move SPINOR params into board definition

this makes a lot more sense that defining it at the chip level
This commit is contained in:
bunnie 2025-05-05 01:47:50 +08:00
parent 46f4112f1a
commit 868a1f280b
2 changed files with 12 additions and 3 deletions

View file

@ -5,6 +5,15 @@ pub const I2C_AXP2101_ADR: u8 = 0x34;
pub const I2C_TUSB320_ADR: u8 = 0x47;
pub const I2C_BQ27427_ADR: u8 = 0x55;
// location and organization of SPINOR should be board-specific
pub const SPINOR_PAGE_LEN: u32 = 0x100;
pub const SPINOR_ERASE_SIZE: u32 = 0x1000; // this is the smallest sector size.
pub const SPINOR_BULK_ERASE_SIZE: u32 = 0x1_0000; // this is the bulk erase size.
pub const SPINOR_LEN: u32 = 16384 * 1024;
pub const PDDB_LOC: u32 = 4096 * 1024; // located 4MiB in, after the swap image
pub const PDDB_LEN: u32 = 4096 * 1024; // 4MiB data for the PDDB total
// top 8 megs are reserved for staging updates, backups, etc.
// console uart buffer
pub const UART_DMA_TX_BUF_PHYS: usize = utralib::HW_IFRAM0_MEM + utralib::HW_IFRAM0_MEM_LEN - 4096;

View file

@ -4,9 +4,9 @@ use utralib::*;
use crate::ifram::IframRange;
use crate::udma::*;
pub const FLASH_PAGE_LEN: usize = 256;
pub const FLASH_SECTOR_LEN: usize = 4096;
pub const BLOCK_ERASE_LEN: usize = 65536;
pub const FLASH_PAGE_LEN: usize = crate::board::SPINOR_PAGE_LEN as usize;
pub const FLASH_SECTOR_LEN: usize = crate::board::SPINOR_ERASE_SIZE as usize;
pub const BLOCK_ERASE_LEN: usize = crate::board::SPINOR_BULK_ERASE_SIZE as usize;
// ----------------------------------- SPIM ------------------------------------