add baremetal routine to erase the external swap

needed for renewing boards in testing
This commit is contained in:
bunnie 2025-11-19 13:09:14 +08:00
parent b63b82cca0
commit 5a012be146

View file

@ -1195,6 +1195,64 @@ impl Repl {
}
crate::println!("...done!");
}
#[cfg(feature = "board-baosec")]
"erase_swap" => {
use bao1x_api::{baosec::PDDB_LEN, baosec::PDDB_ORIGIN};
use bao1x_hal::{
board::SPINOR_BULK_ERASE_SIZE,
ifram::IframRange,
iox::Iox,
udma::{Spim, *},
};
let perclk = 100_000_000;
let udma_global = GlobalConfig::new();
// setup the I/O pins
let iox = Iox::new(utralib::generated::HW_IOX_BASE as *mut u32);
let channel = bao1x_hal::board::setup_memory_pins(&iox);
udma_global.clock_on(PeriphId::from(channel));
// safety: this is safe because clocks have been set up
let mut flash_spim = unsafe {
Spim::new_with_ifram(
channel,
// has to be half the clock frequency reaching the block, but
// run it as fast
// as we can run perclk
perclk / 4,
perclk / 2,
SpimClkPol::LeadingEdgeRise,
SpimClkPha::CaptureOnLeading,
SpimCs::Cs0,
0,
0,
None,
256 + 16, /* just enough space to send commands + programming
* page */
4096,
Some(6),
Some(SpimMode::Standard), // guess Standard
IframRange::from_raw_parts(
bao1x_hal::board::SPIM_FLASH_IFRAM_ADDR,
bao1x_hal::board::SPIM_FLASH_IFRAM_ADDR,
4096 * 2,
),
)
};
flash_spim.identify_flash_reset_qpi();
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("flash ID (init): {:x}", flash_id);
flash_spim.mem_qpi_mode(true);
let flash_id = flash_spim.mem_read_id_flash();
crate::println!("QPI flash ID: {:x}", flash_id);
crate::println!("Erasing from {:x}-{:x}...", 0, 2 * SPINOR_BULK_ERASE_SIZE);
for addr in (0..2 * SPINOR_BULK_ERASE_SIZE).step_by(SPINOR_BULK_ERASE_SIZE as usize) {
crate::println!(" {:x}...", addr);
flash_spim.flash_erase_block(addr, SPINOR_BULK_ERASE_SIZE as usize);
}
crate::println!("...done!");
}
"echo" => {
for word in args {
crate::print!("{} ", word);