fix ECC status register clearing

have to write the WREN register first!
This commit is contained in:
bunnie 2023-02-15 22:55:57 +08:00
parent 9444b68818
commit a63993963b

View file

@ -248,12 +248,33 @@ mod implementation {
failaddr2[2] = flash_rdcr2(&mut spinor.csr, 0x04000E00) as u8;
failaddr2[3] = flash_rdcr2(&mut spinor.csr, 0x04000F00) as u8;
// write 0 into the register to clear it
// enable writes: set wren mode. required to unlock wrcr2
loop {
flash_wren(&mut spinor.csr);
let status = flash_rdsr(&mut spinor.csr, 1);
if status & 0x02 != 0 {
break;
}
}
// write 0 into the ECC register to clear the lower die
spinor.csr.wfo(utra::spinor::WDATA_WDATA, 0);
flash_wrcr2(&mut spinor.csr, 0x800);
flash_wrcr2(&mut spinor.csr, 0x800); // this command auto-clears WREN
// enable writes again: set wren mode, as it was cleared by the completion of wrcr2
loop {
flash_wren(&mut spinor.csr);
let status = flash_rdsr(&mut spinor.csr, 1);
if status & 0x02 != 0 {
break;
}
}
// write 0 into the ECC register to clear the upper die
spinor.csr.wfo(utra::spinor::WDATA_WDATA, 0);
flash_wrcr2(&mut spinor.csr, 0x0400_0800);
flash_rdsr(&mut spinor.csr, 0); // dummy read to clear the "read lock" bit
xous::try_send_message(spinor.handler_conn,
xous::Message::new_scalar(Opcode::EccError.to_usize().unwrap(),
spinor.csr.rf(utra::spinor::ECC_ADDRESS_ECC_ADDRESS) as usize,