9c0dc99e9d
-Added test cases for the 184.32MHz clock rate. -Removed some extra test cases for 200MHz clock rate in order to cut down on test time. -Added DPDK test cases (copied from 10gige and 2x_10gige test cases). |
||
|---|---|---|
| .. | ||
| debs | ||
| dissectors | ||
| gr-usrptest | ||
| kitchen_sink | ||
| mega_fft | ||
| nirio_programmer | ||
| uhd_dump | ||
| uhd_txrx_debug_prints | ||
| README.md | ||
| usrp_x3xx_fpga_jtag_programmer.sh | ||
USRP™ Tools
This folder contains tools that are useful for working with and/or debugging your USRP™ device. Tools in this directory are not part of UHD. They are either stand-alone programs or software to be used in third-party applications.
For UHD™ software tools, look in uhd/host/utils.
List of Tools
__chdr-dissector/__
This is a packet dissector for Wireshark. It allows you to view the details of a Compressed HeaDeR (CHDR) formatted-packet in Wireshark. The USRP™ B2xx and X3xx use the CHDR format.
__uhd_dump/__
This tool can be used with tcpdump to make sense of packet dumps from your
network-connected USRP™ device.
__usrp_x3xx_fpga_jtag_programmer.sh__
This tool is to be used with the USRP™ X300 and X310 devices. It allows you to
program the X3x0 FPGA via JTAG. Note that loading the FPGA image via JTAG does
not store the FPGA in the on-device flash storage. Thus, as soon as you
cycle power, the image will be lost. To permanently burn an FPGA image, please
refer to uhd/host/utils/usrp_x3xx_fpga_burner.
This tool requires that Xilinx iMPACT has been installed on your system.
__kitchen_sink__
This is a debugging tool designed to test and stress connections to USRP devices.