();
usb.update_current_speed();
// IRQ enable must happen without dependency on the hardware lock
usb.irq_csr.wo(utralib::utra::irqarray1::EV_PENDING, 0xffff_ffff); // blanket clear
usb.irq_csr.wfo(utralib::utra::irqarray1::EV_ENABLE_USBC_DUPE, 1);
crate::println!("hw started...");
/*
let mut vbus_on = false;
let mut vbus_on_count = 0;
let mut in_u0 = false;
loop {
if vbus_on == false && vbus_on_count == 4 {
crate::println!("vbus on");
usb.init();
usb.start();
vbus_on = true;
in_u0 = false;
} else if usb.pp() == true && vbus_on == false {
vbus_on_count += 1;
delay(100);
} else if usb.pp() == false && vbus_on == true {
crate::println!("20230802 vbus off during while");
usb.stop();
usb.reset();
vbus_on_count = 0;
vbus_on = false;
in_u0 = false;
} else if in_u0 == true && vbus_on == true {
crate::println!("USB stack started");
break;
// crate::println!("Would be uvc_bulk_thread()");
// uvc_bulk_thread();
} else if usb.ccs() == true && vbus_on == true {
crate::println!("enter U0");
in_u0 = true;
}
}
*/
let mut i = 0;
loop {
// wait for interrupt handler to do something
crate::println!("{}", i);
i += 1;
delay(10_000);
// for testing interrupt handler
let mut irqarray19 = utralib::CSR::new(utralib::utra::irqarray19::HW_IRQARRAY19_BASE as *mut u32);
irqarray19.wfo(utralib::utra::irqarray19::EV_SOFT_TRIGGER, 0x80);
}
} else {
crate::println!("USB core not allocated, skipping USB test");
}
}
fn delay(quantum: usize) {
use utralib::{CSR, utra};
// abuse the d11ctime timer to create some time-out like thing
@ -211,7 +139,7 @@ fn get_status_request(this: &mut CorigineUsb, request_type: u8, index: u16) {
}
fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
// crate::println!("handle_event: {:x?}", event_trb);
// crate::println_d!("handle_event: {:x?}", event_trb);
let pei = event_trb.get_endpoint_id();
let ep_num = pei >> 1;
let udc_ep = &mut this.udc_ep[pei as usize];
@ -223,14 +151,14 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
// this.print_status(portsc_val);
let portsc = PortSc(portsc_val);
// crate::println!("{:?}", portsc);
// crate::println_d!("{:?}", portsc);
if portsc.prc() && !portsc.pr() {
crate::println!("update_current_speed() - reset done");
crate::println_d!("update_current_speed() - reset done");
this.update_current_speed();
}
if portsc.csc() && portsc.ppc() && portsc.pp() && portsc.ccs() {
crate::println!("update_current_speed() - cable connect");
crate::println_d!("update_current_speed() - cable connect");
this.update_current_speed();
}
@ -241,7 +169,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
CompletionCode::try_from(event_trb.dw2.compl_code()).expect("Invalid completion code");
#[cfg(feature = "verbose-debug")]
crate::println!(
crate::println_d!(
"e_trb {:x} {:x} {:x} {:x}",
event_trb.dw0,
event_trb.dw1,
@ -250,7 +178,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
);
let residual_length = event_trb.dw2.trb_tran_len() as u16;
// update the dequeue pointer
// crate::println!("event_transfer {:x?}", event_trb);
// crate::println_d!("event_transfer {:x?}", event_trb);
let deq_pt =
unsafe { (event_trb.dw0 as *mut TransferTrbS).add(1).as_mut().expect("Couldn't deref ptr") };
if deq_pt.get_trb_type() == TrbType::Link {
@ -258,7 +186,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
} else {
udc_ep.deq_pt = AtomicPtr::new(deq_pt as *mut TransferTrbS);
}
// crate::println!("EventTransfer: comp_code {:?}, PEI {}", comp_code, pei);
// crate::println_d!("EventTransfer: comp_code {:?}, PEI {}", comp_code, pei);
let dir = (pei & 1) != 0;
if pei == 0 {
@ -270,19 +198,19 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
ret = CrgEvent::Data(1, 0, 0); // FIXME: this ordering contradicts the `dir` bit, but seems necessary to trigger the next packet send
}
} else {
crate::println!("EP0 unhandled comp_code: {:?}", comp_code);
crate::println_d!("EP0 unhandled comp_code: {:?}", comp_code);
ret = CrgEvent::None;
}
} else if pei >= 2 {
if comp_code == CompletionCode::Success || comp_code == CompletionCode::ShortPacket {
// crate::println!("EP{} xfer event, dir {}", ep_num, if dir { "OUT" } else { "IN" });
// crate::println_d!("EP{} xfer event, dir {}", ep_num, if dir { "OUT" } else { "IN" });
// xfer_complete
if let Some(f) = this.udc_ep[pei as usize].completion_handler {
// so unsafe. so unsafe. We're counting on the hardware to hand us a raw pointer
// that isn't corrupted.
