add APIs to configure PMIC IRQs

This commit is contained in:
bunnie 2024-12-27 20:01:10 +08:00
parent b745307384
commit 86afe7ca0a

View file

@ -30,6 +30,38 @@ const REG_DLDO1_V: usize = 0x99;
#[allow(dead_code)]
const REG_DLDO2_V: usize = 0x9A;
const REG_IRQ_ENABLE0: u8 = 0x40;
const REG_IRQ_ENABLE1: u8 = 0x41;
const REG_IRQ_ENABLE2: u8 = 0x42;
const REG_IRQ_STATUS0: u8 = 0x48;
const REG_IRQ_STATUS1: u8 = 0x49;
const REG_IRQ_STATUS2: u8 = 0x4A;
const VBUS_INSERT_MASK: u8 = 0x80;
const VBUS_REMOVE_MASK: u8 = 0x40;
#[derive(PartialEq, Eq, Clone, Copy, Debug)]
pub enum VbusIrq {
None,
Insert,
Remove,
InsertAndRemove,
}
/// From the raw u8 read back from the register
impl From<u8> for VbusIrq {
fn from(value: u8) -> Self {
if (value & VBUS_INSERT_MASK) == 0 && (value & VBUS_REMOVE_MASK) == 0 {
VbusIrq::None
} else if (value & VBUS_INSERT_MASK) != 0 && (value & VBUS_REMOVE_MASK) == 0 {
VbusIrq::Insert
} else if (value & VBUS_INSERT_MASK) == 0 && (value & VBUS_REMOVE_MASK) != 0 {
VbusIrq::Remove
} else {
VbusIrq::InsertAndRemove
}
}
}
#[repr(u8)]
#[derive(PartialEq, Eq, Clone, Copy)]
pub enum WhichLdo {
@ -215,6 +247,37 @@ impl Axp2101 {
}
ctl
}
/// This will clear all other IRQ sources except VBUS IRQ
/// If we need to take more IRQ sources then this API will need to be refactored.
pub fn setup_vbus_irq(&mut self, i2c: &mut dyn i2c::I2cApi, mode: VbusIrq) -> Result<(), xous::Error> {
let data = match mode {
VbusIrq::None => 0u8,
VbusIrq::Insert => VBUS_INSERT_MASK,
VbusIrq::Remove => VBUS_REMOVE_MASK,
VbusIrq::InsertAndRemove => VBUS_INSERT_MASK | VBUS_REMOVE_MASK,
};
// ENABLE1 has the code we want to target, but the rest also needs to be cleared so
// fill the values in with 0.
i2c.i2c_write(AXP2101_DEV, REG_IRQ_ENABLE0, &[0, data, 0]).map(|_| ())?;
// clear the status bits
let mut status = [0u8; 3];
i2c.i2c_read(AXP2101_DEV, REG_IRQ_STATUS0, &mut status, false)?;
i2c.i2c_write(AXP2101_DEV, REG_IRQ_STATUS0, &status).map(|_| ())
}
pub fn get_vbus_irq_status(&self, i2c: &mut dyn i2c::I2cApi) -> Result<VbusIrq, xous::Error> {
let mut buf = [0u8];
i2c.i2c_read(AXP2101_DEV, REG_IRQ_STATUS1, &mut buf, false)?;
Ok(VbusIrq::from(buf[0]))
}
/// This will clear all pending IRQs, regardless of the setup
pub fn clear_vbus_irq_pending(&mut self, i2c: &mut dyn i2c::I2cApi) -> Result<(), xous::Error> {
let data = VBUS_INSERT_MASK | VBUS_REMOVE_MASK;
i2c.i2c_write(AXP2101_DEV, REG_IRQ_STATUS1, &[data]).map(|_| ())
}
}
pub fn parse_dcdc_ena(d: u8) -> ([bool; 4], bool, bool) {