add baremetal routine to clear the PDDB for testing purposes

This commit is contained in:
bunnie 2025-11-11 08:43:50 +08:00
parent dd42267eb9
commit bf7a55640c

View file

@ -1128,6 +1128,64 @@ impl Repl {
))
);
}
#[cfg(feature = "board-baosec")]
"pddberase" => {
use bao1x_api::{baosec::PDDB_LEN, baosec::PDDB_ORIGIN};
use bao1x_hal::{
board::SPINOR_BULK_ERASE_SIZE,
ifram::IframRange,
iox::Iox,
udma::{Spim, *},
};
let perclk = 100_000_000;
let udma_global = GlobalConfig::new();
// setup the I/O pins
let iox = Iox::new(utralib::generated::HW_IOX_BASE as *mut u32);
let channel = bao1x_hal::board::setup_memory_pins(&iox);
udma_global.clock_on(PeriphId::from(channel));
// safety: this is safe because clocks have been set up
let mut flash_spim = unsafe {
Spim::new_with_ifram(
channel,
// has to be half the clock frequency reaching the block, but
// run it as fast
// as we can run perclk
perclk / 4,
perclk / 2,
SpimClkPol::LeadingEdgeRise,
SpimClkPha::CaptureOnLeading,
SpimCs::Cs0,
0,
0,
None,
256 + 16, /* just enough space to send commands + programming
* page */
4096,
Some(6),
Some(SpimMode::Standard), // guess Standard
IframRange::from_raw_parts(
bao1x_hal::board::SPIM_FLASH_IFRAM_ADDR,
bao1x_hal::board::SPIM_FLASH_IFRAM_ADDR,
4096 * 2,
),
)
};
flash_spim.identify_flash_reset_qpi();
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("flash ID (init): {:x}", flash_id);
flash_spim.mem_qpi_mode(true);
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("QPI flash ID: {:x}", flash_id);
crate::println!("Erasing from {:x}-{:x}...", PDDB_ORIGIN, PDDB_ORIGIN + PDDB_LEN);
for addr in (PDDB_ORIGIN..PDDB_ORIGIN + PDDB_LEN).step_by(SPINOR_BULK_ERASE_SIZE as usize) {
crate::println!(" {:x}...", addr);
flash_spim.flash_erase_block(addr, SPINOR_BULK_ERASE_SIZE as usize);
}
crate::println!("...done!");
}
"echo" => {
for word in args {
crate::print!("{} ", word);
@ -1144,7 +1202,7 @@ impl Repl {
#[cfg(feature = "bao1x-bio")]
crate::print!(", bio, bdma, pin");
#[cfg(all(feature = "bao1x", feature = "board-baosec"))]
crate::print!(", ldo, wfi");
crate::print!(", ldo, wfi, pdbberase");
#[cfg(feature = "bao1x-usb")]
crate::print!(", usb");
#[cfg(feature = "bao1x-trng")]