No functional changes. Fixes for things that PyLint complains about, but
are safe to change anyway, as well as a minor improvement to a docstring
that referenced non-existant args.
This touches files that are mpm.conf-related.
The pca953x driver introduced a change for how the "label" property
populates. Instead of using the device model, it gives a device specific
name. As a replacement, use device/name. This affects the tca6424
and tca6408.
For the kernel change that causes this see:
5128f8d445
Though this information is also returned via usrp_probe, it can be
useful to provide this information to trackers which scrape the
get_device_info RPC call.
The dboard information is split up and cast to string just to
simplify parsing on the receiving end.
The N310 has a feature that allows the front panel GPIOs to be driven by
various sources: The PS, or any of the radio channels. The MPM-based
APIs did not expose any way to change that.
Changes:
- Add MPM APIs to PeripheralManagerBase and n3xx classes
- Improve comments and explanations
- Add host-side hooks into these new APIs in mpmd_mb_controller
- Implement these APIs for N3xx
The N3xx devices will have the option to set the GPIO source to "PS", or
to one of "RF0", "RF1", "RF2", "RF3" (if there are four channels; the
N300 and N320 can only go up to RF1).
Note: The N310 radio does not have separate FP-GPIO banks for channels
0 and 1, which needs to be fixed in a separate commit.
- ref_locked failure would throw a warning, even though this can happen
in normal operations, and the return value of the get_ref_locked()
function is all the info needed
- get_fpga_type() doesn't need to be called from e31x_periphs, because
it is not read from the motherboard registers (is read from the
EEPROM)
The clock source on E310 is always internal. This patch removes the
variables regarding the clock source (since they are superfluous). This
fixes a bug where self._clock_source on the e31x class would never get
initialized.
- Remove superfluous INFO logging
- Improve formatting in many places
- Improve Pylint score in various places
- Add tear_down to DB object
- Simplify custom EEPROM code for E310
- Fix time source selection code
- Remove references to GPS_CTRL and GPS_STATUS (are E320 only)
- Move clock source control out of MboardRegs object
Many small cleanups:
- Fix copyright headers
- Fix superfluous imports
- Pull some constants out of classes where appropriate
- Fix formatting
- Improve/fix some docstrings
- Disable specific Pylint warnings where appropriate
- Global catches use BaseException instead of Exception
- Don't use len() for empty checks
- Make sure to declare all self attributes in __init__ (note: this is
particularly of interest for E310, becuase its regular init happens
outside of __init__)
- Compacted some E310 code that had multi-DB checks
This assumes an existence of mboard_regs_control in PeriphManagerBase
and implements most TK controls there. All the *_periphs.py files can
now use a common class for registers, including the TK access, but also
git hash, build date, and device ID access.
This also fixes two issues:
- set_timekeeper_time() and set_tick_period() had a bug that would
incorrectly calculate the upper 32 bits of their respective registers.
- N3xx had a bug that would swap around set time now and next PPS. This
got auto-fixed because the common code never had this bug.
Provides a more useful error message if the EEPROM cannot be found at
the specified address. Without this change a generic index out of range
error is raised.
Signed-off-by: michael-west <michael.west@ettus.com>
Some close-in noise was observed on TX when using external references.
This change reduces the noise by changing U19 to select the GPSDO when
references are set to external. Also included is a change to properly
read and apply settings from the configuration file. This allows the
user to further quiet the transmission by adding 'enable_gps=False' to
the configuration file in order to power off the GPSDO.
Signed-off-by: Michael West <michael.west@ettus.com>
When using enable_gps=0, the power to the LTE-Lite GPS chip is turned
off, and neither the reference sources (time/clock) nor the
location/time data (via gpsd) can be used.
This commit disables the gpsdo options for the set_time_source,
set_clock_source, and set_sync_source when enable_gps=0 is used, and
adds logging to inform the user about this.
This behaviour is consistent with X310, where `gpsdo` is only a valid
reference if the GPSDO module is plugged in.
The manual was also updated accordingly.
This value should be 9 to correspond with the rev J motherboards.
This property was renamed to mboard_last_rev_compat in a previous commit.
But mboard_max_rev is actually a more accurate description,
since it specifies the latest hardware revision that the software
is aware of. I renamed all references back to mboard_max_rev.
- Fixes a case where the e320 would be unable to lock to an external 10 MHz
reference
- Previously, calling set_time_source would set the reference clock source to
internal as a side effect
Newer revisions of the E320 and N3xx motherboards use EEPROM version 3,
and store a rev_compat field. The rev_compat is the last revision that
this hardware is compatible with. We now use that instead of simply the
revision.
- Turns the E310 into an MPM device (like N3xx, E320)
- Factor out common code between E320 and E310, maximize sharing between
the two devices
- Remove all pre-MPM E310 code that is no longer needed
- Modify MPM to remove all existing overlays before applying new ones
(this is necessary to enable idle image mode for E310)
Co-authored-by: Virendra Kakade <virendra.kakade@ni.com>
Signed-off-by: Virendra Kakade <virendra.kakade@ni.com>
The N320 has FPGA types (XQ, AQ) which cannot be derived from the mboard
regs in the same way as the non-QSFP variants. We therefore bite the
bullet and hardcode those.
Issue: Current code loads FPGA too early while many
essential peripherals such as net clocks are not brought up.
This change will make sure those are got init before FPGA loaded.
Signed-off-by: Trung Tran<trung.tran@ettus.com>
Add an argument to the UDP xport_mgr to adjust the xport sorting. This
enables Rhodium to use a different limit from Magnesium. Previously, the
sorting method would overload a link with both of Rhodium's higher-rate
streams.
Previously, the init() procedure of the n3xx class passed either
the user-provided or the default clock_source and time_source values
to initialize the clocking configuration.
When the user did not provide these parameters, the default values
were assigned, overriding whatever configuration the device was
previously initialized with. Therefore, a dboard reinit was forced
when the currently configured state of the N3xx device did not match
the default configuration (i.e. internal sources).
Now, the init() procedure still provides the clock_source and
time_source values; but, if the user does not provide the
parameters, the previously used values are assigned (i.e.
self._clock_source and/or self._time_source).
By the time MPM runs this n3xx init() procedure for the first time,
both self._clock_source and self._time_source have been initialized
with the default internal values anyways in the
_init_ref_clock_and_time() procedure.
This change prevents additional, unnecessary calls to the
set_sync_source() procedure, which ultimately causes a daughterboard
reinitialization when either a new clock or time source is requested.
