working square wave and pinup with nto bgas

This commit is contained in:
Sam Chin 2025-08-11 17:52:25 +08:00
parent ca9e4e65bb
commit b32fa12da8

View file

@ -460,6 +460,154 @@ impl Repl {
} }
} }
} }
#[cfg(feature = "nto-bio")]
"capsense" => {
{
if args.len() != 2 {
crate::println!("Usage: capsense <pin> <on|off>");
self.do_cmd = false;
self.cmdline.clear();
return;
}
let pin = match u32::from_str_radix(&args[0], 10) {
Ok(p) if p < 32 => p,
_ => {
crate::println!("Invalid pin number. Must be 0-31.");
self.do_cmd = false;
self.cmdline.clear();
return;
}
};
let state = args[1].as_str();
if state != "on" && state != "off" {
crate::println!("Invalid state. Use 'on' or 'off'.");
self.do_cmd = false;
self.cmdline.clear();
return;
}
let mut bio_ss = BioSharedState::new();
let mut ctrl = bio_ss.bio.r(utra::bio_bdma::SFR_CTRL);
let iox = cramium_hal::iox::Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
// Set the ports as bio ports
iox.set_ports_from_pio_bitmask(0xFFFF_FFFF);
if state == "on" {
// Stop Core 0 to ensure a clean state before loading new code.
ctrl &= !0b0001;
bio_ss.bio.wo(utra::bio_bdma::SFR_CTRL, ctrl);
// Clear the FIFO for Core 0 to remove any stale data.
bio_ss.bio.wo(utra::bio_bdma::SFR_FIFO_CLR, 0b0001);
// Load the slow wave generator program.
let prog = slow_wave_generator_code();
bio_ss.load_code(prog, 0, BioCore::Core0);
// Start Core 0.
ctrl |= 0b0001_0001_0001;
bio_ss.bio.wo(utra::bio_bdma::SFR_CTRL, ctrl);
// Set clock divider for a slow 1kHz BIO clock.
// Divisor = 40,000,000 / 1,000 = 40,000 (0x9C40)
// bio_ss.bio.wo(utra::bio_bdma::SFR_QDIV0, 0x9C40_0000);
// Set clock divider for a 25kHz BIO clock.
// bio_ss.bio.wo(utra::bio_bdma::SFR_QDIV0, 0x6400000);
// Set clock divider for a 32250kHz BIO clock.
bio_ss.bio.wo(utra::bio_bdma::SFR_QDIV0, 0x5000000);
// Send parameters to the BIO core via FIFO0.
let pin_mask = 1 << pin;
// For a 2-second half-period with a 1ms (1kHz) clock, we need 2000 counts.
let delay_count = 2000;
bio_ss.bio.wo(utra::bio_bdma::SFR_TXF0, pin_mask);
bio_ss.bio.wo(utra::bio_bdma::SFR_TXF0, delay_count);
crate::println!("Generating ~0.25 Hz (4 second period) wave on pin {}.", pin);
} else {
// Stop Core 0.
ctrl &= !0b0001;
bio_ss.bio.wo(utra::bio_bdma::SFR_CTRL, ctrl);
crate::println!("Stopped wave generator on Core 0.");
}
}
}
#[cfg(feature = "nto-bio")]
"pinup" => {
{
if args.len() != 2 {
crate::println!("Usage: pinup <pin> <on|off>");
self.do_cmd = false;
self.cmdline.clear();
return;
}
let pin = match u32::from_str_radix(&args[0], 10) {
Ok(p) if p < 32 => p,
_ => {
crate::println!("Invalid pin number. Must be 0-31.");
self.do_cmd = false;
self.cmdline.clear();
return;
}
};
let state = args[1].as_str();
if state != "on" && state != "off" {
crate::println!("Invalid state. Use 'on' or 'off'.");
self.do_cmd = false;
self.cmdline.clear();
return;
}
let mut bio_ss = BioSharedState::new();
let iox = cramium_hal::iox::Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
iox.set_ports_from_pio_bitmask(0xFFFF_FFFF);
crate::println!("Configuring BIO Core 0 for GPIO control...");
// 1. Stop Core 0 to ensure a clean state
let mut ctrl = bio_ss.bio.r(utra::bio_bdma::SFR_CTRL);
ctrl &= !0b0001;
bio_ss.bio.wo(utra::bio_bdma::SFR_CTRL, ctrl);
// 2. Clear any stale data from the FIFO
bio_ss.bio.wo(utra::bio_bdma::SFR_FIFO_CLR, 0b0001);
// 3. Load the correct program
let prog = pin_control_code();
bio_ss.load_code(prog, 0, BioCore::Core0);
// 5. Start the core
ctrl |= 0b0001_0001_0001; //enable all the cores
bio_ss.bio.wo(utra::bio_bdma::SFR_CTRL, ctrl);
crate::println!("Core 0 is ready.");
// 4. Reset the clock divider to a default (e.g., full speed) A value of 0 might mean full
// speed, or a small value like 1. This prevents capsense's slow clock from affecting
// pinup.
bio_ss.bio.wo(utra::bio_bdma::SFR_QDIV0, 0);
