* optimize python overhead of _post_amp_backward
* overwrite apex amp's zero_grad for faster implementation
* move unscale_fp16_grads_into_fp32_grads into C++ impl
* improve the efficiency furthur, reducing 3.5ms to 1.7ms for unilm.
* unilm 1.7ms to 338us: 1). optimize python list <==> std::vector copy, 2). launch the kernels as long as num_elem reach thresh hold. This help reduce the CUDA idel time.
* refine the logic a bit after validating
Co-authored-by: Baiju Meswani <bmeswani@microsoft.com>
* Expose symbols in onnx and protobuf namespaces in python when building with --enable_external_custom_op_schemas
* Add external onnx and protobuf files to wheel
* Added an example to demonstrate external custom ops use-case
* Added a Linux build pipeline to test external custom ops
This change adds a new pipeline for checking Python code. Currently this pipeline only runs flake8.
flake8 is also run as part of the CMake project builds, but we can switch over completely to the new pipeline later.
The .flake8 config file was also updated to make it easier to run standalone (flake8 --config ./.flake8) and some Python formatting issues were addressed in files that were not previously scanned.
ORTModule requires two PyTorch CPP extensions that are currently JIT compiled. The runtime compilation can cause issues in some environments without all build requirements or in environments with multiple instances of ORTModule running in parallel
This PR creates a custom command to compile such extensions that must be manually executed before ORTModule is executed for the first time. When users try to use ORTModule before the extensions are compiled, an error with instructions are raised
PyTorch CPP Extensions for ORTModule can be compiled by running:
python -m onnxruntime.training.ortmodule.torch_cpp_extensions.install
Full build environment is needed for this
Numpy has binary compatibility, which means "binaries compiled against a given version of NumPy will still run correctly with newer NumPy versions, but not with older versions." So, if an onnx runtime package was built with numpy version A, then at run time it requires numpy version >=A. In this change, we read numpy version from the installed packages at build time, to avoid manually keeping the build time/runtime consistency.
1. Update manylinux build scripts. This will add [PEP600](https://www.python.org/dev/peps/pep-0600/)(manylinux2 tags) support. numpy has adopted this new feature, we should do the same. The old build script files were copied from https://github.com/pypa/manylinux, but they has been deleted and replaced in the upstream repo. The manylinux repo doesn't have a manylinux2014 branch anymore. So I'm removing the obsolete code, sync the files with the latest master.
2. Update GPU CUDA version from 11.0 to 11.1(after a discussion with PMs).
3. Delete tools/ci_build/github/linux/docker/Dockerfile.manylinux2014_cuda10_2. (Merged the content to tools/ci_build/github/linux/docker/Dockerfile.manylinux2014_cuda11)
4. Modernize the cmake code of how to locate python devel files. It was suggested in https://github.com/onnx/onnx/pull/1631 .
5. Remove `onnxruntime_MSVC_STATIC_RUNTIME` and `onnxruntime_GCC_STATIC_CPP_RUNTIME` build options. Now cmake has builtin support for it. Starting from cmake 3.15, we can use `CMAKE_MSVC_RUNTIME_LIBRARY` cmake variable to choose which MSVC runtime library we want to use.
6. Update Ubuntu docker images that used in our CI build from Ubuntu 18.04 to Ubuntu 20.04.
7. Update GCC version in CUDA 11.1 pipelines from 8.x to 9.3.1
8. Split Linux GPU CI pipeline to two jobs: build the code on a CPU machine then run the tests on another GPU machines. In the past we didn't test our python packages. We only tested the pre-packed files. So we didn't catch the rpath issue in CI build.
9. Add a CentOS machine pool and test our Linux GPU build on real CentOS machines.
10. Rework ARM64 Linux GPU python packaging pipeline. Previously it uses cross-compiling therefore we must static link to C Runtime. But now have pluggable EP API and it doesn't support static link. So I changed to use qemu emulation instead. Now the build is 10x slower than before. But it is more extensible.
* First iteration of making cuda a shared provider.
Separated out shared OpKernel change, so doing this to merge with that change.
