mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-16 08:38:26 +00:00
remove superfluous prints in boot0
removing prints in boot0 gives less handle for glitchers to time off of. Also makes debugging chips harder, but I think the boot0 is starting to get stable enough that this is OK? also removed the frac-PLL setting because it's broken. this causes the PLL in the boot0 to be subtly different from boot1, and I think I like it - it makes the timing of glitches between the two phases different.
This commit is contained in:
parent
5195d46d7b
commit
2a70991d96
1 changed files with 14 additions and 7 deletions
|
|
@ -141,7 +141,8 @@ pub fn early_init() -> Csprng {
|
|||
// external clock could make the chip very exploitable. See inside the function for details.
|
||||
let perclk = unsafe { init_clock_asic_350mhz() };
|
||||
|
||||
crate::println!("scratch page: {:x}, heap start: {:x}", SCRATCH_PAGE, HEAP_START);
|
||||
// crate::println!("scratch page: {:x}, heap start: {:x}", SCRATCH_PAGE, HEAP_START);
|
||||
|
||||
// the CSPRNG is built *after* we go to high speed mode. Note the discipline that after every
|
||||
// print, we insert a random_delay - so that you can't use the print as a reliable trigger.
|
||||
let mut csprng = Csprng::new();
|
||||
|
|
@ -249,8 +250,8 @@ pub fn setup_timer() {
|
|||
|
||||
pub fn setup_alloc() {
|
||||
// Initialize the allocator with heap memory range
|
||||
crate::println!("Setting up heap @ {:x}-{:x}", HEAP_START, HEAP_START + HEAP_LEN);
|
||||
crate::println!("Stack @ {:x}-{:x}", HEAP_START + HEAP_LEN, RAM_BASE + RAM_SIZE);
|
||||
// crate::println!("Setting up heap @ {:x}-{:x}", HEAP_START, HEAP_START + HEAP_LEN);
|
||||
// crate::println!("Stack @ {:x}-{:x}", HEAP_START + HEAP_LEN, RAM_BASE + RAM_SIZE);
|
||||
unsafe {
|
||||
ALLOCATOR.lock().init(HEAP_START as *mut u8, HEAP_LEN);
|
||||
}
|
||||
|
|
@ -342,7 +343,6 @@ mod panic_handler {
|
|||
/// speed makes glitches more difficult to time. We also don't want any risk of a glitch bypassing
|
||||
/// the PLL.
|
||||
pub unsafe fn init_clock_asic_350mhz() -> u32 {
|
||||
let freq_hz = 350_000_000;
|
||||
use utra::sysctrl;
|
||||
let daric_cgu = sysctrl::HW_SYSCTRL_BASE as *mut u32;
|
||||
let mut cgu = CSR::new(daric_cgu);
|
||||
|
|
@ -400,16 +400,23 @@ pub unsafe fn init_clock_asic_350mhz() -> u32 {
|
|||
bao1x_api::bollard!(4);
|
||||
}
|
||||
|
||||
// The frequency of boot0 is ever so slightly different than that of boot1. This originated
|
||||
// from a bug in the chip - the fractional divider on the PLL doesn't work - but actually
|
||||
// I currently like that the boot0 PLL is a little different from boot1 PLL from a security
|
||||
// perspective, because it means any timing worked out on boot0 isn't going to map perfectly
|
||||
// onto boot1 (the difference is 348MHz vs the target 350MHz; the VCO also runs at a
|
||||
// lower frequency so it will have different stability & recovery against glitches)
|
||||
|
||||
// hard-coded so that there's less chances for glitches to muck with PLL parameters
|
||||
cgu.wo(sysctrl::SFR_IPCPLLMN, 0x3057);
|
||||
cgu.wo(sysctrl::SFR_IPCPLLF, 0x1800000);
|
||||
cgu.wo(sysctrl::SFR_IPCPLLF, 0x0800000); // frac turned off - it doesn't work
|
||||
cgu.wo(sysctrl::SFR_IPCPLLQ, 0x3311);
|
||||
cgu.wo(sysctrl::SFR_IPCCR, 0x53);
|
||||
|
||||
bao1x_api::bollard!(6);
|
||||
// written twice - this is safe to do, because values don't take hold until ARIPFLOW is triggered
|
||||
cgu.wo(sysctrl::SFR_IPCPLLMN, 0x3057);
|
||||
cgu.wo(sysctrl::SFR_IPCPLLF, 0x1800000);
|
||||
cgu.wo(sysctrl::SFR_IPCPLLF, 0x0800000); // frac turned off - it doesn't work
|
||||
cgu.wo(sysctrl::SFR_IPCPLLQ, 0x3311);
|
||||
cgu.wo(sysctrl::SFR_IPCCR, 0x53);
|
||||
cgu.wo(sysctrl::SFR_IPCARIPFLOW, 0x32);
|
||||
|
|
@ -435,7 +442,7 @@ pub unsafe fn init_clock_asic_350mhz() -> u32 {
|
|||
bao1x_hal::hardening::check_pll();
|
||||
|
||||
// pll print is put after the routine, so it can't be used as a glitch trigger
|
||||
crate::println!("PLL configured to {} MHz", freq_hz / 1_000_000);
|
||||
// crate::println!("PLL configured to 348 MHz");
|
||||
|
||||
/*
|
||||
// these are the prints used to instrument the normal clock setting flow to derive the constants
|
||||
|
|
|
|||
Loading…
Reference in a new issue