mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-16 08:38:26 +00:00
add verilator-only modifications to the HAL
verilator doesn't implement the TRNG, so the TRNG is bodged. A warning is left in to help remind us/alert us if the bodge is accidentally put into production. the 'dabao' board type is introduced, which is the breakout board codename. camera and display are feature-gated behind their respective board definitions.
This commit is contained in:
parent
56bd0decc9
commit
20b0ecd592
4 changed files with 92 additions and 0 deletions
69
libs/cramium-hal/src/board/dabao.rs
Normal file
69
libs/cramium-hal/src/board/dabao.rs
Normal file
|
|
@ -0,0 +1,69 @@
|
|||
// Constants that define pin locations, RAM offsets, etc. for the DaBao basic breakout board
|
||||
use crate::iox::IoSetup;
|
||||
use crate::iox::*;
|
||||
|
||||
// console uart buffer
|
||||
pub const UART_DMA_TX_BUF_PHYS: usize = utralib::HW_IFRAM0_MEM + utralib::HW_IFRAM0_MEM_LEN - 4096;
|
||||
|
||||
// RAM needs two buffers of 1k + 16 bytes = 2048 + 16 = 2064 bytes; round up to one page
|
||||
pub const SPIM_RAM_IFRAM_ADDR: usize = utralib::HW_IFRAM0_MEM + utralib::HW_IFRAM0_MEM_LEN - 2 * 4096;
|
||||
|
||||
// app uart buffer
|
||||
pub const APP_UART_IFRAM_ADDR: usize = utralib::HW_IFRAM0_MEM + utralib::HW_IFRAM0_MEM_LEN - 3 * 4096;
|
||||
|
||||
// one page for the I2C driver
|
||||
pub const I2C_IFRAM_ADDR: usize = utralib::HW_IFRAM0_MEM + utralib::HW_IFRAM0_MEM_LEN - 4 * 4096;
|
||||
|
||||
// USB pages - USB subsystem is a hog, needs a lot of pages, note this is mutually exclusive with camera,
|
||||
// can't use both at once
|
||||
pub const CRG_IFRAM_PAGES: usize = 23; // +1 for extended application buffer by 4k
|
||||
pub const CRG_UDC_MEMBASE: usize =
|
||||
utralib::HW_IFRAM1_MEM + utralib::HW_IFRAM1_MEM_LEN - CRG_IFRAM_PAGES * 0x1000;
|
||||
|
||||
// MANUALLY SYNCED TO ALLOCATIONS ABOVE
|
||||
// inclusive numbering - we allocate pages from the top-down, so the last number should generally be 31
|
||||
pub const IFRAM0_RESERVED_PAGE_RANGE: [usize; 2] = [31 - 4, 31];
|
||||
pub const IFRAM1_RESERVED_PAGE_RANGE: [usize; 2] = [31 - 0, 31];
|
||||
|
||||
/// returns the USB SE0 port and pin number
|
||||
const SE0_PIN: u8 = 14;
|
||||
pub fn setup_usb_pins<T: IoSetup + IoGpio>(iox: &T) -> (IoxPort, u8) {
|
||||
iox.setup_pin(
|
||||
IoxPort::PB,
|
||||
SE0_PIN,
|
||||
Some(IoxDir::Output),
|
||||
Some(IoxFunction::Gpio),
|
||||
None,
|
||||
None,
|
||||
Some(IoxEnable::Enable),
|
||||
Some(IoxDriveStrength::Drive2mA),
|
||||
);
|
||||
iox.set_gpio_pin_value(IoxPort::PB, SE0_PIN, IoxValue::Low);
|
||||
(IoxPort::PB, SE0_PIN)
|
||||
}
|
||||
|
||||
pub fn setup_i2c_pins(iox: &dyn IoSetup) -> crate::udma::I2cChannel {
|
||||
// I2C_SCL_B[0]
|
||||
iox.setup_pin(
|
||||
IoxPort::PB,
|
||||
11,
|
||||
Some(IoxDir::Output),
|
||||
Some(IoxFunction::AF1),
|
||||
None,
|
||||
None,
|
||||
Some(IoxEnable::Enable),
|
||||
Some(IoxDriveStrength::Drive2mA),
|
||||
);
|
||||
// I2C_SDA_B[0]
|
||||
