add some debug info for spurious irqs

This commit is contained in:
bunnie 2025-09-13 16:18:15 +08:00
parent a077e9c617
commit b0d2a18122

View file

@ -458,36 +458,50 @@ fn main() {
}
}
HalOpcode::IrqLocalHandler => {
// Figure out which port(s) caused the IRQ
let irq_flag = iox.csr.r(utralib::utra::iox::SFR_INTFR);
// clear the set bit by writing it back
iox.csr.wo(utralib::utra::iox::SFR_INTFR, irq_flag);
let mut found = false;
for bitpos in 0..8 {
// the bit position is flipped versus register order in memory
if ((irq_flag << (bitpos as u32)) & 0x80) != 0 {
if let Some(local_reg) = irq_table[bitpos] {
found = true;
// interrupts are "Best effort" and can gracefully fail if the receiver has been
// overwhelmed by too many interrupts
xous::try_send_message(
local_reg.cid,
xous::Message::new_scalar(local_reg.opcode, 0, 0, 0, 0),
)
.ok();
} else {
log::warn!(
"Got IRQ on position {} but no registration was found, ignoring!",
bitpos
);
if let Some(scalar) = msg.body.scalar_message() {
// Figure out which port(s) caused the IRQ
let irq_flag = iox.csr.r(utralib::utra::iox::SFR_INTFR);
// clear the set bit by writing it back
iox.csr.wo(utralib::utra::iox::SFR_INTFR, irq_flag);
let mut found = false;
for bitpos in 0..8 {
// the bit position is flipped versus register order in memory
if ((irq_flag << (bitpos as u32)) & 0x80) != 0 {
if let Some(local_reg) = irq_table[bitpos] {
found = true;
// interrupts are "Best effort" and can gracefully fail if the receiver has
// been overwhelmed by too many interrupts
xous::try_send_message(
local_reg.cid,
xous::Message::new_scalar(local_reg.opcode, 0, 0, 0, 0),
)
.ok();
} else {
log::warn!(
"Got IRQ on position {} but no registration was found, ignoring!",
bitpos
);
}
}
}
if !found {
if irq_flag != 0 {
log::warn!(
"No handler was found for raw flag: {:x} (note bit order is reversed)",
irq_flag
);
} else {
log::info!("Interrupt received but maybe not for us? pending {:x}", scalar.arg1);
log::info!("CR0 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT0));
log::info!("CR1 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT1));
log::info!("CR2 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT2));
log::info!("CR3 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT3));
log::info!("CR4 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT4));
log::info!("CR5 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT5));
log::info!("CR6 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT6));
log::info!("CR7 {:x}", iox.csr.r(utralib::utra::iox::SFR_INTCR_CRINT7));
}
}
}
if !found {
log::warn!(
"No handler was found for raw flag: {:x} (note bit order is reversed)",
irq_flag
);
}
}
HalOpcode::SetGpioBank => {