### Description
Upgrade cutlass to 3.5 to fix build errors using CUDA 12.4 or 12.5 in
Windows
- [x] Upgrade cutlass to 3.5.0.
- [x] Fix flash attention build error with latest cutlass header files
and APIs. This fix is provided by @wangyems.
- [x] Update efficient attention to use new cutlass fmha interface.
- [x] Patch cutlass to fix `hrsqrt` not found error for sm < 53.
- [x] Disable TF32 Staged Accumulation to fix blkq4_fp16_gemm_sm80_test
build error for cuda 11.8 to 12.3.
- [x] Disable TRT 10 deprecate warnings.
The following are not included in this PR:
* TRT provider replaces the deprecated APIs.
* Fix blkq4_fp16_gemm_sm80_test build error for cuda 12.4 or 12.5. This
test is not built by default unless you add `--cmake_extra_defines
onnxruntime_ENABLE_CUDA_EP_INTERNAL_TESTS=ON` in build command.
To integrate to rel-1.18.1: Either bring in other changes (like onnx
1.16.1), or generate manifest and upload a new ONNX Runtime Build Time
Deps artifact based on rel-1.18.1.
### Motivation and Context
https://github.com/microsoft/onnxruntime/issues/19891https://github.com/microsoft/onnxruntime/issues/20924https://github.com/microsoft/onnxruntime/issues/20953
# Description
This PR removes the building of the ORT "mobile" packages and much of the associated infrastructure which is no longer needed.
Not removed yet - tools/ci_build/github/android/mobile_package.required_operators.config and the helper scripts that depend on it.
# Motivation and Context
The mobile packages were deprecated in 1.18. Users should use the full packages (Android - onnxruntime-android, iOS - onnxruntime-c/onnxruntime-objc) instead or do a custom build.
Some dev environments come with a preinstalled abseil. For example,
conda users often do that. If the preinstalled abseil version is
incompatible with what we have in cmake/deps.txt, it could result in a
hard-to-understand build error. This PR adds a version check to improve
that.
### Description
This PR upgrades CUDA 11 build pipelines' GCC version from 8 to 11.
### Motivation and Context
GCC8 has an experimental std::filesystem implementation which is not ABI
compatible with the formal one in later GCC releases. It didn't cause
trouble for us, however, ONNX community has encountered this issue much.
For example, https://github.com/onnx/onnx/issues/6047 . So this PR
increases the minimum supported GCC version from 8 to 9, and removes the
references to GCC's "stdc++fs" library. Please note we compile our code
on RHEL8 and RHEL8's libstdc++ doesn't have the fs library, which means
the binaries in ONNX Runtime's official packages always static link to
the fs library. It is just a matter of which version of the library, an
experimental one or a more mature one. And it is an implementation
detail that is not visible from outside. Anyway, a newer GCC is better.
It will give us the chance to use many C++20 features.
#### Why we were using GCC 8?
It is because all our Linux packages were built on RHEL8 or its
equivalents. The default GCC version in RHEL8 is 8. RHEL also provides
additional GCC versions from RH devtoolset. UBI8 is the abbreviation of
Red Hat Universal Base Image 8, which is the containerized RHEL8. UBI8
is free, which means it doesn't require a subscription(while RHEL does).
The only devtoolset that UBI8 provides is GCC 12, which is too new for
being used with CUDA 11.8. And our CUDA 11.8's build env is a docker
image from Nvidia that is based on UBI8.
#### How the problem is solved
Almalinux is an alternative to RHEL. Almalinux 8 provides GCC 11. And
the CUDA 11.8 docker image from Nvidia is open source, which means we
can rebuild the image based on Almalinux 8 to get GCC 11. I've done
this, but I cannot republish the new image due to various complicated
license restrictions. Therefore I put them at an internal location in
onnxruntimebuildcache.azurecr.io.
### Description
Changes the `onnxruntime_NVCC_THREADS` CMake variable from an
[`option`](https://cmake.org/cmake/help/latest/command/option.html) to a
[cache
entry](https://cmake.org/cmake/help/latest/command/set.html#set-cache-entry).
### Motivation and Context
Fixes#19833.
`option` in CMake (confusingly, IMHO) always defines a *boolean* option.
The original definition of `onnxruntime_NVCC_THREADS` specified a
default of `1`, which I presume is coerced to `ON`. Thus, if the option
is not overridden with a value of another type, NVCC will receive a
malformed option `--threads ON` (rather than the expected `--threads
1`), which causes the error reported in #19833.
This error only occurred if compiling ONNX Runtime via CMake with
`-Donnxruntime_USE_CUDA=ON`; the CI build script always overrode
`onnxruntime_NVCC_THREADS` with a string value:
f1fef19b6e/tools/ci_build/build.py (L1152-L1154)
The workspace usage may be hardware-specific. Moving away from a common workspace size calculation allows more flexibility in the hardware-specific implementations.
