add iox function to cram-hal-service

also modularize ifram into a separate file
This commit is contained in:
bunnie 2024-01-23 04:00:39 +08:00
parent 1e93171575
commit 7da6649e30
7 changed files with 504 additions and 148 deletions

View file

@ -12,12 +12,22 @@ utralib = { version = "0.1.24", optional = true, default-features = false, featu
xous-api-names = "0.9.55"
xous-api-ticktimer = "0.9.53"
xous = "0.9.57"
xous-ipc = "0.9.57"
log-server = { package = "xous-api-log", version = "0.1.53" }
log = "0.4.14"
cramium-hal = { path = "../../libs/cramium-hal" }
cramium-hal = { path = "../../libs/cramium-hal", features = ["derive-rkyv"] }
xous-pl230 = { path = "../../libs/xous-pl230", features = ["cramium-soc"] }
xous-pio = { path = "../../libs/xous-pio", features = ["cramium-soc"] }
pio-proc = "0.2.2"
pio = "0.2.1"
num-derive = { version = "0.3.3", default-features = false }
num-traits = { version = "0.2.14", default-features = false }
rkyv = { version = "0.4.3", default-features = false, features = [
"const_generics",
] }
[features]
pio = []
pio-memlcd = []
default = []

View file

@ -1,13 +1,112 @@
use cramium_hal::iox;
#[derive(Debug, num_derive::FromPrimitive, num_derive::ToPrimitive)]
#[repr(usize)]
pub enum Opcode {
/// Allocate an IFRAM block
MapIfram,
MapIfram = 0,
/// Deallocate an IFRAM block
UnmapIfram,
UnmapIfram = 1,
/// Manage PIO behaviors. PIO requires real-time behaviors, so
/// the idea is that this service encodes a set of "behaviors" that
/// are API extensions which are modular. The behaviors are set up as
/// feature flags. Fast bulk data transfer to/from the behaviors is
/// done using IFRAM blocks, which are managed by the above API calls;
/// otherwise "singleton" peeks and pokes to the PIO should be handled
/// with specific ScalarMessage calls to minimize OS overhead in
/// context-switching to the block.
#[cfg(feature = "pio")]
ConfigurePioBehavior = 2,
/// Gutter for Invalid Calls
InvalidCall,
InvalidCall = 3,
/// Configure Iox (memory mutable lend)
ConfigureIox = 4,
/// Set the whole bank with a value/bitmask pair (blocking scalar)
SetGpioBank = 5,
/// Return the value of a GPIO bank (blocking scalar)
