mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-19 09:00:54 +00:00
add a bogomips checker
sanity check the PLL settings against the RTC count.
This commit is contained in:
parent
ca105f4be8
commit
30a15035c9
2 changed files with 71 additions and 27 deletions
|
|
@ -24,11 +24,12 @@ pub const SCRATCH_PAGE: usize = HEAP_START - 8192;
|
||||||
|
|
||||||
pub const UART_IFRAM_ADDR: usize = cramium_hal::board::UART_DMA_TX_BUF_PHYS;
|
pub const UART_IFRAM_ADDR: usize = cramium_hal::board::UART_DMA_TX_BUF_PHYS;
|
||||||
|
|
||||||
|
// the 800_000_000 setting is tested to work at least on one sample
|
||||||
pub const SYSTEM_CLOCK_FREQUENCY: u32 = 400_000_000;
|
pub const SYSTEM_CLOCK_FREQUENCY: u32 = 400_000_000;
|
||||||
pub const SYSTEM_TICK_INTERVAL_MS: u32 = 1;
|
pub const SYSTEM_TICK_INTERVAL_MS: u32 = 1;
|
||||||
|
|
||||||
pub fn early_init() {
|
pub fn early_init() {
|
||||||
let mut uart = crate::debug::Uart {};
|
let uart = crate::debug::Uart {};
|
||||||
|
|
||||||
for _ in 0..100 {
|
for _ in 0..100 {
|
||||||
uart.putc('a' as u32 as u8);
|
uart.putc('a' as u32 as u8);
|
||||||
|
|
@ -96,7 +97,7 @@ pub fn early_init() {
|
||||||
logic [15:0] trm_aoram1kx36 ; assign trm_aoram1kx36 = trmdat[27]; localparam t_trm IV_trm_aoram1kx36 = IV_sram_sp_hde_inst;
|
logic [15:0] trm_aoram1kx36 ; assign trm_aoram1kx36 = trmdat[27]; localparam t_trm IV_trm_aoram1kx36 = IV_sram_sp_hde_inst;
|
||||||
|
|
||||||
*/
|
*/
|
||||||
uart.tiny_write_str("t0\r");
|
crate::println!("setting 0.9v sramtrm");
|
||||||
let mut sramtrm = CSR::new(utra::coresub_sramtrm::HW_CORESUB_SRAMTRM_BASE as *mut u32);
|
let mut sramtrm = CSR::new(utra::coresub_sramtrm::HW_CORESUB_SRAMTRM_BASE as *mut u32);
|
||||||
sramtrm.wo(utra::coresub_sramtrm::SFR_CACHE, 0x3);
|
sramtrm.wo(utra::coresub_sramtrm::SFR_CACHE, 0x3);
|
||||||
sramtrm.wo(utra::coresub_sramtrm::SFR_ITCM, 0x3);
|
sramtrm.wo(utra::coresub_sramtrm::SFR_ITCM, 0x3);
|
||||||
|
|
@ -119,7 +120,7 @@ pub fn early_init() {
|
||||||
rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a);
|
rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a);
|
||||||
rbist.wo(utra::rbist_wrp::SFRCR_TRM, (1 << 16) | 0b011_000_00_0_0_000_0_00);
|
rbist.wo(utra::rbist_wrp::SFRCR_TRM, (1 << 16) | 0b011_000_00_0_0_000_0_00);
|
||||||
rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a);
|
rbist.wo(utra::rbist_wrp::SFRAR_TRM, 0x5a);
|
||||||
uart.tiny_write_str("t1\r");
|
crate::println!("setting other 0.9v trims");
|
||||||
|
|
||||||
// tcm 0.9v
|
// tcm 0.9v
|
||||||
rbist.wo(utra::rbist_wrp::SFRCR_TRM, (6 << 16) | 0b011_000_00_0_0_000_0_00);
|
rbist.wo(utra::rbist_wrp::SFRCR_TRM, (6 << 16) | 0b011_000_00_0_0_000_0_00);
|
||||||
|
|
@ -183,6 +184,16 @@ pub fn early_init() {
|
||||||
// setup heap alloc
|
// setup heap alloc
|
||||||
setup_alloc();
|
setup_alloc();
|
||||||
|
|
||||||
|
setup_timer();
|
||||||
|
|
||||||
|
// Rx setup
|
||||||
|
let mut udma_uart = setup_rx(perclk);
|
||||||
|
irq_setup();
|
||||||
|
enable_irq(utra::irqarray5::IRQARRAY5_IRQ);
|
||||||
|
udma_uart.write("console up\r\n".as_bytes());
|
||||||
|
}
|
||||||
|
|
||||||
|
pub fn setup_timer() {
|
||||||
// Initialize the timer, which is needed by the delay() function.