### Flash attn recompute
1. Allow PythonOp(FlashAttn) can be recomputed correctly.
45879ff5c2
2. Use JSON to pass the selected-to-recompute subgraphs.
3c374da678
#### Better Memory Efficiency
Customer model can run both PyTorch SPDA and Flash Attn, this PR make it
possible to let the Flash Attn path work with ORTModule layerwise
recompute. The peak drop from 45.xGB to 32.xGB if we only compare the
layers (not including other pieces, BTW there are few more optimization
targeting other pieces as well later).
#### Better Perf
Using Flash ATTN bring additionally 16% end to end time reduction, with
highly aligned loss curve.
#### Use JSON File to pass Recompute Plans
To overcome the limitation of max length of the strings defined in
session options.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
### Description
This PR make numbers of optimizations to onnxruntime-web's module export
and deployment.
See each section below for more details.
#### Preview
>
[onnxruntime-web@1.19.0-esmtest.20240513-a16cd2bd21](https://www.npmjs.com/package/onnxruntime-web/v/1.19.0-esmtest.20240513-a16cd2bd21)
> ~~onnxruntime-web@1.19.0-esmtest.20240430-c7edbcc63d~~
> ~~onnxruntime-web@1.18.0-esmtest.20240428-624c681c83~~
> ~~onnxruntime-web@1.18.0-esmtest.20240411-1abb64e894~~
<details>
<summary><h4>Breaking changes</h4></summary>
There is no code change required, but there are a few differences
regarding **code import**, **flags**, **bundler config** and
**deployment steps**.
#### Importing:
Import table is changed. See following for details.
<details>
<summary><h5>Current import table:</h5></summary>
| Target Name | Path for "import" or "require" | WebGL | JSEP | wasm |
Proxy | Training |
|------|-----|-----|-----|-----|-----|-----|
| `ort` (default) | `onnxruntime-web` | ✔️ | ❌ | ✔️ | ✔️ | ❌ |
| `ort.all` | `onnxruntime-web/experimental` | ✔️ | ✔️ | ✔️ | ✔️ | ❌ |
| `ort.node` | `onnxruntime-web` | ❌ | ❌ | ✔️ | ❌ | ❌ |
| `ort.training` | `onnxruntime-web/training` | ❌ | ❌ | ✔️ |
✔️<sup>\[1]</sup> | ✔️ |
| `ort.wasm` | `onnxruntime-web/wasm` | ❌ | ❌ | ✔️ | ✔️ | ❌ |
| `ort.wasm-core` | `onnxruntime-web/wasm-core` | ❌ | ❌ | ✔️ | ❌ | ❌ |
| `ort.webgl` | `onnxruntime-web/webgl` | ✔️ | ❌ | ❌ | ✔️<sup>\[2]</sup>
| ❌ |
| `ort.webgpu` | `onnxruntime-web/webgpu` | ❌ | ✔️ | ✔️ | ✔️ | ❌ |
* [1] didn't test. may not actually work.
* [2] not working. this is a mistake in build config.
</details>
<details>
<summary><h5>Proposed update:</h5></summary>
| Target Name | Path for "import" or "require" | WebGL | JSEP | wasm |
Proxy | Training |
|------|-----|-----|-----|-----|-----|-----|
| `ort` (default) | `onnxruntime-web` | ✔️ | ❌ | ✔️ | ✔️ | ❌ |
| `ort.all` |
~~`onnxruntime-web/experimental`~~<br/>`onnxruntime-web/all` | ✔️ | ✔️ |
✔️ | ✔️ | ❌ |
| `ort.node` | `onnxruntime-web` | ❌ | ❌ | ✔️ | ❌ | ❌ |
| `ort.training` | `onnxruntime-web/training` | ❌ | ❌ | ✔️ | ✔️ | ✔️ |
| `ort.wasm` | `onnxruntime-web/wasm` | ❌ | ❌ | ✔️ | ✔️ | ❌ |
| ~~`ort.wasm-core`~~ | ~~`onnxruntime-web/wasm-core`~~ | ~~❌~~ | ~~❌~~
| ~~✔️~~ | ~~❌~~ | ~~❌~~ |
| `ort.webgl` | `onnxruntime-web/webgl` | ✔️ | ❌ | ❌ | ~~✔️~~ ❌ | ❌ |
| `ort.webgpu` | `onnxruntime-web/webgpu` | ❌ | ✔️ | ✔️ | ✔️ | ❌ |
</details>
#### Flags:
The following flags are deprecated:
- `env.wasm.simd` (boolean): will be ignored. SIMD is always enabled in
build.
The following flags changed their type:
- `env.wasm.wasmPaths`: When using this flag as a string ( for the URL
prefix ), nothing is changed. When using this flag as an object ( for
per-file path override ), the type changed:
```diff
- export interface Old_WasmFilePaths{
- 'ort-wasm.wasm'?: string;
- 'ort-wasm-threaded.wasm'?: string;
- 'ort-wasm-simd.wasm'?: string;
- 'ort-training-wasm-simd.wasm'?: string;
- 'ort-wasm-simd-threaded.wasm'?: string;
- };
+ export interface New_WasmFilePaths {
+ /**
+ * Specify the override path for the main .wasm file.
+ *
+ * This path should be an absolute path.
