adds a blinky function to the LEDs on the arty board using bio

This commit is contained in:
Sam Chin 2025-06-16 19:04:46 +08:00
parent 1bff1eebf1
commit 663c07fce4
2 changed files with 78 additions and 4 deletions

View file

@ -44,7 +44,7 @@ pub fn uart_irq_handler() {
pub unsafe extern "C" fn rust_entry() -> ! { pub unsafe extern "C" fn rust_entry() -> ! {
// turn on a green LED to indicate boot // turn on a green LED to indicate boot
let mut rgb = CSR::new(utra::rgb::HW_RGB_BASE as *mut u32); let mut rgb = CSR::new(utra::rgb::HW_RGB_BASE as *mut u32);
rgb.wfo(utra::rgb::OUT_OUT, 0x002); rgb.wfo(utra::rgb::OUT_OUT, 0b010000000000);
crate::platform::early_init(); crate::platform::early_init();
crate::println!("\n~~Baremetal up!~~\n"); crate::println!("\n~~Baremetal up!~~\n");
@ -76,7 +76,9 @@ pub unsafe extern "C" fn rust_entry() -> ! {
// Animate the LED flashing to indicate repl loop is running // Animate the LED flashing to indicate repl loop is running
delay(1); delay(1);
count += 1; count += 1;
rgb.wfo(utra::rgb::OUT_OUT, ((count / 500) as u32) << 6);
// &-ing to set LD3 to 0 and then setting the value
rgb.rmwf(utra::rgb::OUT_OUT, rgb.r(utra::rgb::OUT) & 0b000111111111 | ((count / 500) as u32) << 9);
} }
} }

View file

@ -85,9 +85,81 @@ impl Repl {
} }
crate::println!(""); crate::println!("");
} }
"blinky" => {
if args.len() != 2 {
crate::println!("Usage: blinky <LED_NAME> <RGB_HEX_VALUE>");
crate::println!("Example: blinky LD2 ff0000");
crate::println!("Available LEDs: LD0, LD1, LD2");
self.do_cmd = false;
self.cmdline.clear();
return;
}
let ld_name = &args[0];
let hex_code = &args[1];
// Determine shift from LED name based on the hardware layout.
let shift = match ld_name.as_str() {
"LD0" => 0,
"LD1" => 3,
"LD2" => 6,
_ => {
crate::println!("Invalid LD name: {}. Use LD0, LD1, or LD2", ld_name);
self.do_cmd = false;
self.cmdline.clear();
return;
}
};
let color_val = if hex_code.starts_with("0x") {
u32::from_str_radix(&hex_code[2..], 16)
} else {
u32::from_str_radix(hex_code, 16)
};
match color_val {
Ok(color) => {
// convert 24-bit RRGGBB into 3-bit BGR
let r_msb = color & 0x800000;
let g_msb = color & 0x008000;
let b_msb = color & 0x000080;
let bgr_val = (b_msb >> 6) | (g_msb >> 13) | (r_msb >> 23);
let mut rgb = CSR::new(utra::rgb::HW_RGB_BASE as *mut u32);
let new_state = bgr_val << shift;
rgb.rmwf(utra::rgb::OUT_OUT, rgb.r(utra::rgb::OUT) | new_state);
crate::println!(
"Set {} to BGR value 0b{:03b} (from hex {}). Other LEDs are off.",
ld_name,
bgr_val,
hex_code
);
}
Err(_) => {
crate::println!("Invalid hex color value: {}", hex_code);
}
}
}
"help" => {
crate::println!("Available commands:");
crate::println!(" help - Shows this help message.");
crate::println!(" echo [ARGS] - Prints the arguments to the console.");
crate::println!(
" mon - Monitors the program counters of the BIO cores."
);
crate::println!(" blinky <LD> <RGB_HEX> - Sets an LED to a color (turns others off).");
crate::println!(" LD: LD1, LD2, or LD3");
crate::println!(" RGB_HEX: e.g., ff0000 (red), 00ff00 (green), 0000ff (blue)");
}
"" => {}
_ => { _ => {
crate::println!("Command not recognized: {}", cmd); crate::println!("Command not recognized: '{}'", cmd);
crate::println!("Commands include: echo, mon"); crate::println!("Type 'help' for a list of commands.");
} }
} }