|
// Initialize the timer, which is needed by the delay() function.
|
||||||
let mut timer = CSR::new(utra::timer0::HW_TIMER0_BASE as *mut u32);
|
let mut timer = CSR::new(utra::timer0::HW_TIMER0_BASE as *mut u32);
|
||||||
// not using interrupts, this will be polled by delay()
|
// not using interrupts, this will be polled by delay()
|
||||||
|
|
@ -196,12 +207,6 @@ pub fn early_init() {
|
||||||
timer.wfo(utra::timer0::RELOAD_RELOAD, (SYSTEM_CLOCK_FREQUENCY / 1_000) * ms);
|
timer.wfo(utra::timer0::RELOAD_RELOAD, (SYSTEM_CLOCK_FREQUENCY / 1_000) * ms);
|
||||||
// enable the timer
|
// enable the timer
|
||||||
timer.wfo(utra::timer0::EN_EN, 0b1);
|
timer.wfo(utra::timer0::EN_EN, 0b1);
|
||||||
|
|
||||||
// Rx setup
|
|
||||||
let mut udma_uart = setup_rx(perclk);
|
|
||||||
irq_setup();
|
|
||||||
enable_irq(utra::irqarray5::IRQARRAY5_IRQ);
|
|
||||||
udma_uart.write("console up\r\n".as_bytes());
|
|
||||||
}
|
}
|
||||||
|
|
||||||
pub fn setup_alloc() {
|
pub fn setup_alloc() {
|
||||||
|
|
@ -284,7 +289,7 @@ pub unsafe fn init_clock_asic(freq_hz: u32) -> u32 {
|
||||||
// TODO: this only works for two clock settings. Broken @ 600. Need to fix this to instead derive
|
// TODO: this only works for two clock settings. Broken @ 600. Need to fix this to instead derive
|
||||||
// what pclk is instead of always reporting 100mhz
|
// what pclk is instead of always reporting 100mhz
|
||||||
if freq_hz == 800_000_000 {
|
if freq_hz == 800_000_000 {
|
||||||
daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x01_ff_ff);
|
daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x07_ff_ff);
|
||||||
} else {
|
} else {
|
||||||
daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x03_ff_ff);
|
daric_cgu.add(utra::sysctrl::SFR_CGUFDPER.offset()).write_volatile(0x03_ff_ff);
|
||||||
}
|
}
|
||||||
|
|
@ -479,34 +484,34 @@ pub unsafe fn init_clock_asic(freq_hz: u32) -> u32 {
|
||||||
);
|
);
|
||||||
|
|
||||||
crate::println!("fsvalid: {}", daric_cgu.add(sysctrl::SFR_CGUFSVLD.offset()).read_volatile());
|
crate::println!("fsvalid: {}", daric_cgu.add(sysctrl::SFR_CGUFSVLD.offset()).read_volatile());
|
||||||
let _cgufsfreq0 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ0.offset()).read_volatile();
|
let cgufsfreq0 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ0.offset()).read_volatile();
|
||||||
let _cgufsfreq1 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ1.offset()).read_volatile();
|
let cgufsfreq1 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ1.offset()).read_volatile();
|
||||||
let _cgufsfreq2 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ2.offset()).read_volatile();
|
let cgufsfreq2 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ2.offset()).read_volatile();
|
||||||
let _cgufsfreq3 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ3.offset()).read_volatile();
|
let cgufsfreq3 = daric_cgu.add(sysctrl::SFR_CGUFSSR_FSFREQ3.offset()).read_volatile();
|
||||||
|
|
||||||
crate::println!(
|
crate::println!(
|
||||||
"Internal osc: {} -> {} MHz ({} MHz)",
|
"Internal osc: {} -> {} MHz ({} MHz)",
|
||||||
_cgufsfreq0,
|
cgufsfreq0,
|
||||||
fsfreq_to_hz(_cgufsfreq0),
|
fsfreq_to_hz(cgufsfreq0),
|
||||||
fsfreq_to_hz_32(_cgufsfreq0)
|
fsfreq_to_hz_32(cgufsfreq0)