+ *
+ * If not modified, the filename of the .wasm file is:
+ * - `ort-wasm-simd-threaded.wasm` for default build
+ * - `ort-wasm-simd-threaded.jsep.wasm` for JSEP build (with WebGPU and
WebNN)
+ * - `ort-training-wasm-simd-threaded.wasm` for training build
+ */
+ wasm?: URL|string;
+ /**
+ * Specify the override path for the main .mjs file.
+ *
+ * This path should be an absolute path.
+ *
+ * If not modified, the filename of the .mjs file is:
+ * - `ort-wasm-simd-threaded.mjs` for default build
+ * - `ort-wasm-simd-threaded.jsep.mjs` for JSEP build (with WebGPU and
WebNN)
+ * - `ort-training-wasm-simd-threaded.mjs` for training build
+ */
+ mjs?: URL|string;
+ }
```
#### Bundler compatibility:
Config changes are need for bundlers. See usage example in
/js/web/test/e2e/ for Webpack, parcel and rollup.
#### Deployment:
- if consuming from a CDN, there is no breaking change.
- if consuming from a local server, need to copy all `ort-*.wasm` and
`ort-*.mjs` files (totally 6 files) in the dist folder. (previously only
need to copy `ort-*.wasm` files.)
</details>
<details>
<summary><h4>Problems</h4></summary>
There are a few problems with the current module export and deployment:
- Script URL cannot be correctly inferred when imported as ESM.
- Workers are forcefully encoded using Blob URL, which makes
onnxruntime-web not working in CSP environment and Node.js, when using
proxy or multi-threading feature.
- Generated JS code (by Emscripten) is encoded using
`function.toString()`, which is unstable and error-prone.
- When running with a different Emscripten build, always need the build
step. Making it difficult to swap artifacts in deveopment/debug.
</details>
<details>
<summary><h4>Goals</h4></summary>
- Full ESM support
- Support variances of ways to import. Including:
- import from HTML's `<script>` tag (IIFE format, exporting to global
variable `ort`)
```html
<script
src="https://example.com/cdn-path-to-onnxruntime-web/dist/ort.min.js"></script>
```
- import from source code inside `<script type="module">` tag (ESM)
```html
<script type="module">
import * as ort from
"https://example.com/cdn-path-to-onnxruntime-web/dist/ort.min.mjs";
// using 'ort'
</script>
```
- import in a CommonJS project (CJS format, resolve from package.json
"exports" field)
```js
// myProject/main.js
const ort = require('onnxruntime-web');
```
- import in an ESM project (ESM format, resolve from package.json
"exports" field)
```js
// myProject/main.js (or main.mjs)
import * as ort from 'onnxruntime-web';
```
- Support popular bundlers when importing onnxruntime-web into a CJS/ESM
project.
- webpack (esm requires extra post-process step)
- rollup
- parcel (esm requires extra post-process step)
- More bundlers **TBD**
- Multi-threading support for Node.js
NOTE: keeping single JavaScript file (the all-in-one bundle) is no
longer a goal. This is because technically there is a conflict with the
other requirements.
</details>
<details>
<summary><h4>Important Design Decisions</h4></summary>
- Drop support of single JavaScript output.
- The current onnxruntime-web distribution uses a single JavaScript file
to include all code. While there are a few benefits, it also creates
problems as mentioned above. Since ESM is being used more and more
widely, and browsers are making more restricted security checks and
requirement, the old Blob based solution is going to be replaced.
- To achieve the requirement, specifically, the CSP environment support,
we have to offer a non Blob based solution. Therefore, we have to
distribute multiple files and drop the single file solution.
- Do not run parser/postprocess on Emscripten generated JavaScript.
- Emscripten is evolving quickly so we should only depends on what's in
its documentation instead of a certain implementation details. (for
example, currently we patch on its code to deal with a special variable
`_scriptDir`)
- Keep the generated files as-is also helps to:
- reduce the size of ort.min.js
- make it easier to replace build artifacts when in development/debug
- Drop support for non-SIMD and non-MultiThread. This helps to reduce
the number of artifacts in distribution.
- (fixed-sized) SIMD is supported in any mainstream JS environment.
- Multi-thread as WebAssembly feature is supported in any mainstream JS
environment. In some environment the feature is guarded with cross
origin policy, but it can still work if not trying to create any worker.
- Use ESM output for Emscripten generated JavaScript.
- There are 2 ways to dynamically import classic (umd) modules and
neither of them are recommended:
- dynamically creating a <script> tag. This changes the HTML structure
and have quite a lot of compatibility issue
- use `fetch()` and `eval()`. However `eval` is strongly suggested to be
avoid because there is a great perf hit.
- importing ESM is super easy - just use the `import()` call.
Considering ESM is widely supported in modern browsers and Node.js this
is the better option.
- Add Blob based solution as a fallback for cross-origin workers.
- There are still wide use case of importing onnxruntime-web from CDN.
In this usage, make it able create worker by using `fetch()`+`Blob` to
create a same-origin Blob URL.
