mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-20 09:03:28 +00:00
add 25MHz pwm output generator to the boot sequence
This commit is contained in:
parent
49484bb93d
commit
baa9380123
1 changed files with 16 additions and 27 deletions
|
|
@ -98,16 +98,10 @@ pub fn delay(quantum: usize) {
|
||||||
pub fn early_init() -> u32 {
|
pub fn early_init() -> u32 {
|
||||||
let daric_cgu = sysctrl::HW_SYSCTRL_BASE as *mut u32;
|
let daric_cgu = sysctrl::HW_SYSCTRL_BASE as *mut u32;
|
||||||
|
|
||||||
let ao_sysctrl = utra::ao_sysctrl::HW_AO_SYSCTRL_BASE as *mut u32;
|
let mut ao_sysctrl = CSR::new(utra::ao_sysctrl::HW_AO_SYSCTRL_BASE as *mut u32);
|
||||||
unsafe {
|
// clear any AO wakeup pending bits
|
||||||
// this turns off the VDD85D (doesn't work)
|
let fr = ao_sysctrl.r(utra::ao_sysctrl::SFR_AOFR);
|
||||||
// TODO: debug switching regulator power-on
|
ao_sysctrl.wo(utra::ao_sysctrl::SFR_AOFR, fr);
|
||||||
// ao_sysctrl.add(utra::ao_sysctrl::SFR_PMUCSR.offset()).write_volatile(0x6c);
|
|
||||||
|
|
||||||
// this sets VDD85D to 0.90V
|
|
||||||
ao_sysctrl.add(utra::ao_sysctrl::SFR_PMUTRM0CSR.offset()).write_volatile(0x0842_1FF1); // 0x0842_1080 default
|
|
||||||
daric_cgu.add(utra::sysctrl::SFR_IPCARIPFLOW.offset()).write_volatile(0x57);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Clear .data, .bss, .stack, .heap regions & setup .data values
|
// Clear .data, .bss, .stack, .heap regions & setup .data values
|
||||||
unsafe {
|
unsafe {
|
||||||
|
|
@ -434,12 +428,7 @@ pub fn early_init() -> u32 {
|
||||||
}
|
}
|
||||||
|
|
||||||
// TODO: move this into the camera routine. For now, just free-run the clock; burns a lot of power.
|
// TODO: move this into the camera routine. For now, just free-run the clock; burns a lot of power.
|
||||||
// Also, the clock is at 12.5MHz, we really want this at 25MHz but maybe it's just not possible?
|
|
||||||
/*
|
|
||||||
crate::println!("Setup PWM");
|
|
||||||
{
|
{
|
||||||
use cramium_api::*;
|
|
||||||
use cramium_hal::iox::Iox;
|
|
||||||
let iox = Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
|
let iox = Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
|
||||||
iox.setup_pin(IoxPort::PF, 9, Some(IoxDir::Input), Some(IoxFunction::Gpio), None, None, None, None);
|
iox.setup_pin(IoxPort::PF, 9, Some(IoxDir::Input), Some(IoxFunction::Gpio), None, None, None, None);
|
||||||
iox.setup_pin(
|
iox.setup_pin(
|
||||||
|
|
@ -449,14 +438,9 @@ pub fn early_init() -> u32 {
|
||||||
Some(IoxFunction::Gpio),
|
Some(IoxFunction::Gpio),
|
||||||
None,
|
None,
|
||||||
None,
|
None,
|
||||||
Some(IoxEnable::Enable),
|
