add a bogomips checker

sanity check the PLL settings against the RTC count.
This commit is contained in:
bunnie 2025-08-06 01:16:11 +08:00
parent ca105f4be8
commit 30a15035c9
2 changed files with 71 additions and 27 deletions

View file

@ -24,11 +24,12 @@ pub const SCRATCH_PAGE: usize = HEAP_START - 8192;
pub const UART_IFRAM_ADDR: usize = cramium_hal::board::UART_DMA_TX_BUF_PHYS; pub const UART_IFRAM_ADDR: usize = cramium_hal::board::UART_DMA_TX_BUF_PHYS;
// the 800_000_000 setting is tested to work at least on one sample
pub const SYSTEM_CLOCK_FREQUENCY: u32 = 400_000_000; pub const SYSTEM_CLOCK_FREQUENCY: u32 = 400_000_000;
pub const SYSTEM_TICK_INTERVAL_MS: u32 = 1; pub const SYSTEM_TICK_INTERVAL_MS: u32 = 1;
pub fn early_init() { pub fn early_init() {
let mut uart = crate::debug::Uart {}; let uart = crate::debug::Uart {};
for _ in 0..100 { for _ in 0..100 {
uart.putc('a' as u32 as u8); uart.putc('a' as u32 as u8);
@ -96,7 +97,7 @@ pub fn early_init() {
logic [15:0] trm_aoram1kx36 ; assign trm_aoram1kx36 = trmdat[27]; localparam t_trm IV_trm_aoram1kx36 = IV_sram_sp_hde_inst; logic [15:0] trm_aoram1kx36 ; assign trm_aoram1kx36 = trmdat[27]; localparam t_trm IV_trm_aoram1kx36 = IV_sram_sp_hde_inst;
*/ */
uart.tiny_write_str("t0\r"); crate::println!("setting 0.9v sramtrm");
let mut sramtrm = CSR::new(utra::coresub_sramtrm::HW_CORESUB_SRAMTRM_BASE as *mut u32); let mut sramtrm = CSR::new(utra::coresub_sramtrm::HW_CORESUB_SRAMTRM_BASE as *mut u32);
sramtrm.wo(utra::coresub_sramtrm::SFR_CACHE, 0x3); sramtrm.wo(utra::coresub_sramtrm::SFR_CACHE, 0x3);
sramtrm.wo(utra::coresub_sramtrm::SFR_ITCM, 0x3); sramtrm.wo(utra::coresub_sramtrm::SFR_ITCM, 0x3);
@ -119,7 +120,7 @@ pub fn early_init() {
rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a); rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a);
rbist.wo(utra::rbist_wrp::SFRCR_TRM, (1 << 16) | 0b011_000_00_0_0_000_0_00); rbist.wo(utra::rbist_wrp::SFRCR_TRM, (1 << 16) | 0b011_000_00_0_0_000_0_00);
rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a); rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a);
uart.tiny_write_str("t1\r"); crate::println!("setting other 0.9v trims");
// tcm 0.9v // tcm 0.9v
rbist.wo(utra::rbist_wrp::SFRCR_TRM, (6 << 16) | 0b011_000_00_0_0_000_0_00); rbist.wo(utra::rbist_wrp::SFRCR_TRM, (6 << 16) | 0b011_000_00_0_0_000_0_00);
@ -183,6 +184,16 @@ pub fn early_init() {
// setup heap alloc // setup heap alloc
setup_alloc(); setup_alloc();
setup_timer();
// Rx setup
let mut udma_uart = setup_rx(perclk);
irq_setup();
enable_irq(utra::irqarray5::IRQARRAY5_IRQ);
udma_uart.write("console up\r\n".as_bytes());
}
pub fn setup_timer() {
// Initialize the timer, which is needed by the delay() function. // Initialize the timer, which is needed by the delay() function.
let mut timer = CSR::new(utra::timer0::HW_TIMER0_BASE as *mut u32); let mut timer = CSR::new(utra::timer0::HW_TIMER0_BASE as *mut u32);
// not using interrupts, this will be polled by delay() // not using interrupts, this will be polled by delay()
@ -196,12 +207,6 @@ pub fn early_init() {
timer.wfo(utra::timer0::RELOAD_RELOAD, (SYSTEM_CLOCK_FREQUENCY / 1_000) * ms); timer.wfo(utra::timer0::RELOAD_RELOAD, (SYSTEM_CLOCK_FREQUENCY / 1_000) * ms);
// enable the timer // enable the timer
timer.wfo(utra::timer0::EN_EN, 0b1); timer.wfo(utra::timer0::EN_EN, 0b1);
// Rx setup
let mut udma_uart = setup_rx(perclk);
irq_setup();
enable_irq(utra::irqarray5::IRQARRAY5_IRQ);
udma_uart.write("console up\r\n".as_bytes());
} }
pub fn setup_alloc() { pub fn setup_alloc() {
@ -284,7 +289,7 @@ pub unsafe fn init_clock_asic(freq_hz: u32) -> u32 {
// TODO: this only works for two clock settings. Broken @ 600. Need to fix this to instead derive // TODO: this only works for two clock settings. Broken @ 600. Need to fix this to instead derive
// what pclk is instead of always reporting 100mhz // what pclk is instead of always reporting 100mhz
if freq_hz == 800_000_000 { if freq_hz == 800_000_000 {
daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x01_ff_ff); daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x07_ff_ff);
} else { } else {
daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x03_ff_ff); daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x03_ff_ff);
} }
@ -479,34 +484,34 @@ pub unsafe fn init_clock_asic(freq_hz: u32) -> u32 {
); );
crate::println!("fsvalid: {}", daric_cgu.add(sysctrl::SFR_CGUFSVLD.offset()).read_volatile()); crate::println!("fsvalid: {}", daric_cgu.add(sysctrl::SFR_CGUFSVLD.offset()).read_volatile());
let _cgufsfreq0 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ0.offset()).read_volatile(); let cgufsfreq0 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ0.offset()).read_volatile();
let _cgufsfreq1 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ1.offset()).read_volatile(); let cgufsfreq1 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ1.offset()).read_volatile();
let _cgufsfreq2 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ2.offset()).read_volatile(); let cgufsfreq2 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ2.offset()).read_volatile();
let _cgufsfreq3 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ3.offset()).read_volatile(); let cgufsfreq3 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ3.offset()).read_volatile();
crate::println!( crate::println!(
"Internal osc: {} -> {} MHz ({} MHz)", "Internal osc: {} -> {} MHz ({} MHz)",
_cgufsfreq0, cgufsfreq0,
fsfreq_to_hz(_cgufsfreq0), fsfreq_to_hz(cgufsfreq0),
fsfreq_to_hz_32(_cgufsfreq0) fsfreq_to_hz_32(cgufsfreq0)
); );
crate::println!( crate::println!(
"XTAL: {} -> {} MHz ({} MHz)", "XTAL: {} -> {} MHz ({} MHz)",
_cgufsfreq1, cgufsfreq1,
fsfreq_to_hz(_cgufsfreq1), fsfreq_to_hz(cgufsfreq1),
fsfreq_to_hz_32(_cgufsfreq1) fsfreq_to_hz_32(cgufsfreq1)
); );
crate::println!( crate::println!(
"pll output 0: {} -> {} MHz ({} MHz)", "pll output 0: {} -> {} MHz ({} MHz)",
_cgufsfreq2, cgufsfreq2,
fsfreq_to_hz(_cgufsfreq2), fsfreq_to_hz(cgufsfreq2),
fsfreq_to_hz_32(_cgufsfreq2) fsfreq_to_hz_32(cgufsfreq2)
); );
crate::println!( crate::println!(
"pll output 1: {} -> {} MHz ({} MHz)", "pll output 1: {} -> {} MHz ({} MHz)",
_cgufsfreq3, cgufsfreq3,
fsfreq_to_hz(_cgufsfreq3), fsfreq_to_hz(cgufsfreq3),
fsfreq_to_hz_32(_cgufsfreq3) fsfreq_to_hz_32(cgufsfreq3)
); );
crate::println!("PLL configured to {} MHz", freq_hz / 1_000_000); crate::println!("PLL configured to {} MHz", freq_hz / 1_000_000);

