add handling for dabao case in baremetal

This commit is contained in:
bunnie 2025-10-31 09:46:09 +08:00
parent 8b5f27daae
commit 7e47d27d37
3 changed files with 23 additions and 13 deletions

View file

@ -42,12 +42,13 @@ artyvexii = ["utralib/artyvexii", "linked_list_allocator"]
bao1x = [
"utralib/bao1x",
"linked_list_allocator",
"bao1x-hal/loader-baosec",
"bao1x-hal/debug-print-uart",
"bao1x-api",
"digest",
"sha2-bao1x",
]
board-baosec = ["bao1x-hal/loader-baosec"]
board-dabao = ["bao1x-hal/board-dabao"]
# activates BIO test suite
bao1x-bio = [
"xous-bio-bdma/bio-mul",

View file

@ -29,7 +29,6 @@ pub const SCRATCH_PAGE: usize = HEAP_START + HEAP_LEN + 4096;
pub const UART_IFRAM_ADDR: usize = bao1x_hal::board::UART_DMA_TX_BUF_PHYS;
pub const SYSTEM_CLOCK_FREQUENCY: u32 = 700_000_000;
use bao1x_api::SYSTEM_TICK_INTERVAL_MS;
pub fn early_init() {
let iox = Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
@ -91,13 +90,23 @@ pub fn early_init() {
// Baosec specific:
// Setup I/Os so things that should be powered off are actually off
bao1x_hal::board::setup_display_pins(&iox);
bao1x_hal::board::setup_memory_pins(&iox);
bao1x_hal::board::setup_i2c_pins(&iox);
bao1x_hal::board::setup_camera_pins(&iox);
bao1x_hal::board::setup_kb_pins(&iox);
bao1x_hal::board::setup_oled_power_pin(&iox);
bao1x_hal::board::setup_trng_power_pin(&iox);
#[cfg(feature = "board-baosec")]
{
bao1x_hal::board::setup_display_pins(&iox);
bao1x_hal::board::setup_memory_pins(&iox);
bao1x_hal::board::setup_i2c_pins(&iox);
bao1x_hal::board::setup_camera_pins(&iox);
bao1x_hal::board::setup_kb_pins(&iox);
bao1x_hal::board::setup_oled_power_pin(&iox);
bao1x_hal::board::setup_trng_power_pin(&iox);
}
#[cfg(feature = "board-dabao")]
{
// this actively drives the pin high, allowing USB to connect
bao1x_hal::board::setup_usb_pins(&iox);
// this puts the pin into a tri-state
bao1x_hal::board::setup_boot_pin(&iox);
}
crate::println!("scratch page: {:x}, heap start: {:x}", SCRATCH_PAGE, HEAP_START);
crate::println!("CPU freq: {} MHz", SYSTEM_CLOCK_FREQUENCY / 2);
}
@ -109,7 +118,7 @@ pub fn setup_timer() {
timer.wfo(utra::timer0::EV_ENABLE_ZERO, 0);
timer.wfo(utra::timer0::EV_PENDING_ZERO, 1);
let ms = SYSTEM_TICK_INTERVAL_MS;
let ms = 1;
timer.wfo(utra::timer0::EN_EN, 0b0); // disable the timer
// load its values
timer.wfo(utra::timer0::LOAD_LOAD, 0);

View file

@ -669,7 +669,7 @@ impl Repl {
}
}
}
#[cfg(all(feature = "bao1x", not(feature = "bao1x-evb")))]
#[cfg(all(feature = "bao1x", feature = "board-baosec"))]
"ldo" => {
if args.len() != 1 {
return Err(Error::help("vdd85 [on|off]"));
@ -736,7 +736,7 @@ impl Repl {
iox.set_gpio_pin_value(IoxPort::PA, 5, IoxValue::High);
}
}
#[cfg(all(feature = "bao1x", not(feature = "bao1x-evb")))]
#[cfg(all(feature = "bao1x", feature = "board-baosec"))]
"wfi" => {
let iox = bao1x_hal::iox::Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
@ -1143,7 +1143,7 @@ impl Repl {
crate::print!(", mon");
#[cfg(feature = "bao1x-bio")]
crate::print!(", bio, bdma, pin");
#[cfg(all(feature = "bao1x", not(feature = "bao1x-evb")))]
#[cfg(all(feature = "bao1x", feature = "board-baosec"))]
crate::print!(", ldo, wfi");
#[cfg(feature = "bao1x-usb")]
crate::print!(", usb");