mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-15 08:30:02 +00:00
add some comments to explain where the code is currently at
This commit is contained in:
parent
5d3e0eba6c
commit
a5eab45a86
1 changed files with 19 additions and 5 deletions
|
|
@ -10,15 +10,13 @@ use utralib::*;
|
|||
use xous_bio_bdma::*;
|
||||
|
||||
/// Entrypoint
|
||||
/// This makes the program self-sufficient by setting up memory page assignment
|
||||
/// and copying the arguments to RAM.
|
||||
/// Assume the bootloader has already set up the stack to point to the end of RAM.
|
||||
///
|
||||
/// # Safety
|
||||
///
|
||||
/// This function is safe to call exactly once.
|
||||
#[export_name = "rust_entry"]
|
||||
pub unsafe extern "C" fn rust_entry() -> ! {
|
||||
// Initialize the timer, which is needed by the delay() function.
|
||||
let mut timer = CSR::new(utra::timer0::HW_TIMER0_BASE as *mut u32);
|
||||
const SYSTEM_CLOCK_FREQUENCY: u32 = 40_000_000;
|
||||
const SYSTEM_TICK_INTERVAL_MS: u32 = 1;
|
||||
|
|
@ -30,11 +28,17 @@ pub unsafe extern "C" fn rust_entry() -> ! {
|
|||
// enable the timer
|
||||
timer.wfo(utra::timer0::EN_EN, 0b1);
|
||||
|
||||
let mut count = 0;
|
||||
let mut rgb = CSR::new(utra::rgb::HW_RGB_BASE as *mut u32);
|
||||
// select a BIO test to run
|
||||
fifo_basic();
|
||||
// hello_world();
|
||||
|
||||
let bio_ss = BioSharedState::new();
|
||||
// The green LEDs flash whenever the FPGA is configured with the Arty BIO design.
|
||||
// The RGB LEDs flash when the CPU is running this code.
|
||||
let mut count = 0;
|
||||
let mut rgb = CSR::new(utra::rgb::HW_RGB_BASE as *mut u32);
|
||||
// provide some feedback on the run state of the BIO by peeking at the program counter
|
||||
// value, and provide feedback on the CPU operation by flashing the RGB LEDs.
|
||||
loop {
|
||||
crate::println!(
|
||||
"pc: {:04x} {:04x} {:04x} {:04x}",
|
||||
|
|
@ -60,6 +64,7 @@ mod panic_handler {
|
|||
}
|
||||
}
|
||||
|
||||
/// Delay function that delays a given number of milliseconds.
|
||||
pub fn delay(ms: usize) {
|
||||
let mut timer = CSR::new(utra::timer0::HW_TIMER0_BASE as *mut u32);
|
||||
timer.wfo(utra::timer0::EV_PENDING_ZERO, 1);
|
||||
|
|
@ -131,6 +136,15 @@ pub fn fifo_basic() -> usize {
|
|||
bio_ss.load_code(fifo_basic2_code(), 0, BioCore::Core2);
|
||||
bio_ss.load_code(fifo_basic3_code(), 0, BioCore::Core3);
|
||||
|
||||
// The code readback is broken on the Arty BIO target due to a pipeline stage
|
||||
// in the code readback path that causes the previous read's data to show up
|
||||
// on the current read access. On the NTO-BIO (full chip version), the BIO runs
|
||||
// at a much higher speed than the bus framework and thus the data is returned
|
||||
// on time for the read. However in the FPGA for simplicity the BIO is geared
|
||||
// at 2:1 BIO speed to CPU core speed, and the bus fabric runs at a single speed
|
||||
// with no CDCs and also a fully OSS AXI to AHB bridge that I think could also
|
||||
// be contributing to this bug.
|
||||
|
||||
/*
|
||||
// expect no error
|
||||
match bio_ss.verify_code(&fifo_basic0_code(), 0, BioCore::Core0) {
|
||||
|
|
|
|||
Loading…
Reference in a new issue