</details>
<details>
<summary><h4>Distribution File Manifest</h4></summary>
The distribution folder contains the following files:
- WebAssembly artifacts. These files are the result of compiling the
ONNX Runtime C++ code to WebAssembly by Emscripten.
| File Name | Build Flags |
|------|-----|
| ort-wasm-simd-threaded.mjs <br/> ort-wasm-simd-threaded.wasm |
`--enable_wasm_simd` <br/> `--enable_wasm_threads` |
| ort-training-wasm-simd-threaded.mjs <br/>
ort-training-wasm-simd-threaded.wasm | `--enable_training_apis` <br/>
`--enable_wasm_simd` <br/> `--enable_wasm_threads` |
| ort-wasm-simd-threaded.jsep.mjs <br/> ort-wasm-simd-threaded.jsep.wasm
| `--enable_wasm_simd` <br/> `--enable_wasm_threads` <br/> `--use_jsep`
<br/> `--use_webnn` |
- onnxruntime-web JavaScript artifacts. These files are generated by
ESBuild as the entry point for onnxruntime-web.
There are multiple build targets for different use cases:
| Target Name | Path for "import" or "require" | Description |
|------|-----|-----|
| `ort` | `onnxruntime-web` | The default target. |
| `ort.all` | `onnxruntime-web/all` | The target including webgl. |
| `ort.node` | `onnxruntime-web` | The default target for Node.js. |
| `ort.training` | `onnxruntime-web/training` | The target including
training APIs |
| `ort.wasm` | `onnxruntime-web/wasm` | The target including only
WebAssembly (CPU) EP |
| `ort.webgl` | `onnxruntime-web/webgl` | The target including only
WebGL EP |
For each target, there are multiple files generated:
| File Name | Description |
|------|-----|
| [target].js | The entry point for the target. IIFE and CommonJS
format. |
| [target].mjs | The entry point for the target. ESM format. |
| [target].min.js <br/> [target].min.js.map | The entry point for the
target. Minimized with sourcemap. IIFE and CommonJS format. |
| [target].min.mjs <br/> [target].min.mjs.map | The entry point for the
target. Minimized with sourcemap. ESM format. |
| [target].proxy.mjs | (if appliable) The proxy ESM module for the
target. |
| [target].proxy.min.mjs <br/> [target].proxy.min.mjs.map | (if
appliable) The proxy ESM module for the target. Minimized with
sourcemap. |
</details>
<details>
<summary><h4>Dynamic Import Explained</h4></summary>
- Local Served | No Proxy:
```
[Bundle or ort.min.js]
|
+ import()--> [ort-wasm-simd-threaded.mjs]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
|
+ new Worker()--> [ort-wasm-simd-threaded.mjs (worker)]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
```
- Local Served | Proxy:
```
[Bundle or ort.min.js]
|
+ import()--> [ort.proxy.min.mjs]
|
+ new Worker()--> [ort.proxy.min.mjs (worker)]
|
+ import()--> [ort-wasm-simd-threaded.mjs]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
|
+ new Worker()--> [ort-wasm-simd-threaded.mjs (worker)]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
```
- Cross Origin | No Proxy:
```
[Bundle or ort.min.js]
|
+ fetch('ort-wasm-simd-threaded.mjs')
|
+ URL.createObjectURL(res.blob())
|
+ import()--> [blob:... (ort-wasm-simd-threaded)]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
|
+ new Worker()--> [blob:... (ort-wasm-simd-threaded) (worker)]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
```
- Cross Origin | Proxy
```
[Bundle or ort.min.js]
|
+ fetch('ort.proxy.min.mjs')
|
+ URL.createObjectURL(res.blob())
|
+ import()--> [blob:... (ort.proxy)]
|
+ new Worker()--> [blob:... (ort.proxy) (worker)]
|
+ fetch('ort-wasm-simd-threaded.mjs')
|
+ URL.createObjectURL(res.blob())
|
+ import()--> [blob:... (ort-wasm-simd-threaded)]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
|
+ new Worker()--> [blob:... (ort-wasm-simd-threaded) (worker)]
|
+ WebAssembly.instantiateStreaming()--> [ort-wasm-simd-threaded.wasm]
```
</details>
### Description
Add support for using Onnx Runtime with Node
### Motivation and Context
Onnx Runtime supports the QNN HTP, but does not support it for Node.js.
This adds baseline support for the Onnx Runtime to be used with Node.
Note it does not update the node packages that are distributed
officially. This simply patches the onnxruntime.dll to allow 'qnn' to be
used as an execution provider.
Testing was done using the existing onnxruntime-node package. The
`onnxruntime.dll` and `onnxruntime_binding.node` were swapped into
`node_modules\onnxruntime-node\bin\napi-v3\win32\arm64` with the newly
built version, then the various QNN dlls and .so files were placed next
to the onnxruntime.dll. Testing was performed on a variety of models and
applications, but the easiest test is to modify the [node quickstart
example](https://github.com/microsoft/onnxruntime-inference-examples/tree/main/js/quick-start_onnxruntime-node).