let p_trb = unsafe { &*(event_trb.dw0 as *const TransferTrbS) };
#[cfg(feature = "verbose-debug")]
crate::println!(
crate::println_d!(
"p_trb {:x} {:x} {:x} {:x}",
p_trb.dphi,
p_trb.dplo,
@ -292,9 +220,9 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
f(this, p_trb.dplo as usize, p_trb.dw2.0, 0, residual_length);
}
} else if comp_code == CompletionCode::MissedServiceError {
crate::println!("MissedServiceError");
crate::println_d!("MissedServiceError");
} else {
crate::println!("EventTransfer {:?} event not handled", comp_code);
crate::println_d!("EventTransfer {:?} event not handled", comp_code);
}
}
}
@ -312,7 +240,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
let w_length = setup_pkt.w_length;
/*
crate::println!(
crate::println_d!(
" b_request={:x}, b_request_type={:x}, w_value={:04x}, w_index=0x{:x}, w_length={}",
setup_pkt.b_request,
setup_pkt.b_request_type,
@ -325,20 +253,20 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
if (setup_pkt.b_request_type & USB_TYPE_MASK) == USB_TYPE_STANDARD {
match setup_pkt.b_request {
USB_REQ_GET_STATUS => {
crate::println!("USB_REQ_GET_STATUS");
crate::println_d!("USB_REQ_GET_STATUS");
get_status_request(this, setup_pkt.b_request_type, w_index);
}
USB_REQ_SET_ADDRESS => {
crate::println!("USB_REQ_SET_ADDRESS: {}, tag: {}", w_value, this.setup_tag);
crate::println_d!("USB_REQ_SET_ADDRESS: {}, tag: {}", w_value, this.setup_tag);
this.set_addr(w_value as u8, CRG_INT_TARGET);
// crate::println!(" ******* set address done {}", w_value & 0xff);
// crate::println_d!(" ******* set address done {}", w_value & 0xff);
}
USB_REQ_SET_SEL => {
crate::println!("USB_REQ_SET_SEL");
crate::println_d!("USB_REQ_SET_SEL");
this.ep0_receive(this.ep0_buf.load(Ordering::SeqCst) as usize, w_length as usize, 0);
delay(100);
/* do set sel */
crate::println!("SEL_VALUE NOT HANDLED");
crate::println_d!("SEL_VALUE NOT HANDLED");
/*
crg_udc->sel_value.u1_sel_value = *ep0_buf;
crg_udc->sel_value.u1_pel_value = *(ep0_buf+1);
@ -347,19 +275,19 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
*/
}
USB_REQ_SET_ISOCH_DELAY => {
crate::println!("USB_REQ_SET_ISOCH_DELAY");
crate::println_d!("USB_REQ_SET_ISOCH_DELAY");
/* do set isoch delay */
this.ep0_send(0, 0, 0);
}
USB_REQ_CLEAR_FEATURE => {
crate::println!("USB_REQ_CLEAR_FEATURE");
crate::println!("*** UNSUPPORTED ***");
crate::println_d!("USB_REQ_CLEAR_FEATURE");
crate::println_d!("*** UNSUPPORTED ***");
/* do clear feature */
// clear_feature_request(setup_pkt.b_request_type, w_index, w_value);
}
USB_REQ_SET_FEATURE => {
crate::println!("USB_REQ_SET_FEATURE\r\n");
crate::println!("*** UNSUPPORTED ***");
crate::println_d!("USB_REQ_SET_FEATURE\r\n");
crate::println_d!("*** UNSUPPORTED ***");
/* do set feature */
/*
if crg_udc_get_device_state() == USB_STATE_CONFIGURED {