Some(IoxEnable::Disable),
|
||||||
Some(IoxDriveStrength::Drive2mA),
|
Some(IoxDriveStrength::Drive8mA),
|
||||||
);
|
);
|
||||||
for _ in 0..8 {
|
|
||||||
iox.set_gpio_pin(IoxPort::PA, 0, IoxValue::Low);
|
|
||||||
iox.set_gpio_pin(IoxPort::PA, 0, IoxValue::High);
|
|
||||||
}
|
|
||||||
|
|
||||||
iox.setup_pin(
|
iox.setup_pin(
|
||||||
IoxPort::PA,
|
IoxPort::PA,
|
||||||
0,
|
0,
|
||||||
|
|
@ -464,25 +448,30 @@ pub fn early_init() -> u32 {
|
||||||
Some(IoxFunction::AF3),
|
Some(IoxFunction::AF3),
|
||||||
None,
|
None,
|
||||||
None,
|
None,
|
||||||
Some(IoxEnable::Enable),
|
Some(IoxEnable::Disable),
|
||||||
Some(IoxDriveStrength::Drive2mA),
|
Some(IoxDriveStrength::Drive8mA),
|
||||||
);
|
);
|
||||||
let mut timer = CSR::new(utra::pwm::HW_PWM_BASE as *mut u32);
|
let mut timer = CSR::new(utra::pwm::HW_PWM_BASE as *mut u32);
|
||||||
timer.wo(utra::pwm::REG_CH_EN, 1);
|
timer.wo(utra::pwm::REG_CH_EN, 1);
|
||||||
timer.rmwf(utra::pwm::REG_TIM0_CFG_R_TIMER0_SAW, 0);
|
timer.rmwf(utra::pwm::REG_TIM0_CFG_R_TIMER0_SAW, 1);
|
||||||
timer.rmwf(utra::pwm::REG_TIM0_CH0_TH_R_TIMER0_CH0_TH, 0);
|
timer.rmwf(utra::pwm::REG_TIM0_CH0_TH_R_TIMER0_CH0_TH, 0);
|
||||||
timer.rmwf(utra::pwm::REG_TIM0_CH0_TH_R_TIMER0_CH0_MODE, 3);
|
timer.rmwf(utra::pwm::REG_TIM0_CH0_TH_R_TIMER0_CH0_MODE, 3);
|
||||||
let pwm = utra::pwm::HW_PWM_BASE as *mut u32;
|
let pwm = utra::pwm::HW_PWM_BASE as *mut u32;
|
||||||
unsafe { pwm.add(2).write_volatile(1 << 16) };
|
// unsafe { pwm.add(2).write_volatile(1 << 16) };
|
||||||
|
unsafe { pwm.add(2).write_volatile(0) };
|
||||||
timer.rmwf(utra::pwm::REG_TIM0_CMD_R_TIMER0_START, 1);
|
timer.rmwf(utra::pwm::REG_TIM0_CMD_R_TIMER0_START, 1);
|
||||||
crate::println!("PWM running on PA0?");
|
crate::println!("PWM running on PA0?");
|
||||||
for i in 0..12 {
|
for i in 0..12 {
|
||||||
crate::println!("0x{:2x}: 0x{:08x}", i, unsafe { pwm.add(i).read_volatile() })
|
crate::println!("0x{:2x}: 0x{:08x}", i, unsafe { pwm.add(i).read_volatile() })
|
||||||
}
|
}
|
||||||
crate::println!("0x{:2x}: 0x{:08x}", 65, unsafe { pwm.add(65).read_volatile() });
|
crate::println!("0x{:2x}: 0x{:08x}", 65, unsafe { pwm.add(65).read_volatile() });
|
||||||
|
/*
|
||||||
|
for i in 80..84 {
|
||||||
|
crate::println!("0x{:2x}: 0x{:08x}", i, unsafe { pwm.add(i).read_volatile() })
|
||||||
|
}
|
||||||
|
*/
|
||||||
crate::println!("");
|
crate::println!("");
|
||||||
}
|
}
|
||||||
*/
|
|
||||||
|
|
||||||
#[cfg(feature = "board-bringup")]
|
#[cfg(feature = "board-bringup")]
|
||||||
let iox_loop = iox.clone();
|
let iox_loop = iox.clone();
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue