From b87c9f76721fee375c2e9de3a7dbb4f49fd58a26 Mon Sep 17 00:00:00 2001 From: bunnie Date: Sun, 6 Oct 2024 02:45:18 +0800 Subject: [PATCH] add I2C tests & code for setting the LDO initial value --- loader/src/platform/cramium/cramium.rs | 60 +++++++++++++++++++++++++- 1 file changed, 58 insertions(+), 2 deletions(-) diff --git a/loader/src/platform/cramium/cramium.rs b/loader/src/platform/cramium/cramium.rs index 4e96036bc..d8a49981e 100644 --- a/loader/src/platform/cramium/cramium.rs +++ b/loader/src/platform/cramium/cramium.rs @@ -1,5 +1,7 @@ use cramium_hal::iox::{Iox, IoxDir, IoxEnable, IoxFunction, IoxPort}; use cramium_hal::udma; +use cramium_hal::udma::PeriphId; +use cramium_hal::udma::UdmaGlobalConfig; use utralib::generated::*; // Notes about the reset vector location @@ -50,8 +52,8 @@ use utralib::generated::*; /* To-do: -[x] Add dummy lifecycle gate call - -[ ] New OLED base driver - -[ ] I2C driver for AXP2101 + -[x] New OLED base driver + -[x] I2C driver (axp2101 default setting as first item of use) -[ ] camera base driver (maybe loopback to OLED as demo?) -[ ] USB stack into loader; debugging there. Present as bulk transfer to emulated disk on PSRAM using ghostFS @@ -248,6 +250,23 @@ pub fn early_init() -> u32 { glbl_csr.wo(utra::sce_glbsfr::SFR_FFEN, 0x30); glbl_csr.wo(utra::sce_glbsfr::SFR_FFCLR, 0xff05); + // configure LDO voltages that aren't correct by default. + let i2c_channel = cramium_hal::board::setup_i2c_pins(&iox); + udma_global.clock(PeriphId::from(i2c_channel), true); + let i2c_ifram = unsafe { + cramium_hal::ifram::IframRange::from_raw_parts( + cramium_hal::board::I2C_IFRAM_ADDR, + cramium_hal::board::I2C_IFRAM_ADDR, + 4096, + ) + }; + let mut i2c = unsafe { cramium_hal::udma::I2c::new_with_ifram(i2c_channel, 100_000, perclk, i2c_ifram) }; + let ldo_adjusted = [0x57, 0x00, 0x0d, 0x14, 0x1c, 0x18, 0x0d, 0x17, 0x08, 0x00, 0x0e]; + i2c.i2c_write_async(cramium_hal::board::I2C_AXP2101_ADR, 0x90, &ldo_adjusted).unwrap(); + i2c.i2c_await(None, false).unwrap(); + crate::println!("AXP2101 LDOs configured"); + + // show the boot logo crate::platform::cramium::bootlogo::show_logo(freq, &mut udma_global, &mut iox); // Board bring-up: send characters to confirm the UART is configured & ready to go for the logging crate! @@ -255,6 +274,43 @@ pub fn early_init() -> u32 { // makes things a little bit cleaner for JTAG ops, it seems. #[cfg(feature = "board-bringup")] { + // test I2C + crate::println!("i2c test"); + let mut id = [0u8; 8]; + crate::println!("read USB ID"); + i2c.i2c_read_async(0x47, 0, id.len(), false).expect("couldn't initiate read"); + // this let is necessary to get `id` to go out of scope + i2c.i2c_await(Some(&mut id), false).unwrap(); + crate::println!("ID result: {:x?}", id); + + let mut ldo = [0u8; 11]; + crate::println!("AXP2101 LDO"); + i2c.i2c_read_async(0x34, 0x90, ldo.len(), false).expect("couldn't initiate read"); + i2c.i2c_await(Some(&mut ldo), false).unwrap(); + crate::println!("LDO result: {:x?}", ldo); + + crate::println!("write1"); + ldo[10] = 0xd; + i2c.i2c_write_async(0x34, 0x90, &ldo).expect("couldn't initiate write"); + i2c.i2c_await(None, false).unwrap(); + ldo.fill(0); + + crate::println!("AXP2101 LDO - last value should be 0xd"); + i2c.i2c_read_async(0x34, 0x90, ldo.len(), false).expect("couldn't initiate read"); + i2c.i2c_await(Some(&mut ldo), false).unwrap(); + crate::println!("LDO result - last value should be 0xd: {:x?}", ldo); + + crate::println!("write2"); + ldo[10] = 0xe; + i2c.i2c_write_async(0x34, 0x90, &ldo).expect("couldn't initiate write"); + i2c.i2c_await(None, false).unwrap(); + ldo.fill(0); + + crate::println!("AXP2101 LDO - last value should be 0xe"); + i2c.i2c_read_async(0x34, 0x90, ldo.len(), false).expect("couldn't initiate read"); + i2c.i2c_await(Some(&mut ldo), false).unwrap(); + crate::println!("LDO result - last value should be 0xe: {:x?}", ldo); + // configure the SCE clocks to enable the TRNG let mut sce = CSR::new(HW_SCE_GLBSFR_BASE as *mut u32); sce.wo(utra::sce_glbsfr::SFR_SUBEN, 0xFF);