@ -402,11 +330,11 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
}
}
USB_REQ_GET_DESCRIPTOR => {
crate::println!("USB_REQ_GET_DESCRIPTOR");
crate::println_d!("USB_REQ_GET_DESCRIPTOR");
get_descriptor_request(this, w_value, w_index as usize, w_length as usize);
}
USB_REQ_GET_CONFIGURATION => {
crate::println!("USB_REQ_GET_CONFIGURATION");
crate::println_d!("USB_REQ_GET_CONFIGURATION");
let ep0_buf = unsafe {
core::slice::from_raw_parts_mut(
this.ep0_buf.load(Ordering::SeqCst) as *mut u8,
@ -421,13 +349,13 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
this.ep0_send(ep0_buf.as_ptr() as usize, 1, 0);
}
USB_REQ_SET_INTERFACE => {
crate::println!("USB_REQ_SET_INTERFACE");
crate::println_d!("USB_REQ_SET_INTERFACE");
this.cur_interface_num = (w_value & 0xF) as u8;
crate::println!("USB_REQ_SET_INTERFACE altsetting {}", this.cur_interface_num);
crate::println_d!("USB_REQ_SET_INTERFACE altsetting {}", this.cur_interface_num);
this.ep0_send(0, 0, 0);
}
USB_REQ_GET_INTERFACE => {
crate::println!("USB_REQ_GET_INTERFACE");
crate::println_d!("USB_REQ_GET_INTERFACE");
let ep0_buf = unsafe {
core::slice::from_raw_parts_mut(
this.ep0_buf.load(Ordering::SeqCst) as *mut u8,
@ -438,7 +366,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
this.ep0_send(ep0_buf.as_ptr() as usize, 1, 0);
}
_ => {
crate::println!(
crate::println_d!(
"USB_REQ default b_request=0x{:x}, b_request_type=0x{:x}",
setup_pkt.b_request,
setup_pkt.b_request_type
@ -449,7 +377,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
} else if (setup_pkt.b_request_type & USB_TYPE_MASK) == USB_TYPE_CLASS {
match setup_pkt.b_request {
0xff => {
crate::println!("Mass Storage Reset\r\n");
// crate::println_d!("Mass Storage Reset\r\n");
if (0 == w_value)
&& (InterfaceDescriptor::default_mass_storage().b_interface_number
== w_index as u8)
@ -467,7 +395,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
}
}
0xfe => {
crate::println!("Get Max LUN");
// crate::println_d!("Get Max LUN");
if w_index != 0 || w_value != 0 || w_length != 1 {
this.ep_halt(0, USB_RECV);
} else {
@ -483,7 +411,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
}
0x20 => {
// SET_LINE_CODING (host -> device, 7 bytes)
crate::println!("CDC SET_LINE_CODING");
// crate::println_d!("CDC SET_LINE_CODING");
let length = w_length as usize;
if length == 7 {
// queue EP0 OUT to receive the line coding structure
@ -495,7 +423,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
}
0x21 => {
// GET_LINE_CODING (device -> host, 7 bytes)
crate::println!("CDC GET_LINE_CODING");
// crate::println_d!("CDC GET_LINE_CODING");
let ep0_buf = unsafe {
core::slice::from_raw_parts_mut(
this.ep0_buf.load(Ordering::SeqCst) as *mut u8,
@ -511,14 +439,14 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
}
0x22 => {