### Description
<!-- Describe your changes. -->
Currently figuring out if the protobuf dependency is building protoc it
is a little obtuse and inconsistent
* in some places we directly set protobuf_BUILD_PROTOC_BINARIES to OFF
to indicate the protobuf dependency is not building protoc
* e.g. macOS/iOS/visionOS builds
* for a user provided protoc path we don't set
protobuf_BUILD_PROTOC_BINARIES, and inside protobuf_function.cmake that
determines if `protobuf::protoc` is added as a dependency or not
*
0dda8b0c44/cmake/external/protobuf_function.cmake (L40-L45)
To be more consistent/explicit, set protobuf_BUILD_PROTOC_BINARIES to
OFF when ONNX_CUSTOM_PROTOC_EXECUTABLE set and valid.
Remove outdated script that built and external protoc binary which was
used in later builds. The build setup will fetch a pre-built protoc so
there's no need for this additional build.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
Make it easier to figure out if protoc is coming from the protobuf
dependency.
Made some changes to the arm64x.cmake script to:
- handle edge case
- Enable Projects that include onnxruntime as submodule and build it, to
be able to build as x without causing onnxruntime build_as_x to fail.
### Description
<!-- Describe your changes. -->
This branch is based on rel-1.18.0 and supports TensorRT 10-GA.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
### Description
Add CUDA implementation for block sparse attention for Phi-3-small.
Block sparse attention was proposed in [Sparse
Transformers](https://arxiv.org/pdf/1904.10509) by OpenAI, and also
adopted in [BigBird](https://arxiv.org/pdf/2007.14062) with different
sparse layout.
In Phi-3-small, the sparse layout is static, and works with
unidirectional (causal) attention.
Compared to dense attention, the benefit of block sparse is to speed up
both training and inference. It could save memory thus support longer
context length.
- [x] Add operator spec and shape inference
- [x] Symbolic shape inference
- [x] Refactor GroupQueryAttention to expose common kernels for kv cache
concatenation, q/k/v transpose etc.
- [x] Add cuda kernel to convert block mask to CSR format
- [x] Add cuda kernel to generate position ids
- [x] Add compile script and template files to convert triton kernel to
cubin and dispatcher.
- [x] Add triton kernel v1 for prompt
- [x] Add triton kernel v2 for token generation and support padding
- [x] Update IO Binding Helper to allow buffer sharing.
- [x] Test relevance
- [x] Test performance
### Performance
Test in A100-SXM4-80GB with `batch_size=4, num_heads=32,
max_seq_len=8192, head_size=128, sparse_block_size=64, local_blocks=16,
vert_stride=8, num_layout=8`
We compare sparse attention to corresponding GQA with local attention
windows size 1024, or GQA with dense causal.
Average latency in milliseconds (for fused attention kernel used in
prompt prefilling):
seq_len | GQA-Dense | GQA-Local | SparseAttention
-- | -- | -- | --
64 | 0.0465 | 0.0722 | 0.0641
128 | 0.0618 | 0.0787 | 0.0672
256 | 0.1086 | 0.1076 | 0.0943
512 | 0.2535 | 0.2487 | 0.1676
1024 | 0.7042 | 0.7050 | 0.3800
2048 | 2.4125 | 1.9316 | 0.8966
4096 | 8.9346 | 4.5699 | 2.1129
8192 | 40.5401 | 10.3508 | 5.1748
Average latency in milliseconds (for fused attention kernel used in
token generation:
past_seq_len | GQA-Dense | GQA-Local | SparseAttention
-- | -- | -- | --
64 | 0.0186 | 0.0186 | 0.0870
128 | 0.0408 | 0.0466 | 0.1165
256 | 0.0530 | 0.0592 | 0.0988
512 | 0.0445| 0.0447 | 0.1150
1024 | 0.0634 | 0.0640 | 0.1454
2048 | 0.1027 | 0.0637 | 0.1589
4096 | 0.1789 | 0.0631 | 0.1806
8192 | 0.3288 | 0.0655 | 0.2146
We can see that the kernel for token generation still have room to
improve.
#### Limitations
Only support right-side padding and unidirectional attention.
The following are not supported in the first version:
(1) Packed mode like PackedMultiHeadAttention where input has been
removed padding.
(2) paged attention.
(3) bidirectional attention.
(4) GPU compute capacity that is not 8.0, 8.6 and 8.9.
(5) Left side padding.
Some of these limitations will be removed in the future (may be in a new
operator).
In CMakeLists.txt:set_msvc_c_cpp_compiler_warning_level(), the regex should match the value that gets added by the function. The latter got updated, so this change updates the former to match.
### Description
<!-- Describe your changes. -->
[VitisAI] Solve the problem that gsl cannot be found when compiling
under linux
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
Co-authored-by: Zhenze Wang <zhenzew@xilinx.com>
### Description
Fix the build error for Win ARM64 Release build.
graph_transform_test.cc(1,1): error C1128: number of sections exceeded
object file format limit: compile with /bigobj
[D:\build\Windows\Release\onnxruntime_test_all.vcxproj]
### Motivation and Context
Fix issue: https://github.com/microsoft/onnxruntime/issues/20406
For TensorRT 10 GA onwards, the TensorRT libraries will have major
version appended to the end on Windows, for example, nvinfer_10.dll,
nvinfer_plugin_10.dll, nvonnxparser_10.dll ...