// Prepare and send the command to the now-ready core
let pin_mask = 1 << pin;
let state_val = if state == "on" { 0xFFFFFFFF } else { 0 }; // Use all 1s for "on"
bio_ss.bio.wo(utra::bio_bdma::SFR_TXF0, pin_mask);
bio_ss.bio.wo(utra::bio_bdma::SFR_TXF0, state_val);
crate::println!("Command sent: Pin {} -> {}.", pin, state.to_uppercase());
}
}
"echo" => { "echo" => {
for word in args { for word in args {
crate::print!("{} ", word); crate::print!("{} ", word);
@ -475,6 +623,8 @@ impl Repl {
crate::print!(", mon"); crate::print!(", mon");
#[cfg(feature = "nto-bio")] #[cfg(feature = "nto-bio")]
crate::print!(", bio"); crate::print!(", bio");
#[cfg(feature = "nto-bio")]
crate::print!(", pinup, capsense");
crate::println!(""); crate::println!("");
} }
} }
@ -491,6 +641,91 @@ impl Repl {
} }
} }
#[rustfmt::skip]
bio_code!(slow_wave_generator_code, SLOW_WAVE_START, SLOW_WAVE_END,
// Configure all GPIOs as outputs.
"li t0, 0xFFFFFFFF",
"mv x24, t0",
// Read the pin mask from FIFO0 into t1.
"mv t1, x16",
// Read the delay count from FIFO0 into t2.
"mv t2, x16",
// Set the GPIO mask register to the pin mask.
"mv x26, t1",
"10:", // Main loop
// --- HIGH PULSE ---
"mv x21, t1", // Set pin high
"mv t3, t2", // Load counter into t3 for the delay loop
"11:", // Delay loop 1
"mv x20, zero", // << Wait for one (slow) BIO clock cycle
"addi t3, t3, -1", // Decrement counter
"bne t3, zero, 11b", // Loop if not zero
// --- LOW PULSE ---
"mv x21, zero", // Set pin low
"mv t3, t2", // Re-load counter for the delay loop
"12:", // Delay loop 2
"mv x20, zero", // << Wait for one (slow) BIO clock cycle
"addi t3, t3, -1", // Decrement counter
"bne t3, zero, 12b", // Loop if not zero
"j 10b" // Repeat the whole cycle
);
#[rustfmt::skip]
bio_code!(pin_control_code, PIN_CONTROL_START, PIN_CONTROL_END,
// Configure all GPIOs as outputs once at the start.
"li t0, 0xFFFFFFFF",
"mv x24, t0",
"wait_for_cmd:",
// Read the pin mask from FIFO0 (x16). The core will stall here until the CPU sends data.
"mv t1, x16",
// Read the desired state (1 for high, 0 for low) from FIFO0. Stalls again.
"mv t2, x16",
// Set the GPIO mask register (x26) to the pin mask we just received.
"mv x26, t1",
// Set the GPIO output register (x21) to the state (high/low) we received.
"mv x21, t2",
// Loop back to wait for the next command.
"j wait_for_cmd"
);
#[rustfmt::skip]
bio_code!(pin_read_write_code, PIN_RW_START, PIN_RW_END,
// This program waits for three words from the CPU:
// 1. Write Pin Mask (the pin to set as output)
// 2. State Value (0 for LOW, 0xFFFFFFFF for HIGH)
// 3. Read Pin Mask (the pin to read from)
// It then performs the write, reads the input pin,
// and sends the result (0 or non-zero) back to the CPU.
"wait_for_cmd:",
// --- Receive parameters from the CPU ---
"mv t1, x16", // t1 = Write Pin Mask
"mv t2, x16", // t2 = State Value
"mv t3, x16", // t3 = Read Pin Mask
// --- Configure Pin Directions ---
// Set the write pin as an OUTPUT (bit = 1) and all others as INPUT (bit = 0).
"mv x24, t1",
// --- Perform the Write Operation ---
// Set the GPIO mask register to the write pin.
"mv x26, t1",
// Set the output register to the desired state.
"mv x21, t2",
// --- Perform the Read Operation ---
// Read the state of all input pins into t4.
"mv t4, x25",
// Isolate the bit for the specific pin we want to read.
"and t5, t4, t3", // t5 = (value of all pins) & (read pin mask)
// --- Send Result Back to CPU ---
// Write the result (t5) to the transmit FIFO (x17).
// The CPU will read this value.
"mv x17, t5",
// Loop back to wait for the next command.
"j wait_for_cmd"
);
#[rustfmt::skip] #[rustfmt::skip]
bio_code!(simple_test_code, SIMPLE_TEST_START, SIMPLE_TEST_END, bio_code!(simple_test_code, SIMPLE_TEST_START, SIMPLE_TEST_END,
"li sp, 0x800", "li sp, 0x800",