improve spi device detection code

This commit is contained in:
bunnie 2025-10-30 04:14:28 +08:00
parent 94e1f6044a
commit 3f46e8443c

View file

@ -92,7 +92,7 @@ impl SwapHal {
)
};
// turn off QPI mode, in case it was set from a reboot in a bad state
flash_spim.mem_qpi_mode(false);
flash_spim.identify_flash_reset_qpi();
ram_spim.mem_qpi_mode(false);
// sanity check: read ID
@ -120,11 +120,13 @@ impl SwapHal {
let ram_id = ram_spim.mem_read_id_ram();
crate::println!("QPI flash ID: {:x}", flash_id);
crate::println!("QPI ram ID: {:x}", ram_id);
// density 18, memory type 20, mfg ID C2 ==> MX25L128833F
// density 38, memory type 25, mfg ID C2 ==> MX25U12832F
assert!(flash_id & 0xFF_FF_FF == 0x1820C2 || flash_id & 0xFF_FF_FF == 0x38_25_C2);
assert!(
SPI_FLASH_IDS.contains(&(flash_id & 0xFF_FF_FF)),
"flash_id {:#x} not recognized",
flash_id
);
// KGD 5D, mfg ID 9D; remainder of bits are part of the EID
assert!((ram_id & 0xFF_FF == 0x5D9D) || (ram_id & 0xFF_FF == 0x559d));
assert!(RAM_IDS.contains(&(ram_id & 0xFF_FF)), "ram_id {:#x} not recognized", ram_id);
// allocate the buf
let mut buf = RawPage { data: [0u8; 4096] };