GetGpioBank = 6,
/// Exit server
Quit,
Quit = 255,
/// Behavior opcode base
#[cfg(feature = "pio")]
BehaviorBase0 = 0x1000,
#[cfg(feature = "pio")]
BehaviorBase1 = 0x2000,
#[cfg(feature = "pio")]
BehaviorBase2 = 0x3000,
#[cfg(feature = "pio")]
BehaviorBase3 = 0x4000,
}
#[derive(Debug, Copy, Clone, rkyv::Archive, rkyv::Serialize, rkyv::Deserialize)]
#[cfg(feature = "pio")]
pub enum PioBehavior {
/// PIO pins for sclk, si, scs + IFRAM physical address
#[cfg(feature = "pio-memlcd")]
MemoryLcd(u8, u8, u8, usize),
}
#[derive(Debug, Copy, Clone, rkyv::Archive, rkyv::Serialize, rkyv::Deserialize)]
#[cfg(feature = "pio")]
pub enum BehaviorBase {
Base0,
Base1,
Base2,
Base3,
}
#[derive(Debug, Copy, Clone, rkyv::Archive, rkyv::Serialize, rkyv::Deserialize)]
#[cfg(feature = "pio")]
pub enum PioResult {
Ok(BehaviorBase),
NoSmAvailable,
PinConflict,
}
#[derive(Debug, Copy, Clone, rkyv::Archive, rkyv::Serialize, rkyv::Deserialize)]
#[cfg(feature = "pio-memlcd")]
#[repr(usize)]
pub enum MemoryLcdOpcode {
/// Blit a frame, don't block. If a callback is set, messages the callback when done.
BlitFrameNonBlocking = 0,
/// Blit a frame, block until blit is done
BiltFrameBlocking = 1,
/// Poll if blitting is in progress
IsBusy = 2,
/// Sets a callback address as SID + opcode for pingbacks when the blit is done.
SetCallbackServer = 3,
}
#[derive(Debug, rkyv::Archive, rkyv::Serialize, rkyv::Deserialize)]
pub struct IoxConfigMessage {
pub port: iox::IoxPort,
pub pin: u8,
pub direction: Option<iox::IoxDir>,
pub function: Option<iox::IoxFunction>,
pub schmitt_trigger: Option<iox::IoxEnable>,
pub pullup: Option<iox::IoxEnable>,
pub slow_slew: Option<iox::IoxEnable>,
pub strength: Option<iox::IoxDriveStrength>,
}
#[derive(Debug, rkyv::Archive, rkyv::Serialize, rkyv::Deserialize)]
pub enum IoxRequest {
// possible requests
Direction(iox::IoxDir),
Pullup(iox::IoxEnable),
SchmittTrigger(iox::IoxEnable),
SlowSlew(iox::IoxEnable),
DriveStrength(iox::IoxDriveStrength),
SetAlternateFunction(iox::IoxFunction),
SetPioFromPioBitmask(u32),
SetPioFromPortAndPin(bool),
// possible return results
ResultPortPin(iox::IoxPort, u8),
ResultOk,
ResultErr,
}