// SET_CONTROL_LINE_STATE (host -> device, 0 length)
crate::println!("CDC SET_CONTROL_LINE_STATE, DTR/RTS = {:x}", w_value);
// crate::println_d!("CDC SET_CONTROL_LINE_STATE, DTR/RTS = {:x}", w_value);
// wValue bit0 = DTR, bit1 = RTS
// You can ignore since no real UART
this.ep0_send(0, 0, 0);
}
_ => {
crate::println!("Unhandled class request bRequest=0x{:x}", setup_pkt.b_request);
crate::println_d!("Unhandled class request bRequest=0x{:x}", setup_pkt.b_request);
this.ep_halt(0, USB_RECV);
}
}
@ -532,7 +460,7 @@ fn handle_event(this: &mut CorigineUsb, event_trb: &mut EventTrbS) -> CrgEvent {
panic!("data stage needs handling");
}
_ => {
crate::println!("Unexpected trb_type {:?}", event_trb.get_trb_type());
crate::println_d!("Unexpected trb_type {:?}", event_trb.get_trb_type());
}
}
ret

View file

@ -25,7 +25,6 @@ pub fn setup() -> (UsbDeviceState, u32) {
// Below is all unsafe because USB is global mutable state
unsafe {
if let Some(ref mut usb_ref) = crate::platform::bao1x::usb::USB {
crate::println!("inside update");
let usb = &mut *core::ptr::addr_of_mut!(*usb_ref);
usb.reset();
let mut poweron = 0;

View file

@ -238,18 +238,18 @@ pub fn usb_ep1_bulk_out_complete(
process_mass_storage_command(this, cbw);
// invalid_cbw = 0;
} else {
crate::println!("Invalid CBW, HALT");
crate::println_d!("Invalid CBW, HALT");
this.ep_halt(1, USB_SEND);
this.ep_halt(1, USB_RECV);
// invalid_cbw = 1;
}
} else if UmsState::CommandPhase == this.ms_state && (length != 31) {
crate::println!("invalid command");
crate::println_d!("invalid command");
this.ep_halt(1, USB_SEND);
this.ep_halt(1, USB_RECV);
// invalid_cbw = 1;
} else if UmsState::DataPhase == this.ms_state {
crate::println!("data");
crate::println_d!("data");
//DATA
if let Some((write_offset, len)) = this.callback_wr.take() {
let app_buf = conjure_app_buf();
@ -266,10 +266,10 @@ pub fn usb_ep1_bulk_out_complete(
csw.send(this);
}
} else {
crate::println!("Data completion reached without destination for data copy! data dropped.");
crate::println_d!("Data completion reached without destination for data copy! data dropped.");
}
} else {
crate::println!("uhhh wtf");
crate::println_d!("uhhh wtf");
}
}
@ -280,7 +280,7 @@ pub fn usb_ep1_bulk_in_complete(
_error: u8,
_residual: u16,
) {
// crate::println!("bulk IN handler");
// crate::println_d!("bulk IN handler");
let length = info & 0xFFFF;
if UmsState::DataPhase == this.ms_state {
//DATA
@ -308,7 +308,7 @@ pub fn usb_ep3_bulk_out_complete(
_error: u8,
residual: u16,
) {
// crate::println!("EP3 OUT: {:x} {:x}", info, _error);
// crate::println_d!("EP3 OUT: {:x} {:x}", info, _error);
let actual = CRG_UDC_APP_BUF_LEN - residual as usize;
@ -320,7 +320,7 @@ pub fn usb_ep3_bulk_out_complete(
let buf = unsafe { core::slice::from_raw_parts(buf_addr as *const u8, actual as usize) };
