move camera clock pin setup into the camera driver in Xous.

previously this was setup in the loader, which is a bit of an
abstraction bodge.
This commit is contained in:
bunnie 2025-10-01 15:00:40 +08:00
parent 483e8f3508
commit b86664d279

View file

@ -191,6 +191,51 @@ pub fn wrapped_main(main_thread_token: MainThreadToken) -> ! {
// ---- camera initialization
#[cfg(not(feature = "hosted-baosec"))]
{
// setup camera clock
iox.setup_pin(IoxPort::PF, 9, Some(IoxDir::Input), Some(IoxFunction::Gpio), None, None, None, None);
iox.setup_pin(
IoxPort::PA,
0,
Some(IoxDir::Output),
Some(IoxFunction::Gpio),
None,
None,
Some(IoxEnable::Disable),
Some(IoxDriveStrength::Drive8mA),
);
iox.setup_pin(
IoxPort::PA,
0,
Some(IoxDir::Output),
Some(IoxFunction::AF3),
None,
None,
Some(IoxEnable::Disable),
Some(IoxDriveStrength::Drive8mA),
);
let timer_range = xous::map_memory(
xous::MemoryAddress::new(utra::pwm::HW_PWM_BASE),
None,
4096,
xous::MemoryFlags::R | xous::MemoryFlags::W,
)
.expect("couldn't map PWM range");
let mut timer = utralib::CSR::new(timer_range.as_ptr() as usize as *mut u32);
timer.wo(utra::pwm::REG_CH_EN, 1);
timer.rmwf(utra::pwm::REG_TIM0_CFG_R_TIMER0_SAW, 1);
timer.rmwf(utra::pwm::REG_TIM0_CH0_TH_R_TIMER0_CH0_TH, 0);
timer.rmwf(utra::pwm::REG_TIM0_CH0_TH_R_TIMER0_CH0_MODE, 3);
let pwm = timer_range.as_mut_ptr() as *mut u32;
unsafe { pwm.add(2).write_volatile(0) }; // for some reason the register extraction didn't get this register...
timer.rmwf(utra::pwm::REG_TIM0_CMD_R_TIMER0_START, 1);
log::info!("PWM running on PA0");
/* // register debug
for i in 0..12 {
println!("0x{:2x}: 0x{:08x}", i, unsafe { pwm.add(i).read_volatile() })
}
println!("0x{:2x}: 0x{:08x}", 65, unsafe { pwm.add(65).read_volatile() });
*/
// setup camera pins
let (cam_pdwn_bnk, cam_pdwn_pin) = bao1x_hal::board::setup_camera_pins(&iox);
// disable camera powerdown