fix naming for bio api

This commit is contained in:
bunnie 2025-09-14 02:09:40 +08:00
parent a4d9fc9dc7
commit 0391a6aef5
4 changed files with 16 additions and 16 deletions

View file

@ -30,7 +30,7 @@ pub enum HalOpcode {
SetGpioBank = 5,
/// Return the value of a GPIO bank (blocking scalar)
GetGpioBank = 6,
/// Configure BIO
/// Configure BIO pins
ConfigureBio = 17,
/// Configure UDMA clocks & events

View file

@ -82,7 +82,7 @@ pub trait IoSetup {
slow_slew: Option<IoxEnable>,
strength: Option<IoxDriveStrength>,
);
fn set_pio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8>;
fn set_bio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8>;
}
/// Traits for accessing GPIOs after the port has been set up.
@ -230,14 +230,14 @@ impl IoxHal {
/// Returns the PIO bit that was enabled based on the port and pin specifier given;
/// returns `None` if the proposed mapping is invalid.
pub fn set_pio_bit_from_port_and_pin(&self, _port: IoxPort, _pin: u8) -> Option<u8> {
pub fn set_bio_bit_from_port_and_pin(&self, _port: IoxPort, _pin: u8) -> Option<u8> {
todo!("Do this when we get around to filling in the PIO drivers")
}
/// Returns the PIO bit that was disabled based on the port and pin specifier given;
/// returns `None` if the proposed mapping is invalid. Does not change the AF mapping,
/// simply disables the bit in the PIO mux register.
pub fn unset_pio_bit_from_port_and_pin(&self, _port: IoxPort, _pin: u8) -> Option<u8> {
pub fn unset_bio_bit_from_port_and_pin(&self, _port: IoxPort, _pin: u8) -> Option<u8> {
todo!("Do this when we get around to filling in the PIO drivers")
}
}
@ -261,7 +261,7 @@ impl IoSetup for IoxHal {
buf.lend(self.conn, HalOpcode::ConfigureIox as u32).expect("Couldn't set up IO");
}
fn set_pio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
fn set_bio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
match xous::send_message(
self.conn,
xous::Message::new_blocking_scalar(

View file

@ -333,7 +333,7 @@ pub fn setup_trng_input_pin<T: IoSetup + IoGpio>(iox: &T) -> u8 {
None,
Some(IoxDriveStrength::Drive2mA),
);
iox.set_pio_bit_from_port_and_pin(port, pin).expect("Couldn't allocate TRNG input pin")
iox.set_bio_bit_from_port_and_pin(port, pin).expect("Couldn't allocate TRNG input pin")
}
// sentinel used by test infrastructure to assist with parsing

View file

@ -253,7 +253,7 @@ impl Iox {
/// Returns the PIO bit that was enabled based on the port and pin specifier given;
/// returns `None` if the proposed mapping is invalid.
pub fn set_pio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
pub fn set_bio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
match port {
IoxPort::PA => None,
IoxPort::PB => {
@ -261,17 +261,17 @@ impl Iox {
None
} else {
self.set_alternate_function(port, pin, IoxFunction::AF1);
let pio_bit = 15 - pin;
self.csr.wo(iox::SFR_PIOSEL, self.csr.r(iox::SFR_PIOSEL) | (1 << pio_bit as u32));
Some(pio_bit)
let bio_bit = 15 - pin;
self.csr.wo(iox::SFR_PIOSEL, self.csr.r(iox::SFR_PIOSEL) | (1 << bio_bit as u32));
Some(bio_bit)
}
}
IoxPort::PC => {
if pin < 16 {
self.set_alternate_function(port, pin, IoxFunction::AF1);
let pio_bit = pin + 16;
self.csr.wo(iox::SFR_PIOSEL, self.csr.r(iox::SFR_PIOSEL) | (1 << pio_bit as u32));
Some(pio_bit)
let bio_bit = pin + 16;
self.csr.wo(iox::SFR_PIOSEL, self.csr.r(iox::SFR_PIOSEL) | (1 << bio_bit as u32));
Some(bio_bit)
} else {
None
}
@ -283,7 +283,7 @@ impl Iox {
/// Returns the PIO bit that was disabled based on the port and pin specifier given;
/// returns `None` if the proposed mapping is invalid. Does not change the AF mapping,
/// simply disables the bit in the PIO mux register.
pub fn unset_pio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
pub fn unset_bio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
match port {
IoxPort::PA => None,
IoxPort::PB => {
@ -377,8 +377,8 @@ impl IoSetup for Iox {
}
}
fn set_pio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
self.set_pio_bit_from_port_and_pin(port, pin)
fn set_bio_bit_from_port_and_pin(&self, port: IoxPort, pin: u8) -> Option<u8> {
self.set_bio_bit_from_port_and_pin(port, pin)
}
}