* More cuda shared library refactoring
* More cuda shared library refactoring
* More build options tested, converted the training ops over.
* Fix merge breaks
* Fix submodules
* Fix submodules
* Fix submodules
* Fix python
* Fix compile errors
* Duplicate symbol fix
* Test fix for ROCM provider
* Another ROCM test workaround
* ROCM Build Test
* ROCM build fix
* ROCM
* ROCM
* ROCM
* ROCM
* ROCM
* ROCM test
* Reduce header dependencies
* Remove redundant namespace
* Test fix for linux
* Fix linux build
* Fix Eigen build error
* Fix unused parameter warning
* Test link error
* Another linker test
* Linker test
* Linker test
* Another test
* Another build test
* Fix linux link error
* Build test
* Fix control flow ops to use common base class with core code
* Remove extra qualifiers
* Fix template syntax for linux
* Fix cuda memory leak
* Fix pybind
* Test disabling cast
* Cleanup
* Restore cuda in test
* Remove more header dependencies
* Test not adding cuda provider to session
* Make GetProviderInfo_CUDA throw
* No-op cuda provider creation
* Fix some setup issues
* Fix memory cleanup on unload
* Diagnostics
* Don't unload library
* Add diagnostics
* Fix deleting registry at right time.
* Test disabling profiler
* Fix merge break
* Revert profiler change
* Move unloading of shared providers into Environment
* Free more global allocations before library unloads
* Add more diagnostics
* Move unloading back to the OrtEnv as there are multiple Environments created during a session.
Remove some library dependencies for tests.
* Fix more cmake files
* ERROR -> WARNING
* Fix python shutdown
* Test not using dml in pipeline
* Change python version and disable dml
* Update python version
* Test adding unload method for shared providers
* Disable DLL test
* Python test
* Revert "Python test"
This reverts commit c7ec2cfe98.
* Revert "Disable DLL test"
This reverts commit e901cb93aa.
* Revert "Test adding unload method for shared providers"
This reverts commit c427b78799.
* Point to RyanWinGPU
* Revert python version
* Fix id_to_allocator_map
* Another python exit test
* Remove extra debug messages
Try a more clean python shutdown through DllMain
* Revert DllMain idea, it didn't work
* Merge conflicts
* Fix merge with master issues.
* Comments
* Undo edit to file
* Cleanup + new training ops
* Revert yml changes
* Fix another merge error
* ROCM fix
* ROCM fix v2
* Put back Linux hack, it is necessary
* Stupid fixes
* Fix submodule out of sync
* ROCM fix 3
* ROCM 4
* Test java fix
* Fix typos
* Java test on my VM
* Fix build error
* Spotless fix
* Leave temp file around to load properly
* Fix cleanup on exit
* Fix break
* Java comments
* Remove LongformerAttentionBase workaround
* Spotless fix
* Switch yml back to regular build pool
* Revert "Switch yml back to regular build pool"
This reverts commit be35fc2a5a.
* Code review feedback
* Fix errors due to merge
* Spotless fix
* Fix minimal build
* Java fix for non cuda case
* Java fix for CPU build
* Fix Nuphar?
* Fix nuphar 2
* Fix formatting
* Revert "Remove LongformerAttentionBase workaround"
This reverts commit 648679b370.
* Training fix
* Another java fix
* Formatting
* Formatting
* For orttraining
* Last orttraining build fix...
* training fixes
* Fix test provider error
* Missing pass command
* Removed in wrong spot
* Python typo
* Python typos
* Python crash on exit, possibly due to unloading of libraries.
* Remove test_execution_provider from training build
Only enable python atexit on windows
Remove assert on provider library exit
* Still can't unload providers in python, alas.