Change cmake file accordingly.
### Description
<!-- Describe your changes. -->
This PR supports a build of onnxruntime.xcframework for xros/xrsimulator
for visionos via the build command of
`python3 tools/ci_build/github/apple/build_apple_framework.py --config
Release/Debug
tools/ci_build/github/apple/default_vision_os_framework_build_settings.json`.
For officially include visionos in ios cocoapods package and testing in
CI, would require separate work for upgrading the Xcode version &
upgrade macOS CI agent to macos-13-arm64 or higher.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
visionos support:
https://github.com/microsoft/onnxruntime/discussions/19313
---------
Co-authored-by: rachguo <rachguo@rachguos-Mini.attlocal.net>
Co-authored-by: rachguo <rachguo@rachguos-Mac-mini.local>
### Description
<!-- Describe your changes. -->
Add ability to store initializer data in an external file.
Update training checkpoint code to use external file if data > ~2GB.
I don't see a way for the flatbuffers 64-bit offsets to be used, as they
don't support storing 'table' types with 64-bit offsets (and our Tensor
is a 'table' type not a simple struct).
0cfb7eb80b/tests/64bit/test_64bit.fbs (L38-L39)
Allowing a Tensor to have its raw_data in an external file should
hopefully work with the least friction. As it's an extra field it's
backwards compatible.
Please feel free to suggest alternative approaches.
Side note: the diffs in the generated *.fbs.h files are unexpectedly
large. Maybe they weren't re-generated when the new flatbuffers version
was checked in. I updated by running:
`python .\compile_schema.py -f <build output
dir>\_deps\flatbuffers-build\Debug\flatc.exe`
from onnxruntime\core\flatbuffers\schema which I thought was the correct
way but maybe that's out of date.
I think you can ignore all the diffs in the generated files and just
worry about the changes to the .fbs files in
onnxruntime/core/flatbuffers/schema. Basically start at the bottom of
the files changed and work up as all the 'real' diffs are there.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
---------
Co-authored-by: carzh <wolfivyaura@gmail.com>
### Description
These changes include
Support to OpenVINO 2024.1
Import PreCompiled Blobs with EPContext Blob
Separate Device/Precision as input
Deprecate CPU_FP32 , GPU_FP32 terminology , introduce CPU, GPU
AUTO GPU, CPU will only create GPU Blob and not CPU Blob.
### Motivation and Context
- OpenVINO 2024.1 will be out soon
- Import Precompiled Blob can greatly reduce FEIL/FIL Time.
- Separating Device/Precision will make the input cleaner
-
---------
Co-authored-by: Suryaprakash Shanmugam <suryaprakash.shanmugam@intel.com>
Co-authored-by: Preetha Veeramalai <preetha.veeramalai@intel.com>
### Description
<!-- Describe your changes. -->
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
I am prefiring this change to pre-run the non-dml checks, and also to
give folks the time to review it before DML gets released. When DML 1.14
officially releases, we'll only need to run the DML pipeline to
automatically pick up the nuget package. This should save us some
valuable time.
Note that DML 1.14 is the release needed for ORT 1.17.4, and DML 1.15
will come soon after.
### Description
Introducing a new class ORTPipelineModule to handle wrapping layers in
DeepSpeed pipeline parallel.
### Motivation and Context
To support pipeline parallelism on ORTModule.
This PR will include an initial support of deepspeed Pipeline
parallelism.
- [x] Support Pipeline parallel where layers are nn Modules in
Sequential.
- [ ] Support LayerSpec and TiedLayerSpec
- [ ] Enable partitioning to accept List
- [ ] Full-GPU Graph Consolidation
- [ ] Subgraph Merging for Inference
### Description
This fixes following things:
- Expose `ENABLE_NPU_ADAPTER_ENUMERATION` macro via build command, so
that a user can enable NPU support for DML EP seamlessly.
- Add keyword `_dmlEp_` as part of the node name, which would be useful
for debugging purpose.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
This adds a new "Graph Capture" option to the DML ep, similar to the
cuda graph functionality. Here's how graph capture works:
- A user can enable graph capture in the session options by setting
`ep.dml.enable_graph_capture` to `true`
- When they want to capture a run, they set `gpu_graph_id` in their
`RunOptions` to a number bigger than 0 (0 is reserved for internal use
according to the cuda graph documentation).
- Then, when they start the inference, the graph will be captured and
stored in the DML EP for future use
- When they execute the run for a second time with the same id, the
`ReplayGraph` function in the DML EP will be called instead of executing
the kernels, resulting in very low overhead and avoiding kernel
recompilation.
This feature can give up-to-par or even better performance than
specifying the static dimensions at session creation time, but is also
much more flexible.
### Description
- Adds a patch that fixes a shape inference bug that caused a segfault:
https://github.com/onnx/onnx/pull/6080
- Fix documentation describing why QLinearMatMul tests are currently
being skipped.