iox.setup_pin(
|
||||
IoxPort::PB,
|
||||
12,
|
||||
Some(IoxDir::Output),
|
||||
Some(IoxFunction::AF1),
|
||||
Some(IoxEnable::Enable),
|
||||
None,
|
||||
Some(IoxEnable::Enable),
|
||||
Some(IoxDriveStrength::Drive2mA),
|
||||
);
|
||||
crate::udma::I2cChannel::Channel0
|
||||
}
|
||||
|
|
@ -6,3 +6,7 @@ pub use baosec::*;
|
|||
pub mod baosor;
|
||||
#[cfg(feature = "board-baosor")]
|
||||
pub use baosor::*;
|
||||
#[cfg(feature = "board-dabao")]
|
||||
pub mod dabao;
|
||||
#[cfg(feature = "board-dabao")]
|
||||
pub use dabao::*;
|
||||
|
|
|
|||
|
|
@ -2,12 +2,15 @@
|
|||
|
||||
#[macro_use]
|
||||
pub mod debug;
|
||||
#[cfg(feature = "axp2101")]
|
||||
pub mod axp2101;
|
||||
pub mod board;
|
||||
pub mod ifram;
|
||||
pub mod iox;
|
||||
#[cfg(feature = "camera-ov2640")]
|
||||
pub mod ov2640;
|
||||
pub mod sce;
|
||||
#[cfg(feature = "display-sh1107")]
|
||||
pub mod sh1107;
|
||||
pub mod shared_csr;
|
||||
pub mod udma;
|
||||
|
|
|
|||
|
|
@ -84,6 +84,7 @@ const RAW_ENTRIES: usize = 16;
|
|||
/// for at least this many cycles before the next sample is taken, thus
|
||||
/// making it more difficult for any adversary to reason about the current
|
||||
/// state of the TRNG given the QC samples.
|
||||
#[allow(dead_code)]
|
||||
const RAW_GUARDBAND: usize = 32;
|
||||
|
||||
pub struct Trng {
|
||||
|
|
@ -92,6 +93,9 @@ pub struct Trng {
|
|||
mode: Mode,
|
||||
/// Buffer some raw entropy inside the kernel, so we can "burst out" entropy
|
||||
/// for reseed operations without having to wait for the TRNG to regenerate data.
|
||||
///
|
||||
/// This generates an unused warning when `verilator-only` is selected. We leave this
|
||||
/// warning in place to remind ourselves that the TRNG is not real.
|
||||
raw: [Option<u32>; RAW_ENTRIES],
|
||||
#[cfg(feature = "compress-entropy")]
|
||||
rng_var: u8,
|
||||
|
|
@ -110,6 +114,7 @@ impl Trng {
|
|||
}
|
||||
}
|
||||
|
||||
#[cfg(not(feature = "verilator-only"))]
|
||||
pub fn setup_raw_generation(&mut self, count: u16) {
|
||||
self._count = count;
|
||||
self.mode = Mode::Raw;
|
||||
|
|
@ -137,6 +142,10 @@ impl Trng {
|
|||
self.csr.wo(utra::trng::SFR_OPT, 0);
|
||||
}
|
||||
|
||||
#[cfg(feature = "verilator-only")]
|
||||
pub fn setup_raw_generation(&mut self, _count: u16) { self.mode = Mode::Raw; }
|
||||
|
||||
#[cfg(not(feature = "verilator-only"))]
|
||||
pub fn get_raw(&mut self) -> u32 {
|
||||
// Pull from the buffered entropy pool, until it's empty.
|
||||
for d in self.raw.iter_mut() {
|
||||
|
|
@ -217,6 +226,13 @@ impl Trng {
|
|||
self.raw[0].take().unwrap()
|
||||
}
|
||||
|
||||
#[cfg(feature = "verilator-only")]
|
||||
pub fn get_raw(&mut self) -> u32 {
|
||||
// guaranteed random by fair dice roll
|
||||
// (in all seriousness, this is intentional in verilator because there is no TRNG in the RTL model)
|
||||
4
|
||||
}
|
||||
|
||||
pub fn get_u32(&mut self) -> Option<u32> {
|
||||
match self.mode {
|
||||
Mode::Uninit => None,
|
||||
|
|
|
|||
Loading…
Reference in a new issue