add aclk unit test

This commit is contained in:
bunnie 2024-06-02 20:20:06 +08:00
parent a721c60d45
commit c4d787356b
2 changed files with 76 additions and 1 deletions

View file

@ -90,6 +90,7 @@ pub fn report_api(d: u32) {
pub fn bio_tests() {
report_api(crate::get_id());
units::aclk_tests();
i2c::i2c_test();
i2c::complex_i2c_test();
units::fifo_level_tests();
@ -115,7 +116,7 @@ pub fn bio_tests() {
// -[x] Stall on event - FIFO level test
// -[x] Host IRQ generation test - some combination with event tests above to confirm IRQ generation
// -[x] Core ID read test
// -[ ] Core aclk counter test
// -[x] Core aclk counter test
// Application tests:
// -[x] SPI loopback test - implement using extclk as spi clk for input
// -[x] I2C loopback test

View file

@ -699,3 +699,77 @@ pub fn fifo_level_tests() {
}
print!("===FIFO level comprehensive PASS===\r")
}
pub fn aclk_tests() {
print!("ACLK test\r");
// clear any prior test config state
let mut test_cfg = CSR::new(utra::main::HW_MAIN_BASE as *mut u32);
test_cfg.wo(utra::main::WDATA, 0);
let mut bio_ss = BioSharedState::new();
// stop all the machines, so that code can be loaded
bio_ss.bio.wo(utra::bio::SFR_CTRL, 0x0);
let code = aclk_code();
bio_ss.load_code(code, 0);
// configure & run the 0th machine
bio_ss.bio.wo(utra::bio::SFR_QDIV1, 0xA_0000);
// don't snap GPIO outputs
bio_ss.bio.wo(utra::bio::SFR_CONFIG, 0);
// start machine 1
bio_ss.bio.wo(utra::bio::SFR_CTRL, 0x222);
while bio_ss.bio.rf(utra::bio::SFR_FLEVEL_PCLK_REGFIFO_LEVEL1) < 7 {
print!("waiting {}\r", bio_ss.bio.rf(utra::bio::SFR_FLEVEL_PCLK_REGFIFO_LEVEL1));
// wait
}
let mut results = [0u32; 7];
for d in results.iter_mut() {
*d = bio_ss.bio.r(utra::bio::SFR_RXF1) & 0x3FFF_FFFF;
}
for (i, r) in results.iter().enumerate() {
print!("{}: {} cycles\r", i, r);
}
assert!(results[1] - results[0] == 3);
assert!(results[2] - results[1] == 3);
assert!(results[3] - results[2] == 6);
assert!(results[4] - results[3] == 3);
assert!(results[6] - results[5] == 10); // related to the clock divider
print!("===ACLK test PASS===\r");
}
#[rustfmt::skip]
bio_code!(aclk_code, ACLK_START, ACLK_END,
"j 90f",
"nop",
"j 91f",
"nop",
"j 92f",
"nop",
"j 93f",
"nop",
// mach 0 code
"90:",
"j 90b",
// mach 1 code
"91:",
"mv x17, x31",
"mv x17, x31",
"mv x17, x31",
"nop",
"mv x17, x31",
"mv x17, x31",
"mv x20, x0",
"mv x17, x31",
"mv x20, x0",
"mv x17, x31",
"40:",
"j 40b",
// mach 2 code
"92:",
"j 92b",
// mach 3 code
"93:",
"j 93b"
);