### Motivation and Context
The [PR for integrating with ONNX
1.16.0](https://github.com/microsoft/onnxruntime/pull/19745) disabled
various python quantization tests due to a shape inference bug. This PR
applies the ONNX fix as a patch. We still can't enable the tests because
some of our CIs pip install onnx-1.16.0, which doesn't include the fix.
copy QNN deps when building python bindings as well.
tweak the wildcard to only copy QNN related files. latest sdk from
Qualcomm (>= 2.21) also include SNPE dll's which we don't want to
include.
### Description
update with ONNX 1.16.0 branch according to
https://github.com/microsoft/onnxruntime/blob/main/docs/How_To_Update_ONNX_Dev_Notes.md
ONNX 1.16.0 release notes:
https://github.com/onnx/onnx/releases/tag/v1.16.0
#### Updated ops for CPU EP:
- DequantizeLinear(21)
- Added int16 and uint16 support + various optimizer tests
- Missing int4 and uint4 support
- Missing block dequantization support
- QuantizeLinear(21)
- Added int16 and uint16 support + various optimizer tests
- Missing int4 and uint4 support
- Missing block quantization support
- Cast(21)
- Missing int4 and uint4 support
- CastLike(21)
- Missing int4 and uint4 support
- ConstantOfShape(21)
- Missing int4 and uint4 support
- Identity(21)
- Missing int4 and uint4 support
- If(21)
- Missing int4 and uint4 support
- Loop(21)
- Missing int4 and uint4 support
- Reshape(21)
- Missing int4 and uint4 support
- Scan(21)
- Missing int4 and uint4 support
- Shape(21)
- Missing int4 and uint4 support
- Size(21)
- Missing int4 and uint4 support
- Flatten(21)
- Missing float8e4m3fnuz, float8e5m2, float8e5m2fnuz, int4, and uint4
support
- Pad(21)
- Missing float8e4m3fnuz, float8e5m2, float8e5m2fnuz, int4, and uint4
support
- Squeeze(21)
- Missing float8e4m3fnuz, float8e5m2, float8e5m2fnuz, int4, and uint4
support
- Transpose(21)
- Missing float8e4m3fnuz, float8e5m2, float8e5m2fnuz, int4, and uint4
support
- Unsqueeze(21)
- Missing float8e4m3fnuz, float8e5m2, float8e5m2fnuz, int4, and uint4
support
#### Unimplemented opset 21 features/ops
- int4 and uint4 data type
- QLinearMatMul(21)
- GroupNormalization(21)
- ai.onnx.ml.TreeEnsemble(5)
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
### Disabled tests
#### ORT Training
orttraining/orttraining/test/python/orttraining_test_ort_apis_py_bindings.py
- test_ort_custom_ops: Potential shape inference bug for custom ops
#### Python quantization unit tests
test/onnx/python/quantization (shape inference bug)
- test_op_conv_transpose.py: test_quantize_conv_transpose_u8u8_fp16
- test_op_conv_transpose.py: test_quantize_conv_transpose_s8s8_fp16
- test_op_gemm.py: test_quantize_qop_gemm_s8s8
- test_op_gemm.py: test_quantize_qop_gemm_e4m3fn_same
- test_op_gemm.py: test_quantize_qop_gemm_e4m3fn_p3
- test_op_matmul.py: test_quantize_matmul_u8u8_f16
- test_op_matmul.py: test_quantize_matmul_s8s8_f16
- test_op_matmul.py: test_quantize_matmul_s8s8_f16_entropy
- test_op_matmul.py: test_quantize_matmul_s8s8_f16_percentile
- test_op_matmul.py: test_quantize_matmul_s8s8_f16_distribution
- test_op_relu.py: test_quantize_qop_relu_s8s8
#### ONNX tests
- test_maxpool_2d_ceil_output_size_reduce_by_one: ONNX 1.16.0 fixed a
maxpool output size bug and added this test. Enable this test when [ORT
PR](https://github.com/microsoft/onnxruntime/pull/18377) is merged.
Refer to original [ONNX PR](https://github.com/onnx/onnx/pull/5741).
