David Raeman 76e004db07 n3xx: Add comments on clock_source=external,time_source=gpsdo ... It is, in principle, possible to use an external clock to synchronize N3x0 devices in frequency, and then use a GPSDO for a coarse time synchronization. This use case is deliberately not supported, as the GPSDO PPS signal and the external clock signal are by definition not matched, which will remove any guarantees on time/phase alignment. Because there are certain, niche use cases where the lack of phase alignment is acceptable, but only an external clock is available (no shared external PPS), usage of GPS for generating a PPS signal may be fine. This patch does not enable the usage of this combination out of the box, but adds comments and an update to the manual to explain the risks of this combination, and how to enable it (by patching MPM).		2024-02-21 06:40:57 -06:00
..
pyusrp_periphs	n310: Add frontend bandwidth control	2022-04-07 13:28:02 -07:00
tests	test: Correct sysref divider	2023-11-29 08:47:48 -06:00
usrp_mpm	n3xx: Add comments on clock_source=external,time_source=gpsdo	2024-02-21 06:40:57 -06:00
aurora_bist_test.py
CMakeLists.txt	debian: Update control and package building	2022-04-06 14:30:49 -07:00
copy_python_module.cmake	cmake: Update coding style to use lowercase commands	2018-11-14 14:10:09 -08:00
e320_bist	mpm: Fix units for DRAM BIST	2022-02-03 14:21:31 -06:00
n3xx_bist	mpm: n3xx: Recommend reboot USRP after BIST	2022-03-23 16:14:22 -05:00
setup.py.in	cmake: Add RegMaps build component to MPM	2021-03-01 15:57:01 -06:00
socket_test.py
test_lmk.py
usrp_hwd.py	mpm: Fix rpc process shared state and port argument positions	2022-10-20 10:12:21 -05:00
usrp_update_fs	mpm: Update usrp_update_fs to support X410	2021-07-08 00:05:43 -07:00
x4xx_bist	x4xx_bist: replace set_clock_source for x440	2023-09-06 10:09:36 -05:00