update selftest to what's used in production

This commit is contained in:
bunnie 2026-03-02 01:24:38 +08:00
parent c38214865f
commit 75c1faa652

View file

@ -2,7 +2,8 @@ use utralib::*;
use xous_bio_bdma::*;
// pinmask 29 is not mapped out. This is tested by pushing the button to allow boot
const DABAO_PINMASK: u32 = 0b0001_1111_1000_1111_0111_1000_0011_1110; // 0x1F8F783E;
// pinmask 12 & 13 not mapped out. This is tested by tx/rx with the tester
const DABAO_PINMASK: u32 = 0b0001_1111_1000_1111_0001_1000_0011_1110; // 0x1F8F183E;
pub fn dabao_selftest() {
let one_way = bao1x_hal::acram::OneWayCounter::new();
@ -14,34 +15,23 @@ pub fn dabao_selftest() {
let mut bio_ss = BioSharedState::new();
let iox = bao1x_hal::iox::Iox::new(utra::iox::HW_IOX_BASE as *mut u32);
iox.set_ports_from_bio_bitmask(DABAO_PINMASK);
iox.set_ports_from_bio_bitmask(DABAO_PINMASK, bao1x_api::bio::IoConfigMode::Overwrite);
bio_ss.init();
bio_ss.load_code(db_pin_test_code(), 0, BioCore::Core0);
bio_ss.bio.wo(utra::bio_bdma::SFR_QDIV0, 0x1_0001);
bio_ss.set_core_run_states([true, false, false, false]);
let pin_ordering: [u32; 19] = [28, 27, 26, 25, 24, 23, 19, 18, 17, 16, 14, 13, 12, 11, 1, 2, 3, 4, 5];
let pin_ordering: [u32; 17] = [28, 27, 26, 25, 24, 23, 19, 18, 17, 16, 12, 11, 1, 2, 3, 4, 5];
crate::println!(
"Starting dabao mini self-test: sets each pin sequentially, in a counter-clockwise order."
);
crate::usb::flush();
crate::delay(30);
const TOTAL_ITERS: usize = 2;
const TOTAL_ITERS: usize = 4;
for i in 0..TOTAL_ITERS {
crate::println!("Iter {}/{}", i + 1, TOTAL_ITERS);
crate::usb::flush();
for pin in pin_ordering {
crate::print!("{} ", pin);
crate::usb::flush();
bio_ss.bio.wo(utra::bio_bdma::SFR_TXF0, 1u32 << pin);
crate::delay(100);
crate::delay(50);
}
crate::println!("");
}
crate::println!("Done; pin state reverted");
crate::usb::flush();
iox.set_ports_from_bio_bitmask(0x0);
iox.set_ports_from_bio_bitmask(0x0, bao1x_api::bio::IoConfigMode::Overwrite);
}
#[rustfmt::skip]
@ -50,7 +40,7 @@ bio_code!(db_pin_test_code, BM_PIN_TEST_START, BM_PIN_TEST_END,
"li a0, -1",
"mv x26, a0", // mask
"mv x25, a0", // inputs
"li a1, 0x3F8F783E", // connected pin mask
"li a1, 0x1F8F183E", // connected pin mask
"mv x24, a1", // select pins as outputs
// receive data from the FIFO, update it to the pins
"10:",