mirror of
https://github.com/saymrwulf/xous-core.git
synced 2026-11-20 09:03:28 +00:00
improve formatting & timing slightly
This commit is contained in:
parent
d1a3eb4b58
commit
079ec33134
1 changed files with 13 additions and 8 deletions
|
|
@ -171,7 +171,7 @@ bio_code!(ws2812b_kernel, WS2812B_START, WS2812B_END,
|
||||||
// LEDs will go onto the stack
|
// LEDs will go onto the stack
|
||||||
"li x9, 0x1000000", // bit 24 mask
|
"li x9, 0x1000000", // bit 24 mask
|
||||||
"li sp, 0x800", // start of the LED buffer
|
"li sp, 0x800", // start of the LED buffer
|
||||||
"10:",
|
"10:",
|
||||||
// read a 24-bit color number from FIFO1
|
// read a 24-bit color number from FIFO1
|
||||||
"mv x8, x17",
|
"mv x8, x17",
|
||||||
"sw x8, 0(sp)",
|
"sw x8, 0(sp)",
|
||||||
|
|
@ -181,19 +181,24 @@ bio_code!(ws2812b_kernel, WS2812B_START, WS2812B_END,
|
||||||
"j 10b", // go back and get more data
|
"j 10b", // go back and get more data
|
||||||
|
|
||||||
// -- sending loop --
|
// -- sending loop --
|
||||||
"20:",
|
"20:",
|
||||||
"li x8, 0x800", // x8 now has the starting address of the data we're going to send
|
"li x8, 0x800", // x8 now has the starting address of the data we're going to send
|
||||||
// x9 is the bit 24 mask used by the above loop
|
// x9 is the bit 24 mask used by the above loop
|
||||||
"li x12, 0x800000", // bit 23 mask
|
"li x12, 0x800000", // bit 23 mask
|
||||||
// loop setup done
|
// loop setup done
|
||||||
"30:",
|
"30:",
|
||||||
"li x11, 24", // number of bits to shift through
|
"li x11, 24", // number of bits to shift through
|
||||||
"lw x10, 0(x8)", // fetch the word to send
|
"lw x10, 0(x8)", // fetch the word to send
|
||||||
// "mv x18, x10", // debug by looping back -----------
|
// "mv x18, x10", // debug by looping back -----------
|
||||||
"31:",
|
"31:",
|
||||||
"and x13, x12, x10", // the bit we're contemplating is at bit 23 position, extract it into x13
|
"and x13, x12, x10", // the bit we're contemplating is at bit 23 position, extract it into x13
|
||||||
"bne x13, x0, 40f", // if 1, go to 40f, where the 1 routine is
|
"bne x13, x0, 40f", // if 1, go to 40f, where the 1 routine is
|
||||||
|
|
||||||
|
"mv x20, x0", // snap to quantum before doing the send routine - this improves timing uniformity of high pulses
|
||||||
|
// at the expense of T1L time being a little out of spec, but this is better-tolerated than T0H time being variable.
|
||||||
|
// this quantum snap has to be introduced here because snap quantum to output makes the ws2812 driver not
|
||||||
|
// composable with other BIO applications
|
||||||
|
|
||||||
// zero routine
|
// zero routine
|
||||||
// 2 hi
|
// 2 hi
|
||||||
"mv x22, x4", // sets to 1
|
"mv x22, x4", // sets to 1
|
||||||
|
|
@ -214,7 +219,7 @@ bio_code!(ws2812b_kernel, WS2812B_START, WS2812B_END,
|
||||||
"j 50f", // jump to the loop end check
|
"j 50f", // jump to the loop end check
|
||||||
|
|
||||||
// one routine
|
// one routine
|
||||||
"40:",
|
"40:",
|
||||||
// 7 hi
|
// 7 hi
|
||||||
"mv x22, x4", // sets to 1
|
"mv x22, x4", // sets to 1
|
||||||
"mv x20, x0", // wait for quantum
|
"mv x20, x0", // wait for quantum
|
||||||
|
|
@ -232,16 +237,16 @@ bio_code!(ws2812b_kernel, WS2812B_START, WS2812B_END,
|
||||||
"addi x11, x11, -1", // decrement the pixel bit counter
|
"addi x11, x11, -1", // decrement the pixel bit counter
|
||||||
"mv x20, x0",
|
"mv x20, x0",
|
||||||
|
|
||||||
"50:", // shift and do the next pixel value
|
"50:", // shift and do the next pixel value
|
||||||
"bne x11, x0, 31b", // go back for more in the loop
|
"bne x11, x0, 31b", // go back for more in the loop
|
||||||
|
|
||||||
"60:", // check if we've exhausted all the LED values
|
"60:", // check if we've exhausted all the LED values
|
||||||
"addi x8, x8, 4",
|
"addi x8, x8, 4",
|
||||||
"bge sp, x8, 30b", // see if we've hit the value of current sp
|
"bge sp, x8, 30b", // see if we've hit the value of current sp
|
||||||
"li sp, 0x800", // reset the stack pointer for a fresh fetch
|
"li sp, 0x800", // reset the stack pointer for a fresh fetch
|
||||||
// wait to reset the chain
|
// wait to reset the chain
|
||||||
"li x14, 2000", // delay wait time to reset the chain per spec
|
"li x14, 2000", // delay wait time to reset the chain per spec
|
||||||
"70:",
|
"70:",
|
||||||
"addi x14, x14, -1",
|
"addi x14, x14, -1",
|
||||||
"mv x20, x0",
|
"mv x20, x0",
|
||||||
"bne x14, x0, 70b",
|
"bne x14, x0, 70b",
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue