update precursors to the latest pre-build

This commit is contained in:
bunnie 2021-06-21 19:22:44 +08:00
parent 7ea45b8e5b
commit 9647559d25
2 changed files with 26 additions and 8 deletions

View file

@ -3,7 +3,7 @@
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="CMSIS-SVD.xsd" >
<vendor>litex</vendor>
<name>SOC</name>
<description><![CDATA[Litex SoC 2021-06-11 15:52:54]]></description>
<description><![CDATA[Litex SoC 2021-06-21 19:10:58]]></description>
<addressUnitBits>8</addressUnitBits>
<width>32</width>
@ -1222,10 +1222,10 @@ register to disable individual events.]]></description>
<register>
<name>GIT_GITREV</name>
<description><![CDATA[First 32-bits of the git revision. This documentation was built from git rev
``92629e91``, so this value is 2455936657, which should be enough to check out
``efa48933``, so this value is 4020537651, which should be enough to check out
the exact git version used to build this firmware.]]></description>
<addressOffset>0x0014</addressOffset>
<resetValue>0x92629e91</resetValue>
<resetValue>0xefa48933</resetValue>
<size>32</size>
<fields>
<field>
@ -1242,7 +1242,7 @@ the exact git version used to build this firmware.]]></description>
is ``1``, then the repository this was built from has one additional commit
beyond the tag indicated in `MAJOR`, `MINOR`, and `REVISION`.]]></description>
<addressOffset>0x0018</addressOffset>
<resetValue>0x16</resetValue>
<resetValue>0x1d</resetValue>
<size>32</size>
<fields>
<field>
@ -3451,7 +3451,7 @@ inject too fast.]]></description>
<name>SEED1</name>
<description><![CDATA[Bits 32-63 of `SEED_SEED`. Seed used for the build]]></description>
<addressOffset>0x0000</addressOffset>
<resetValue>0x24a0246f</resetValue>
<resetValue>0x33e603a3</resetValue>
<size>32</size>
<fields>
<field>
@ -3466,7 +3466,7 @@ inject too fast.]]></description>
<name>SEED0</name>
<description><![CDATA[Bits 0-31 of `SEED_SEED`.]]></description>
<addressOffset>0x0004</addressOffset>
<resetValue>0x43f81cb4</resetValue>
<resetValue>0xf1d9b09</resetValue>
<size>32</size>
<fields>
<field>
@ -6417,7 +6417,17 @@ microcode instructions starting at mpstart]]></description>
<bitRange>[0:0]</bitRange>
<lsb>0</lsb>
<description><![CDATA[Writing `1` turns on the clocks to this block, `0` stops the clocks (for power
savings)]]></description>
savings). The handling of the clock gate is in a different module, this is just
a flag to that block.]]></description>
</field>
<field>
<name>pause_req</name>
<msb>1</msb>
<bitRange>[1:1]</bitRange>
<lsb>1</lsb>
<description><![CDATA[Writing a `1` to this block will pause execution at the next micro-op, and allow
for read-out of data from RF/microcode. Must check pause_gnt to confirm the
pause has happened. Used to interrupt flow for suspend/resume.]]></description>
</field>
</fields>
</register>
@ -6442,6 +6452,14 @@ microcode memory areas will stall until this bit is clear]]></description>
<lsb>1</lsb>
<description><![CDATA[Current location of the microcode program counter. Mostly for debug.]]></description>
</field>
<field>
<name>pause_gnt</name>
<msb>11</msb>
<bitRange>[11:11]</bitRange>
<lsb>11</lsb>
<description><![CDATA[When set, the engine execution has been paused, and the RF & microcode ROM can
be read out for suspend/resume]]></description>
</field>
</fields>
</register>
<register>
@ -6919,7 +6937,7 @@ of the PLL]]></description>
<memoryRegion>
<name>ROM</name>
<baseAddress>0x00000000</baseAddress>
<size>0x00008000</size>
<size>0x0000000C</size>
</memoryRegion>
<memoryRegion>
<name>SRAM</name>

Binary file not shown.