// For now: just print, or push into a ring buffer for your "virtual terminal"
// crate::println!("CDC OUT received {} bytes: {:?}", actual, &buf);
// crate::println_d!("CDC OUT received {} bytes: {:?}", actual, &buf);
critical_section::with(|cs| {
let mut queue = crate::USB_RX.borrow(cs).borrow_mut();
@ -386,9 +386,9 @@ pub fn usb_ep3_bulk_in_complete(
_error: u8,
_residual: u16,
) {
// crate::println!("EP3 IN");
// let length = CRG_UDC_APP_BUF_LEN - residual as usize;
// crate::println!("CDC IN transfer complete, {} bytes sent", length);
// crate::println_d!("EP3 IN");
// let length = CRG_UDC_APP_BUF_LEN - _residual as usize;
// crate::println_d!("CDC IN transfer complete, {} bytes sent", length);
// signal that more stuff can be put into the pipe
TX_IDLE.store(true, Ordering::SeqCst);
@ -405,9 +405,9 @@ pub fn usb_ep2_int_in_complete(
_error: u8,
_residual: u16,
) {
// crate::println!("EP2 INT");
// crate::println_d!("EP2 INT");
// let length = CRG_UDC_APP_BUF_LEN - residual as usize;
// crate::println!("CDC notification sent, {} bytes", length);
// crate::println_d!("CDC notification sent, {} bytes", length);
// Typically sends SERIAL_STATE bitmap (carrier detect etc).
// Ignoring - this is a virtual terminal
@ -489,7 +489,7 @@ fn process_request_sense(this: &mut CorigineUsb, cbw: Cbw) {
csw.residue = 0;
csw.status = 0;
csw.send(this);
// crate::println!("UMS_STATE_STATUS_PHASE\r\n");
// crate::println_d!("UMS_STATE_STATUS_PHASE\r\n");
} else if cbw.flags & 0x80 != 0 {
if cbw.data_transfer_length < 18 {
let ep1_in = unsafe { core::slice::from_raw_parts_mut(EP1_IN_BUF as *mut u8, EP1_IN_BUF_LEN) };
@ -559,7 +559,7 @@ fn process_prevent_allow_medium_removal(this: &mut CorigineUsb, _cbw: Cbw) {
}
fn process_report_capacity(this: &mut CorigineUsb, cbw: Cbw) {
crate::println!("REPORT CAPACITY");
crate::println_d!("REPORT CAPACITY");
let mut csw = Csw::derive();
let rc_lba = RAMDISK_LEN / SECTOR_SIZE as usize - 1;
let rc_bl: u32 = SECTOR_SIZE as u32;
@ -633,7 +633,7 @@ fn process_read_command(this: &mut CorigineUsb, cbw: Cbw) {
this.ms_state = UmsState::DataPhase;
return;
}
crate::println!(
crate::println_d!(
"DISK READ address = 0x{:x}, length = 0x{:x}",
RAMDISK_ADDRESS + lba as usize * SECTOR_SIZE as usize,
length
@ -685,7 +685,7 @@ fn process_write_command(this: &mut CorigineUsb, cbw: Cbw) {
return;
}
crate::println!(
crate::println_d!(
"Write address = 0x{:x}, length = 0x{:x}",
RAMDISK_ADDRESS + lba as usize * SECTOR_SIZE as usize,
length
@ -734,7 +734,7 @@ fn process_write12_command(this: &mut CorigineUsb, cbw: Cbw) {
length |= (cbw.cdb[9] as u32) << 0;
length *= SECTOR_SIZE as u32;
crate::println!("write12 of {} bytes", length);
crate::println_d!("write12 of {} bytes", length);
if cbw.flags & 0x80 != 0 {
csw.residue = cbw.data_transfer_length;