- test_ai_onnx_ml_tree_ensemble_set_membership_cpu: new unimplemented op
ai.onnx.ml.TreeEnsemble
- test_ai_onnx_ml_tree_ensemble_single_tree_cpu: same
- test_ai_onnx_ml_tree_ensemble_set_membership_cuda: same
- test_ai_onnx_ml_tree_ensemble_single_tree_cuda: same
- test_cast_INT4_to_FLOAT_cpu: ORT Cast(21) impl doesn't support int4
yet
- test_cast_INT4_to_INT8_cpu: same
- test_cast_UINT4_to_FLOAT_cpu: same
- test_cast_UINT4_to_UINT8_cpu: same
- test_cast_INT4_to_FLOAT_cuda
- test_cast_INT4_to_INT8_cuda
- test_cast_UINT4_to_FLOAT_cuda
- test_cast_UINT4_to_UINT8_cuda
- test_constantofshape_float_ones_cuda: ConstantOfShape(21) not
implemented for cuda
- test_constantofshape_int_shape_zero_cuda: same
- test_constantofshape_int_zeros_cuda: same
- test_flatten_axis0_cuda: Flatten(21) not implemented for cuda
- test_flatten_axis1_cuda: same
- test_flatten_axis2_cuda: same
- test_flatten_axis3_cuda: same
- test_flatten_default_axis_cuda: same
- test_flatten_negative_axis1_cuda: same
- test_flatten_negative_axis2_cuda: same
- test_flatten_negative_axis3_cuda: same
- test_flatten_negative_axis4_cuda: same
- test_qlinearmatmul_2D_int8_float16_cpu: QLinearMatMul(21) for onnx not
implemented in ORT yet
- test_qlinearmatmul_2D_int8_float32_cpu: same
- test_qlinearmatmul_2D_uint8_float16_cpu: same
- test_qlinearmatmul_2D_uint8_float32_cpu: same
- test_qlinearmatmul_3D_int8_float16_cpu: same
- test_qlinearmatmul_3D_int8_float32_cpu: same
- test_qlinearmatmul_3D_uint8_float16_cpu: same
- test_qlinearmatmul_3D_uint8_float32_cpu: same
- test_qlinearmatmul_2D_int8_float16_cuda: same
- test_qlinearmatmul_2D_int8_float32_cuda: same
- test_qlinearmatmul_2D_uint8_float16_cuda: same
- test_qlinearmatmul_2D_uint8_float32_cuda: same
- test_qlinearmatmul_3D_int8_float16_cuda: same
- test_qlinearmatmul_3D_int8_float32_cuda: same
- test_qlinearmatmul_3D_uint8_float16_cuda: same
- test_qlinearmatmul_3D_uint8_float32_cuda: same
- test_size_cuda: Size(21) not implemented for cuda
- test_size_example_cuda: same
- test_dequantizelinear_blocked: Missing implementation for block
dequant for DequantizeLinear(21)
- test_quantizelinear_blocked_asymmetric: Missing implementation for
block quant for QuantizeLinear(21)
- test_quantizelinear_blocked_symmetric: Missing implementation for
block quant for QuantizeLinear(21)
---------
Signed-off-by: liqunfu <liqun.fu@microsoft.com>
Signed-off-by: Ganesan Ramalingam <grama@microsoft.com>
Co-authored-by: Ganesan Ramalingam <grama@microsoft.com>
Co-authored-by: George Wu <jywu@microsoft.com>
Co-authored-by: adrianlizarraga <adlizarraga@microsoft.com>
### Description
For C++ standards >= 20, use `std::chrono::operator<<` in place of
`date::operator<<` to fix ambiguous operator compile error.
### Motivation and Context
The external dependency HowardHinnant/date has a conflict with
std::chrono for >=C++20.
Solves #20137
### How to run it locally
1. conda install ninja
2. "C:\Program Files\Microsoft Visual
Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
3. python.exe {ort_repo}\tools\ci_build\build.py --config RelWithDebInfo
--build_dir {ort_repo}\build_cuda --skip_submodule_sync --build_csharp
--update --parallel --cmake_generator "Ninja" --build_shared_lib
--enable_onnx_tests --enable_pybind --build_java --build_nodejs
--use_cuda "--cuda_home=C:\Program Files\NVIDIA GPU Computing
Toolkit\CUDA\v11.8" --enable_cuda_profiling --cmake_extra_defines
CMAKE_CUDA_ARCHITECTURES=60
4. cd build_cuda\RelWithDebInfo
5. cmake --build . j16
### Motivation and Context
In packaging pipelines, we often come across a random issue that the
building with CUDA on Windows takes too much time.
Although it has been reduced much by moving the building to the CPU
machine.
We're planning to build with Ninja instead of msbuild in Packaging
pipelines, thus, nvcc can run parallelly.
It's the first step to support it locally.
### Description
Enable NPUs supporting DXCORE_ADAPTER_ATTRIBUTE_D3D12_GENERIC_ML and
D3D_FEATURE_LEVEL_1_0_GENERIC with DML EP. This also begins ingesting DX
headers through the DirectX-Headers repo.
Note that this includes an update to cgamanifest.json for onnx-tensorrt
which is triggered during re-generation due to a prior changes to
deps.txt.
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
### Description
<!-- Describe your changes. -->
1. Introduce latest cutlass extension from TRTLLM that gives us cutlass
upgrade(to 3.4) opportunity from MoE side.
2. Fix Windows build issue
3. Add Int4 MoE op and ut
### Motivation and Context
<!-- - Why is this change required? What problem does it solve?
- If it fixes an open issue, please link to the issue here. -->
### Description
Address build issues and source code discrepancies.
Fix cuda_test_provider gtest argument stack corruption.
### Motivation and Context
`OpTester` class that is widely used for kernel testing is not
suitable for testing internal classes for EPs that are built as shared
objects.
Currently, CUDA EP tests run only on Linux.
We want to enable testing and developments on Windows,
and create a usable pattern for testing of other EPs internals.
Alternatives considered:
Abstracting EP unit tests into separate test executable such as
`onnxruntime_test_all`.
This alternative was rejected as it would create a lot more changes in
the established patterns,
and potentially interfere with CUDA functionality with more complex
source code maintanence.