View file

@ -183,6 +183,45 @@ impl Repl {
); );
} }
} }
#[cfg(feature = "cramium-soc")]
"bogomips" => {
crate::println!("start test");
// start the RTC
unsafe { (0x4006100c as *mut u32).write_volatile(1) };
let mut count: usize;
unsafe {
#[rustfmt::skip]
core::arch::asm!(
// grab the RTC value
"li t0, 0x40061000",
"lw t1, 0x0(t0)",
"li t3, 0",
// wait until the next second
"10:",
"lw t2, 0x0(t0)",
"beq t1, t2, 10b",
// start of test
"20:",
// count outer loops
"addi t3, t3, 1",
// inner loop 10,000 times
"li t4, 10000",
"30:",
"addi t4, t4, -1",
"bne x0, t4, 30b",
// after inner loop, check current time; do another outer loop if time is same
"lw t1, 0x0(t0)",
"beq t1, t2, 20b",
out("t0") _,
out("t1") _,
out("t2") _,
out("t3") count,
out("t4") _,
);
}
crate::println!("{}.{} bogomips", (count * 2 * 10_000) / 1_000_000, (count * 2) % 10_000);
crate::platform::setup_timer();
}
"echo" => { "echo" => {
for word in args { for word in args {
crate::print!("{} ", word); crate::print!("{} ", word);
@ -191,7 +230,7 @@ impl Repl {
} }
_ => { _ => {
crate::println!("Command not recognized: {}", cmd); crate::println!("Command not recognized: {}", cmd);
crate::print!("Commands include: echo, poke, peek"); crate::print!("Commands include: echo, poke, peek, bogomips");
#[cfg(feature = "cramium-soc")] #[cfg(feature = "cramium-soc")]
crate::print!(", rram"); crate::print!(", rram");
#[cfg(not(feature = "cramium-soc"))] #[cfg(not(feature = "cramium-soc"))]