View file

@ -0,0 +1,154 @@
use num_traits::*;
use xous::{send_message, MemoryAddress, MemoryRange, MemorySize, Message, Result};
use crate::{Opcode, SERVER_NAME_CRAM_HAL};
pub enum IframBank {
Bank0,
Bank1,
}
/// `IframRange` is a range of memory that is suitable for use as a DMA target.
pub struct IframRange {
pub(crate) phys_addr: MemoryAddress,
pub(crate) memory: MemoryRange,
pub(crate) size: MemorySize,
pub(crate) conn: xous::CID,
}
impl IframRange {
/// Request `length` bytes of memory in an optional Bank
///
/// Safety: the caller must ensure that the `IframRange` object lives for the
/// entire lifetime of the *hardware* operation.
///
/// Example of how things can go wrong: `IframRange` is used to allocate
/// a buffer for data that takes a long time to send via a slow UART.
/// The DMA is initiated, and the function exits, dropping `IframRange`.
/// At this point, the range could be re-allocated for another purpose.
///
/// An `IframRange` would naturally live as long as a DMA request
/// if a sender synchronizes on the completion of the DMA request. Thus,
/// the `unsafe` bit happens in "fire-and-forget" contexts, and the
/// caller has to explicitly manage the lifetime of this object to
/// match the maximum duration of the call.
///
/// A simple way to do this is to simply bind the structure to a long-lived
/// scope, but the trade-off is that IFRAM is very limited in capacity
/// and hanging on to chunks much longer than necessary can lead to memory
/// exhaustion.
pub unsafe fn request(length: usize, bank: Option<IframBank>) -> Option<Self> {
REFCOUNT.fetch_add(1, Ordering::Relaxed);
let xns = xous_api_names::XousNames::new().unwrap();
let conn =
xns.request_connection(SERVER_NAME_CRAM_HAL).expect("Couldn't connect to Cramium HAL server");
let bank_code = match bank {
Some(IframBank::Bank0) => 0,
Some(IframBank::Bank1) => 1,
_ => 2,
};
match send_message(
conn,
Message::new_blocking_scalar(Opcode::MapIfram.to_usize().unwrap(), length, bank_code, 0, 0),
) {
Ok(Result::Scalar5(maybe_size, maybe_phys_address, _, _, _)) => {
if maybe_size != 0 && maybe_phys_address != 0 {
let mut page_aligned_size = maybe_size / 4096;
if maybe_size % 4096 != 0 {
page_aligned_size += 1;
}
let virtual_pages = xous::map_memory(
core::num::NonZeroUsize::new(maybe_phys_address),
None,
page_aligned_size,
xous::MemoryFlags::R | xous::MemoryFlags::W,
)
.unwrap();
Some(IframRange {
phys_addr: MemoryAddress::new(maybe_phys_address).unwrap(),
memory: virtual_pages,
size: MemorySize::new(maybe_size).unwrap(),
conn,
})
} else {
if REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
// "almost" safe because we checked our reference count before disconnecting
// there is a race condition possibly if someone allocates a connection between
// the check above, and the disconnect below.
unsafe { xous::disconnect(conn).unwrap() }
};
None
}
}
_ => {
if REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
// "almost" safe because we checked our reference count before disconnecting
// there is a race condition possibly if someone allocates a connection between
// the check above, and the disconnect below.
unsafe { xous::disconnect(conn).unwrap() }
};
None
}
}
}
/// Returns the IframRange as a slice, useful for passing to the UDMA API calls.
/// This is `unsafe` because the slice is actually not accessible in virtual memory mode:
/// any attempt to reference the returned slice will result in a panic. The returned
/// slice is *only* useful as a range-checked base/bounds for UDMA API calls.
pub unsafe fn as_phys_slice(&self) -> &[u8] {
core::slice::from_raw_parts(self.phys_addr.get() as *const u8, self.size.get())
}
pub fn as_slice(&self) -> &[u8] {
// safe because `u8` is always representable on our system
unsafe { self.memory.as_slice() }
}
pub fn as_slice_u32(&self) -> &[u32] {
// safe because `u32` is always representable on our system
unsafe { self.memory.as_slice() }
}
pub fn as_slice_mut(&mut self) -> &mut [u8] {
// safe because `u8` is always representable on our system
unsafe { self.memory.as_slice_mut() }
}
pub fn as_slice_u32_mut(&mut self) -> &mut [u32] {
// safe because `u32` is always representable on our system
unsafe { self.memory.as_slice_mut() }
}
}
use core::sync::atomic::{AtomicU32, Ordering};
pub(crate) static REFCOUNT: AtomicU32 = AtomicU32::new(0);
impl Drop for IframRange {
fn drop(&mut self) {
match send_message(
self.conn,
Message::new_blocking_scalar(
Opcode::UnmapIfram.to_usize().unwrap(),
self.size.get(),
self.phys_addr.get(),
0,
0,
),
) {
Ok(_) => (),
Err(e) => {
// This probably never happens, but also probably doesn't need to be a hard-panic
// if it does happen because it simply degrades performance; it does not impact
// correctness.
log::error!("Couldn't de-allocate IframRange: {:?}, IFRAM memory is leaking!", e)
}
}
// de-allocate myself. It's unsafe because we are responsible to make sure nobody else is using the
// connection.
if REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
unsafe {
xous::disconnect(self.conn).unwrap();
}
}
}
}