|
||||||
);
|
);
|
||||||
crate::println!(
|
crate::println!(
|
||||||
"XTAL: {} -> {} MHz ({} MHz)",
|
"XTAL: {} -> {} MHz ({} MHz)",
|
||||||
_cgufsfreq1,
|
cgufsfreq1,
|
||||||
fsfreq_to_hz(_cgufsfreq1),
|
fsfreq_to_hz(cgufsfreq1),
|
||||||
fsfreq_to_hz_32(_cgufsfreq1)
|
fsfreq_to_hz_32(cgufsfreq1)
|
||||||
);
|
);
|
||||||
crate::println!(
|
crate::println!(
|
||||||
"pll output 0: {} -> {} MHz ({} MHz)",
|
"pll output 0: {} -> {} MHz ({} MHz)",
|
||||||
_cgufsfreq2,
|
cgufsfreq2,
|
||||||
fsfreq_to_hz(_cgufsfreq2),
|
fsfreq_to_hz(cgufsfreq2),
|
||||||
fsfreq_to_hz_32(_cgufsfreq2)
|
fsfreq_to_hz_32(cgufsfreq2)
|
||||||
);
|
);
|
||||||
crate::println!(
|
crate::println!(
|
||||||
"pll output 1: {} -> {} MHz ({} MHz)",
|
"pll output 1: {} -> {} MHz ({} MHz)",
|
||||||
_cgufsfreq3,
|
cgufsfreq3,
|
||||||
fsfreq_to_hz(_cgufsfreq3),
|
fsfreq_to_hz(cgufsfreq3),
|
||||||
fsfreq_to_hz_32(_cgufsfreq3)
|
fsfreq_to_hz_32(cgufsfreq3)
|
||||||
);
|
);
|
||||||
|
|
||||||
crate::println!("PLL configured to {} MHz", freq_hz / 1_000_000);
|
crate::println!("PLL configured to {} MHz", freq_hz / 1_000_000);
|
||||||
|
|
|
||||||
|
|
@ -183,6 +183,45 @@ impl Repl {
|
||||||
);
|
);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
#[cfg(feature = "cramium-soc")]
|
||||||
|
"bogomips" => {
|
||||||
|
crate::println!("start test");
|
||||||
|
// start the RTC
|
||||||
|
unsafe { (0x4006100c as *mut u32).write_volatile(1) };
|
||||||
|
let mut count: usize;
|
||||||
|
unsafe {
|
||||||
|
#[rustfmt::skip]
|
||||||
|
core::arch::asm!(
|
||||||
|
// grab the RTC value
|
||||||
|
"li t0, 0x40061000",
|
||||||
|
"lw t1, 0x0(t0)",
|
||||||
|
"li t3, 0",
|
||||||
|
// wait until the next second
|
||||||
|
"10:",
|
||||||
|
"lw t2, 0x0(t0)",
|
||||||
|
"beq t1, t2, 10b",
|
||||||
|
// start of test
|
||||||
|
"20:",
|
||||||
|
// count outer loops
|
||||||
|
"addi t3, t3, 1",
|
||||||
|
// inner loop 10,000 times
|
||||||
|
"li t4, 10000",
|
||||||
|
"30:",
|
||||||
|
"addi t4, t4, -1",
|
||||||
|
"bne x0, t4, 30b",
|
||||||
|
// after inner loop, check current time; do another outer loop if time is same
|
||||||
|
"lw t1, 0x0(t0)",
|
||||||
|
"beq t1, t2, 20b",
|
||||||
|
out("t0") _,
|
||||||
|
out("t1") _,
|
||||||
|
out("t2") _,
|
||||||
|
out("t3") count,
|
||||||
|
out("t4") _,
|
||||||
|
);
|
||||||
|
}
|
||||||
|
crate::println!("{}.{} bogomips", (count * 2 * 10_000) / 1_000_000, (count * 2) % 10_000);
|
||||||
|
crate::platform::setup_timer();
|
||||||
|
}
|
||||||
"echo" => {
|
"echo" => {
|
||||||
for word in args {
|
for word in args {
|
||||||
crate::print!("{} ", word);
|
crate::print!("{} ", word);
|
||||||
|
|
@ -191,7 +230,7 @@ impl Repl {
|
||||||
}
|
}
|
||||||
_ => {
|
_ => {
|
||||||
crate::println!("Command not recognized: {}", cmd);
|
crate::println!("Command not recognized: {}", cmd);
|
||||||
crate::print!("Commands include: echo, poke, peek");
|
crate::print!("Commands include: echo, poke, peek, bogomips");
|
||||||
#[cfg(feature = "cramium-soc")]
|
#[cfg(feature = "cramium-soc")]
|
||||||
crate::print!(", rram");
|
crate::print!(", rram");
|
||||||
#[cfg(not(feature = "cramium-soc"))]
|
#[cfg(not(feature = "cramium-soc"))]
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue