mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-18 08:52:45 +00:00
add handler for pmic open failure; add test case for self-powerdown
This commit is contained in:
parent
2cb3bbf780
commit
778af25414
1 changed files with 21 additions and 2 deletions
|
|
@ -72,7 +72,7 @@ pub const KERNEL_OFFSET: usize = 0x4_0000;
|
||||||
|
|
||||||
#[cfg(feature = "cramium-soc")]
|
#[cfg(feature = "cramium-soc")]
|
||||||
pub fn early_init() -> u32 {
|
pub fn early_init() -> u32 {
|
||||||
use cramium_hal::{iox::IoxValue, udma::Udma};
|
use cramium_hal::{axp2101::WhichLdo, iox::IoxValue, udma::Udma};
|
||||||
// Set up the initial clocks. This is done as a "poke array" into a table of addresses.
|
// Set up the initial clocks. This is done as a "poke array" into a table of addresses.
|
||||||
// Why? because this is actually how it's done for the chip verification code. We can
|
// Why? because this is actually how it's done for the chip verification code. We can
|
||||||
// make this nicer and more abstract with register meanings down the road, if necessary,
|
// make this nicer and more abstract with register meanings down the road, if necessary,
|
||||||
|
|
@ -263,7 +263,15 @@ pub fn early_init() -> u32 {
|
||||||
};
|
};
|
||||||
let mut i2c = unsafe { cramium_hal::udma::I2c::new_with_ifram(i2c_channel, 400_000, perclk, i2c_ifram) };
|
let mut i2c = unsafe { cramium_hal::udma::I2c::new_with_ifram(i2c_channel, 400_000, perclk, i2c_ifram) };
|
||||||
// setup PMIC
|
// setup PMIC
|
||||||
let mut pmic = cramium_hal::axp2101::Axp2101::new(&mut i2c);
|
let mut pmic = match cramium_hal::axp2101::Axp2101::new(&mut i2c) {
|
||||||
|
Ok(p) => p,
|
||||||
|
Err(_e) => {
|
||||||
|
crate::println!("Couldn't init AXP2101, rebooting");
|
||||||
|
let mut rcurst = CSR::new(utra::sysctrl::HW_SYSCTRL_BASE as *mut u32);
|
||||||
|
rcurst.wo(utra::sysctrl::SFR_RCURST0, 0x55AA);
|
||||||
|
panic!("System should have reset");
|
||||||
|
}
|
||||||
|
};
|
||||||
pmic.set_ldo(&mut i2c, Some(2.5), cramium_hal::axp2101::WhichLdo::Aldo2).unwrap();
|
pmic.set_ldo(&mut i2c, Some(2.5), cramium_hal::axp2101::WhichLdo::Aldo2).unwrap();
|
||||||
pmic.set_dcdc(&mut i2c, Some((1.2, false)), cramium_hal::axp2101::WhichDcDc::Dcdc4).unwrap();
|
pmic.set_dcdc(&mut i2c, Some((1.2, false)), cramium_hal::axp2101::WhichDcDc::Dcdc4).unwrap();
|
||||||
crate::println!("AXP2101 configure: {:?}", pmic);
|
crate::println!("AXP2101 configure: {:?}", pmic);
|
||||||
|
|
@ -282,6 +290,9 @@ pub fn early_init() -> u32 {
|
||||||
};
|
};
|
||||||
// this is safe because we turned on the clocks before calling it
|
// this is safe because we turned on the clocks before calling it
|
||||||
let mut cam = unsafe { cramium_hal::ov2640::Ov2640::new_with_ifram(cam_ifram) };
|
let mut cam = unsafe { cramium_hal::ov2640::Ov2640::new_with_ifram(cam_ifram) };
|
||||||
|
|
||||||
|
// TEMPORARY: turn off SE0 on USB
|
||||||
|
let _se0 = cramium_hal::board::baosec::setup_usb_pins(&iox);
|
||||||
let iox_loop = iox.clone();
|
let iox_loop = iox.clone();
|
||||||
|
|
||||||
// show the boot logo
|
// show the boot logo
|
||||||
|
|
@ -441,6 +452,14 @@ pub fn early_init() -> u32 {
|
||||||
frames += 1;
|
frames += 1;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
// Make this true to have the system shut down by disconnecting its own battery while on battery power
|
||||||
|
// Note this does nothing if you have USB power plugged in.
|
||||||
|
if false {
|
||||||
|
crate::println!("shutting down...");
|
||||||
|
pmic.set_ldo(&mut i2c, Some(0.9), WhichLdo::Aldo3).ok();
|
||||||
|
crate::println!("system should be off");
|
||||||
|
}
|
||||||
|
|
||||||
// ---------------- test TRNG -------------------
|
// ---------------- test TRNG -------------------
|
||||||
// configure the SCE clocks to enable the TRNG
|
// configure the SCE clocks to enable the TRNG
|
||||||
let mut sce = CSR::new(HW_SCE_GLBSFR_BASE as *mut u32);
|
let mut sce = CSR::new(HW_SCE_GLBSFR_BASE as *mut u32);
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue