mirror of
https://github.com/saymrwulf/uhd.git
synced 2026-05-16 21:10:10 +00:00
224 lines
10 KiB
Python
224 lines
10 KiB
Python
#
|
|
# Copyright 2017 Ettus Research (National Instruments)
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
#
|
|
"""
|
|
LMK04828 driver for use with Magnesium
|
|
"""
|
|
|
|
import time
|
|
from ..chips import LMK04828
|
|
|
|
class LMK04828EISCAT(LMK04828):
|
|
"""
|
|
LMK04828 controls for EISCAT daughterboard
|
|
"""
|
|
def __init__(self, regs_iface, ref_clock_freq, slot=None):
|
|
LMK04828.__init__(self, regs_iface, slot)
|
|
self.log.trace("Using reference clock frequency {} MHz".format(ref_clock_freq/1e6))
|
|
if ref_clock_freq != 10e6:
|
|
error_msg = "Invalid reference clock frequency: {} MHz. " \
|
|
"Must be 10 MHz.".format(ref_clock_freq)
|
|
self.log.error(error_msg)
|
|
raise RuntimeError(error_msg)
|
|
self.ref_clock_freq = ref_clock_freq
|
|
self.init()
|
|
self.config()
|
|
|
|
def init(self):
|
|
"""
|
|
Basic init. Turns it on. Let's us read SPI.
|
|
"""
|
|
self.log.info("Reset LMK & Verify")
|
|
self.pokes8((
|
|
(0x000, 0x90), # Assert reset
|
|
(0x000, 0x10), # De-assert reset
|
|
(0x002, 0x00), # De-assert power down
|
|
(0x16E, 0x3B), # PLL2 Lock Detect Config as SDO
|
|
))
|
|
if not self.verify_chip_id():
|
|
raise Exception("Unable to locate LMK04828")
|
|
|
|
|
|
def config(self):
|
|
"""
|
|
Write lots of config foo.
|
|
"""
|
|
self.log.trace("LMK Initialization")
|
|
clkin0_r_divider = {10e6: 0x0A, 20e6: 0x14}[self.ref_clock_freq]
|
|
self.pokes8((
|
|
(0x100, 0x6C), # CLKout Config
|
|
(0x101, 0x66), # CLKout Config
|
|
(0x102, 0x66), # CLKout Config
|
|
(0x103, 0x00), # CLKout Config
|
|
(0x104, 0x20), # CLKout Config
|
|
(0x105, 0x00), # CLKout Config
|
|
(0x106, 0xF3), # CLKout Config
|
|
(0x107, 0x05), # CLKout Config
|
|
(0x108, 0x6C), # CLKout Config
|
|
(0x109, 0x67), # CLKout Config
|
|
(0x10A, 0x67), # CLKout Config
|
|
(0x10B, 0x00), # CLKout Config
|
|
(0x10C, 0x20), # CLKout Config
|
|
(0x10D, 0x00), # CLKout Config
|
|
(0x10E, 0x71), # CLKout Config
|
|
(0x10F, 0x05), # CLKout Config
|
|
(0x110, 0x6C), # CLKout Config
|
|
(0x111, 0x67), # CLKout Config
|
|
(0x112, 0x67), # CLKout Config
|
|
(0x113, 0x00), # CLKout Config
|
|
(0x114, 0x20), # CLKout Config
|
|
(0x115, 0x00), # CLKout Config
|
|
(0x116, 0x71), # CLKout Config
|
|
(0x117, 0x05), # CLKout Config
|
|
(0x118, 0x6C), # CLKout Config
|
|
(0x119, 0x67), # CLKout Config
|
|
(0x11A, 0x67), # CLKout Config
|
|
(0x11B, 0x00), # CLKout Config
|
|
(0x11C, 0x20), # CLKout Config
|
|
(0x11D, 0x00), # CLKout Config
|
|
(0x11E, 0x71), # CLKout Config
|
|
(0x11F, 0x05), # CLKout Config
|
|
(0x120, 0x78), # CLKout Config
|
|
(0x121, 0x66), # CLKout Config
|
|
(0x122, 0x66), # CLKout Config
|
|
(0x123, 0x00), # CLKout Config
|
|
(0x124, 0x20), # CLKout Config
|
|
(0x125, 0x00), # CLKout Config
|
|
(0x126, 0xF3), # CLKout Config
|
|
(0x127, 0x00), # CLKout Config
|
|
(0x128, 0x6C), # CLKout Config
|
|
(0x129, 0x55), # CLKout Config
|
|
(0x12A, 0x55), # CLKout Config
|
|
(0x12B, 0x00), # CLKout Config
|
|
(0x12C, 0x20), # CLKout Config
|
|
(0x12D, 0x00), # CLKout Config
|
|
(0x12E, 0xF9), # CLKout Config
|
|
(0x12F, 0x00), # CLKout Config
|
|
(0x130, 0x6C), # CLKout Config
|
|
(0x131, 0x67), # CLKout Config
|
|
(0x132, 0x67), # CLKout Config
|
|
(0x133, 0x00), # CLKout Config
|
|
(0x134, 0x20), # CLKout Config
|
|
(0x135, 0x00), # CLKout Config
|
|
(0x136, 0x71), # CLKout Config
|
|
(0x137, 0x01), # CLKout Config
|
|
(0x138, 0x10), # VCO_MUX to VCO 1; OSCout off
|
|
(0x139, 0x00), # SYSREF Source = MUX; SYSREF MUX = Normal SYNC
|
|
(0x13A, 0x01), # SYSREF Divide [12:8]
|
|
(0x13B, 0xE0), # SYSREF Divide [7:0]
|
|
(0x13C, 0x00), # SYSREF DDLY [12:8]
|
|
(0x13D, 0x08), # SYSREF DDLY [7:0] ... 8 is default, <8 is reserved
|
|
(0x13E, 0x00), # SYSREF Pulse Count = 1 pulse/request
|
|
(0x13F, 0x0B), # Feedback Mux: Enabled, DCLKout6, drives PLL1N divider
|
|
(0x140, 0x00), # POWERDOWN options
|
|
(0x141, 0x08), # Dynamic digital delay enable
|
|
(0x142, 0x00), # Dynamic digital delay step
|
|
(0x143, 0xD1), # SYNC edge sensitive; SYSREF_CLR; SYNC Enabled; SYNC fro
|
|
(0x144, 0x00), # Enable SYNC on all outputs including sysref
|
|
(0x145, 0x7F), # Always program to d127
|
|
(0x146, 0x08), # CLKin Type & En
|
|
(0x147, 0x0E), # CLKin_SEL = CLKin1 manual; CLKin1 to PLL1
|
|
(0x148, 0x01), # CLKin_SEL0 = input with pullup
|
|
(0x149, 0x01), # CLKin_SEL1 = input with pulldown
|
|
(0x14A, 0x02), # RESET type as input w/pulldown
|
|
(0x14B, 0x01), # Holdover & DAC Manual Mode
|
|
(0x14C, 0xF6), # DAC Manual Mode
|
|
(0x14D, 0x00), # DAC Settings (defaults)
|
|
(0x14E, 0x00), # DAC Settings (defaults)
|
|
(0x14F, 0x7F), # DAC Settings (defaults)
|
|
(0x150, 0x00), # Holdover Settings; bits 0/1 = '0' per long PLL1 lock time debug
|
|
(0x151, 0x02), # Holdover Settings (defaults)
|
|
(0x152, 0x00), # Holdover Settings (defaults)
|
|
(0x153, 0x00), # CLKin0_R divider [13:8], default = 0
|
|
(0x154, clkin0_r_divider), # CLKin0_R divider [7:0], default = d120
|
|
(0x155, 0x00), # CLKin1_R divider [13:8], default = 0
|
|
(0x156, 0x01), # CLKin1_R divider [7:0], default = d120
|
|
(0x157, 0x00), # CLKin2_R divider [13:8], default = 0
|
|
(0x158, 0x01), # CLKin2_R divider [7:0], default = d120
|
|
(0x159, 0x00), # PLL1 N divider [13:8], default = 0
|
|
(0x15A, 0x68), # PLL1 N divider [7:0], default = d120
|
|
(0x15B, 0xCF), # PLL1 PFD
|
|
(0x15C, 0x27), # PLL1 DLD Count [13:8]
|
|
(0x15D, 0x10), # PLL1 DLD Count [7:0]
|
|
(0x15E, 0x00), # PLL1 R/N delay, defaults = 0
|
|
(0x15F, 0x13), # Status LD1 pin = PLL2 LD, push-pull output
|
|
(0x160, 0x00), # PLL2 R divider [11:8];
|
|
(0x161, 0x01), # PLL2 R divider [7:0]
|
|
(0x162, 0x24), # PLL2 prescaler; OSCin freq
|
|
(0x163, 0x00), # PLL2 Cal = PLL2 normal val
|
|
(0x164, 0x00), # PLL2 Cal = PLL2 normal val
|
|
(0x165, 0x0C), # PLL2 Cal = PLL2 normal val
|
|
(0x171, 0xAA), # Write this val after x165
|
|
(0x172, 0x02), # Write this val after x165
|
|
(0x17C, 0x15), # VCo1 Cal; write before x168
|
|
(0x17D, 0x33), # VCo1 Cal; write before x168
|
|
(0x166, 0x00), # PLL2 N[17:16]
|
|
(0x167, 0x00), # PLL2 N[15:8]
|
|
(0x168, 0x0C), # PLL2 N[7:0]
|
|
(0x169, 0x51), # PLL2 PFD
|
|
(0x16A, 0x27), # PLL2 DLD Count [13:8] = default d32
|
|
(0x16B, 0x10), # PLL2 DLD Count [7:0] = default d0
|
|
(0x16C, 0x00), # PLL2 Loop filter r = 200 ohm
|
|
(0x16D, 0x00), # PLL2 loop filter c = 10 pF
|
|
(0x173, 0x00), # Do not power down PLL2 or prescaler
|
|
))
|
|
# TODO: change to Polling.
|
|
time.sleep(1.0) # Increased time to wait for DAC and VCXO to settle.
|
|
self.pokes8((
|
|
(0x182, 0x1), # Clear Lock Detect Sticky
|
|
(0x182, 0x0), # Clear Lock Detect Sticky
|
|
(0x183, 0x1), # Clear Lock Detect Sticky
|
|
(0x183, 0x0), # Clear Lock Detect Sticky
|
|
))
|
|
time.sleep(0.1)
|
|
if not self.check_plls_locked():
|
|
raise RuntimeError("At least one LMK PLL did not lock! Check the logs for details.")
|
|
self.log.trace("Setting SYNC and SYSREF config...")
|
|
self.pokes8((
|
|
(0x143, 0xF1), # toggle SYNC polarity to trigger SYNC event
|
|
(0x143, 0xD1), # toggle SYNC polarity to trigger SYNC event
|
|
(0x139, 0x02), # SYSREF Source = MUX; SYSREF MUX = pulser
|
|
(0x144, 0xFF), # Disable SYNC on all outputs including sysref
|
|
(0x143, 0x52), # Pulser selected; SYNC enabled; 1 shot enabled
|
|
))
|
|
self.log.info("LMK init'd and locked!")
|
|
|
|
def lmk_shift(self, num_shifts=0):
|
|
"""
|
|
Apply time shift
|
|
|
|
TODO: See if we can move this up to parent class
|
|
"""
|
|
ddly_value = 0x67 if num_shifts >= 0 else 0x65
|
|
self.pokes8((
|
|
(0x141, 0x4E), # Dynamic digital delay enable
|
|
(0x143, 0x53), # SYSREF_CLR; SYNC Enabled; SYNC from pulser @ regwrite
|
|
(0x139, 0x02), # SYSREF_MUX = Pulser
|
|
(0x109, ddly_value), # Set DDLY values for DCLKout2 +/-1 on low cnt.
|
|
# To Increment phase, write 0x65. Decrement = 0x67
|
|
(0x10A, ddly_value), # Hidden register. Write the same as previous based on inc/dec.
|
|
(0x111, ddly_value), # Set DDLY values for DCLKout4 +/-1 on low cnt
|
|
(0x112, ddly_value), # Hidden register. Write the same as previous based on inc/dec.
|
|
(0x119, ddly_value), # Set DDLY values for DCLKout6 +/-1 on low cnt
|
|
(0x11A, ddly_value), # Hidden register. Write the same as previous based on inc/dec.
|
|
(0x131, ddly_value), # Set DDLY values for DCLKout12 +/-1 on low cnt
|
|
(0x132, ddly_value), # Hidden register. Write the same as previous based on inc/dec.
|
|
(0x144, 0xB1), # Enable SYNC on outputs 2,4,6,12
|
|
))
|
|
for x in range(abs(num_shifts)):
|
|
self.poke8(0x142, 0x1)
|
|
self.poke8(0x144, 0xFF) # Disable SYNC on all outputs
|
|
|