View file

@ -0,0 +1,150 @@
use cramium_hal::iox::{IoxDir, IoxDriveStrength, IoxEnable, IoxFunction, IoxPort, IoxValue};
use num_traits::*;
use crate::{IoxConfigMessage, Opcode, SERVER_NAME_CRAM_HAL};
pub struct IoxHal {
conn: xous::CID,
}
impl IoxHal {
pub fn new() -> Self {
crate::REFCOUNT.fetch_add(1, Ordering::Relaxed);
let xns = xous_api_names::XousNames::new().unwrap();
let conn =
xns.request_connection(SERVER_NAME_CRAM_HAL).expect("Couldn't connect to Cramium HAL server");
IoxHal { conn }
}
pub fn setup_io_pin(
&self,
port: IoxPort,
pin: u8,
direction: Option<IoxDir>,
function: Option<IoxFunction>,
schmitt_trigger: Option<IoxEnable>,
pullup: Option<IoxEnable>,
slow_slew: Option<IoxEnable>,
strength: Option<IoxDriveStrength>,
) {
let msg =
IoxConfigMessage { port, pin, direction, function, schmitt_trigger, pullup, slow_slew, strength };
let buf = xous_ipc::Buffer::into_buf(msg).unwrap();
buf.lend(self.conn, Opcode::ConfigureIox.to_u32().unwrap()).expect("Couldn't set up IO");
}
pub fn set_gpio_pin_value(&self, port: IoxPort, pin: u8, value: IoxValue) {
xous::send_message(
self.conn,
xous::Message::new_blocking_scalar(
Opcode::SetGpioBank.to_usize().unwrap(),
port as usize,
// which pin, as a bitmask
1 << pin as usize,
// values to set
(value as usize) << (pin as usize),
0,
),
)
.expect("Couldn't set GPIO pin value");
}
pub fn set_gpio_bank_value(&self, port: IoxPort, value: u16, bitmask: u16) {
xous::send_message(
self.conn,
xous::Message::new_blocking_scalar(
Opcode::SetGpioBank.to_usize().unwrap(),
port as usize,
// values to set
value as usize,
// mask of valid bits
bitmask as usize,
0,
),
)
.expect("Couldn't set GPIO pin value");
}
pub fn get_gpio_pin_value(&self, port: IoxPort, pin: u8) -> IoxValue {
match xous::send_message(
self.conn,
xous::Message::new_blocking_scalar(
Opcode::GetGpioBank.to_usize().unwrap(),
port as usize,
0,
0,
0,
),
) {
Ok(xous::Result::Scalar5(value, _, _, _, _)) => {
if value & (1 << pin as usize) != 0 {
IoxValue::High
} else {
IoxValue::Low
}
}
_ => panic!("Internal Error: Couldn't get GPIO pin value"),
}
}
pub fn get_gpio_bank_value(&self, port: IoxPort) -> u32 {
match xous::send_message(
self.conn,
xous::Message::new_blocking_scalar(
Opcode::GetGpioBank.to_usize().unwrap(),
port as usize,
0,
0,
0,
),
) {
Ok(xous::Result::Scalar5(value, _, _, _, _)) => value as u32,
_ => panic!("Internal Error: Couldn't get GPIO pin value"),
}
}
/// This function takes a 32-bit bitmask, corresponding to PIO 31 through 0, where
/// a `1` indicates to map that PIO to a GPIO.
///
/// This function will automatically remap the AF and PIO settings for the PIO pins
/// specified in the bitmask, corresponding to the PIO GPIO pin number. If a `0` is
/// present in a bit position, it will turn off the PIO mux, but not change the AF setting.
///
/// VERY IMPORTANT: Note that the PIO GPIO number is *not* consistent with the
/// numbering order of the GPIO ports: in fact, it is reverse-order for PORT B and in-order with skips for
/// PORT C. Also, bits 22, 27, 30 and 31 are not mappable for the PIO.
///
/// Returns: a 32-entry array which records which GPIO bank and pin number was affected
/// by the mapping request. The index of the array corresponds to the bit position in
/// the bitmask. You may use this to pass as arguments to further functions
/// that do things like control slew rate or apply pull-ups.
pub fn set_ports_from_pio_bitmask(&self, _enable_bitmask: u32) -> [Option<(IoxPort, u8)>; 32] {
todo!("Do this when we get around to filling in the PIO drivers")
}
/// Returns the PIO bit that was enabled based on the port and pin specifier given;
/// returns `None` if the proposed mapping is invalid.
pub fn set_pio_bit_from_port_and_pin(&self, _port: IoxPort, _pin: u8) -> Option<u8> {
todo!("Do this when we get around to filling in the PIO drivers")
}
/// Returns the PIO bit that was disabled based on the port and pin specifier given;
/// returns `None` if the proposed mapping is invalid. Does not change the AF mapping,
/// simply disables the bit in the PIO mux register.
pub fn unset_pio_bit_from_port_and_pin(&self, _port: IoxPort, _pin: u8) -> Option<u8> {
todo!("Do this when we get around to filling in the PIO drivers")
}
}
use core::sync::atomic::Ordering;
impl Drop for IoxHal {
fn drop(&mut self) {
// de-allocate myself. It's unsafe because we are responsible to make sure nobody else is using the
// connection.
if crate::REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
unsafe {
xous::disconnect(self.conn).unwrap();
}
}
}
}

View file

@ -1,148 +1,9 @@
pub mod api;
use core::sync::atomic::{AtomicU32, Ordering};
pub mod ifram_lib;
pub mod iox_lib;
pub use api::*;
use num_traits::*;
use xous::{send_message, MemoryAddress, MemoryRange, MemorySize, Message, Result};
static REFCOUNT: AtomicU32 = AtomicU32::new(0);
pub use ifram_lib::*;
pub use iox_lib::*;
pub const SERVER_NAME_CRAM_HAL: &str = "_Cramium-SoC HAL_";
pub enum IframBank {
Bank0,
Bank1,
}
/// `IframRange` is a range of memory that is suitable for use as a DMA target.
pub struct IframRange {
pub(crate) phys_addr: MemoryAddress,
pub(crate) memory: MemoryRange,
pub(crate) size: MemorySize,
pub(crate) conn: xous::CID,
}
impl IframRange {
/// Request `length` bytes of memory in an optional Bank
///
/// Safety: the caller must ensure that the `IframRange` object lives for the
/// entire lifetime of the *hardware* operation.
///
/// Example of how things can go wrong: `IframRange` is used to allocate
/// a buffer for data that takes a long time to send via a slow UART.
/// The DMA is initiated, and the function exits, dropping `IframRange`.
/// At this point, the range could be re-allocated for another purpose.
///
/// An `IframRange` would naturally live as long as a DMA request
/// if a sender synchronizes on the completion of the DMA request. Thus,
/// the `unsafe` bit happens in "fire-and-forget" contexts, and the
/// caller has to explicitly manage the lifetime of this object to
/// match the maximum duration of the call.
///
/// A simple way to do this is to simply bind the structure to a long-lived
/// scope, but the trade-off is that IFRAM is very limited in capacity
/// and hanging on to chunks much longer than necessary can lead to memory
/// exhaustion.
pub unsafe fn request(length: usize, bank: Option<IframBank>) -> Option<Self> {
REFCOUNT.fetch_add(1, Ordering::Relaxed);
let xns = xous_api_names::XousNames::new().unwrap();
let conn =
xns.request_connection(SERVER_NAME_CRAM_HAL).expect("Couldn't connect to Cramium HAL server");
let bank_code = match bank {
Some(IframBank::Bank0) => 0,
Some(IframBank::Bank1) => 1,
_ => 2,
};
match send_message(
conn,
Message::new_blocking_scalar(Opcode::MapIfram.to_usize().unwrap(), length, bank_code, 0, 0),
) {
Ok(Result::Scalar5(maybe_size, maybe_phys_address, _, _, _)) => {
if maybe_size != 0 && maybe_phys_address != 0 {
let mut page_aligned_size = maybe_size / 4096;
if maybe_size % 4096 != 0 {
page_aligned_size += 1;
}
let virtual_pages = xous::map_memory(
core::num::NonZeroUsize::new(maybe_phys_address),
None,
page_aligned_size,
xous::MemoryFlags::R | xous::MemoryFlags::W,
)
.unwrap();
Some(IframRange {
phys_addr: MemoryAddress::new(maybe_phys_address).unwrap(),
memory: virtual_pages,
size: MemorySize::new(maybe_size).unwrap(),
conn,
})
} else {
if REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
// "almost" safe because we checked our reference count before disconnecting
// there is a race condition possibly if someone allocates a connection between
// the check above, and the disconnect below.
unsafe { xous::disconnect(conn).unwrap() }
};
None
}
}
_ => {
if REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
// "almost" safe because we checked our reference count before disconnecting
// there is a race condition possibly if someone allocates a connection between
// the check above, and the disconnect below.
unsafe { xous::disconnect(conn).unwrap() }
};
None
}
}
}
/// Returns the IframRange as a slice, useful for passing to the UDMA API calls.
/// This is `unsafe` because the slice is actually not accessible in virtual memory mode:
/// any attempt to reference the returned slice will result in a panic. The returned
/// slice is *only* useful as a range-checked base/bounds for UDMA API calls.
pub unsafe fn as_phys_slice(&self) -> &[u8] {
core::slice::from_raw_parts(self.phys_addr.get() as *const u8, self.size.get())
}
pub fn as_slice(&self) -> &[u8] {
// safe because `u8` is always representable on our system
unsafe { self.memory.as_slice() }
}
pub fn as_slice_mut(&mut self) -> &mut [u8] {
// safe because `u8` is always representable on our system
unsafe { self.memory.as_slice_mut() }
}
}
impl Drop for IframRange {
fn drop(&mut self) {
match send_message(
self.conn,
Message::new_blocking_scalar(
Opcode::UnmapIfram.to_usize().unwrap(),
self.size.get(),
self.phys_addr.get(),
0,
0,
),
) {
Ok(_) => (),
Err(e) => {
// This probably never happens, but also probably doesn't need to be a hard-panic
// if it does happen because it simply degrades performance; it does not impact
// correctness.
log::error!("Couldn't de-allocate IframRange: {:?}, IFRAM memory is leaking!", e)
}
}
// de-allocate myself. It's unsafe because we are responsible to make sure nobody else is using the
// connection.
if REFCOUNT.fetch_sub(1, Ordering::Relaxed) == 1 {
unsafe {
xous::disconnect(self.conn).unwrap();
}
}
}
}

View file

@ -1,5 +1,8 @@
mod api;
use api::*;
#[cfg(feature = "pio")]
mod pio;
use cramium_hal::iox;
use xous::sender::Sender;
fn try_alloc(ifram_allocs: &mut Vec<Option<Sender>>, size: usize, sender: Sender) -> Option<usize> {
@ -68,6 +71,15 @@ fn main() {
// `Sender` of it, so fill it with a value for `Some` that can't map to any PID.
ifram_allocs[0][31] = Some(Sender::from_usize(usize::MAX));
let iox_page = xous::syscall::map_memory(
xous::MemoryAddress::new(utralib::generated::HW_IOX_BASE),
None,
4096,
xous::MemoryFlags::R | xous::MemoryFlags::W,
)
.expect("couldn't claim the IOX hardware page");
let mut iox = iox::Iox::new(iox_page.as_mut_ptr() as *mut u32);
let mut msg_opt = None;
log::debug!("Starting main loop");
loop {
@ -152,6 +164,45 @@ fn main() {
}
}
}
Opcode::ConfigureIox => {
let buf =
unsafe { xous_ipc::Buffer::from_memory_message(msg.body.memory_message().unwrap()) };
let config = buf.to_original::<IoxConfigMessage, _>().unwrap();
if let Some(f) = config.function {
iox.set_alternate_function(config.port, config.pin, f);
}
if let Some(d) = config.direction {
iox.set_gpio_dir(config.port, config.pin, d);
}
if let Some(t) = config.schmitt_trigger {
iox.set_gpio_schmitt_trigger(config.port, config.pin, t);
}
if let Some(p) = config.pullup {
iox.set_gpio_pullup(config.port, config.pin, p);
}
if let Some(s) = config.slow_slew {
iox.set_slow_slew_rate(config.port, config.pin, s);
}
if let Some(s) = config.strength {
iox.set_drive_strength(config.port, config.pin, s);
}
}
Opcode::SetGpioBank => {
if let Some(scalar) = msg.body.scalar_message() {
let port: cramium_hal::iox::IoxPort =
num_traits::FromPrimitive::from_usize(scalar.arg1).unwrap();
let value = scalar.arg2 as u16;
let bitmask = scalar.arg3 as u16;
iox.set_gpio_bank(port, value, bitmask);
}
}
Opcode::GetGpioBank => {
if let Some(scalar) = msg.body.scalar_message_mut() {
let port: cramium_hal::iox::IoxPort =
num_traits::FromPrimitive::from_usize(scalar.arg1).unwrap();
scalar.arg1 = iox.get_gpio_bank(port) as usize;
}
}
Opcode::InvalidCall => {
log::error!("Invalid opcode received: {:?}", msg);
}

View file

@ -0,0 +1,31 @@
use cramium_hal::iox;
use xous_pio::*;
/// This is the start of the memory LCD driver program, but aborted because we now
/// realize the UDMA SPI block is much better suited for this task.
fn pio_memlcd_program() {
#[rustfmt::skip]
let memlcd_line = pio_proc::pio_asm!(
// The PIO engine is configured as a simple 16-bit, LSB-first shift register
// to send data to the LCD at a rate of 2 MHz, requesting a new word via DMA
// whenever the shift register is empty. It takes 2 PIO cycles to send one
// bit, so the PIO engine should be configure to run at 4 MHz.
//
// In addition to the shift function, the PIO asserts the chip select signal
// high for 12 cycles (3us @ 4MHz) before the first word starts shifting
//
// At the end of the DMA transfer, CS & clock should be dropped manually.
".side_set 2 opt",
".define CS_SETUP_DELAY 12 ", // setup time for CS
"setup_line:",
" set y, CS_SETUP_DELAY side 0",
"setup_cs:",
" jmp y-- setup_cs side 1", // respect setup time
".wrap_target",
" out pins, 1 side 1", // assert data/clock low
" nop side 3", // clock high
".wrap",
// after data transfer is done, clock and then CS should be dropped manually.
);
}