* Disable Nvtx temporarily
* MPI Kernels for Training
* MPI Kernels part 2
* Patch through INcclService
* Oops, wrong CMakeLists
* Missing namespace
* Fix missing ()
* Move INcclService::GetInstance around to link nicer
* Missing }
* Missing MPI libraries for Cuda
* Add extra GetType functions used by MPI
* Missing Nccl library
* Remove LOGS statements as a test
* Add in a couple more missing GetType methods
* Update comments
* Missed a logging reference in mpi_context.h
* Convert aten_op to shared (due to marge with master)
* Test moving DistributedRunContext instance into shared provider layer
(with purpose error to verify it's being built properly)
* Test passed, now with fix
* Missing static
* Oops, scope DistributedRunContext to just NCCL
* Merge related issues and code review feedback.
* Merge error
* Bump to rel-1.9.1 (#7684)
* Formatting
* Code review feedback for Java build on non Windows
* Remove cupti library dependency from core library
* Test Java pipeline fix
* Linux build fix
* Revert "Linux build fix"
This reverts commit a73a811516.
* Revert "Remove cupti library dependency from core library"
This reverts commit 6a889ee8bf.
* Packaging pipeline fixes to copy cuda shared provider for tensorrt & standard packages
* Add cuda to Tensorrt nuget package
* onnxruntime_common still has a cuda header dependency
Co-authored-by: ashbhandare <ash.bhandare@gmail.com>
* Include ORT format model conversion scripts and infrastructure in ORT python package.
- tweak existing script setup so it can be easily run directly and from the ORT python package
Add config file and readme for Android minimal build package
Update ORT Mobile doco
Disable warning if 'all' optimizations are enabled but NCHWc transformer is excluded (device specific optimizations don't apply in this scenario so the warning is moot).
* Address PR comments
* first attempt rocm training wheel
* modifications needed to python packaging pipeline for Rocm 4.1
* changges to not conflict with cuda
missed stage1 changes
remove package push
add option r to getopt
try again without python install
try again without python install
try again without python install
split pipelines and add back push to remote storage
try on cuda gpu pool
try again
try again
try running without az subscription set
try again on original pipeline
change pool
passing AMD Rocm whl on AMD-GPU pool
split rocm pipeline from cuda pipeline
remove comments
* try adding Rocm tests as well
* try with tests in place
* fix trailing ws
* add training data
* try again as root for tests
* use python3
* typo
* try to map video, render group into container
* try again
* try again
* try to avoid yum error code
* make UID 1001
* try without yum downgrade
* define rocm_version=None
* remove CUDA related comments for Rocm Dockerfile
* Dont pin nightly torch torchvision torchtext versions as they expire (for now nightly is required for Rocm 4.1)
* missed requirements-rocm.txt from last commit
* fix whitespace
* Add missing Python dependencies for training
cerberus - option parsing
h5py - checkpoint
onnx - model proto
packaging/sympy - symbolic shape inference
* Separate requirements.txt for inference and training Python packages.
* Code refactor
* Modify code to tackle OOM when calibrating on larget dataset
* Fix mismatch issue when setting keepdims on ReduceMin/ReduceMax
* Add COCO val 2017 annotation
* Fix mismatch issue when setting keepdims on ReduceMin/ReduceMax
* Fix bug of "No module named:onnxruntime.quantization.CalTableFlatBuffers"
* Check and install flatbuffers module
* Add script to donwload coco dataset image and refactor example
* Fix bug of "No module
named:onnxruntime.quantization.CalTableFlatBuffers"
* Add CalTableFaltBuffers as module
* Remove annotation, user can download by themselves.
* Uncommet code
* Add back instances_val2017.json
* Make sure flatbuffers installed when ORT is installed
* Refactor code to call coco api
* Enable FP16 for example
* Remove nGraph Execution Provider
Pursuant to nGraph deprecation notice: https://github.com/microsoft/onnxruntime/blob/master/docs/execution_providers/nGraph-ExecutionProvider.md#deprecation-notice
**Deprecation Notice**
| | |
| --- | --- |
| Deprecation Begins | June 1, 2020 |
| Removal Date | December 1, 2020 |
Starting with the OpenVINO™ toolkit 2020.2 release, all of the features
previously available through nGraph have been merged into the OpenVINO™
toolkit. As a result, all the features previously available through
ONNX RT Execution Provider for nGraph have been merged with ONNX RT
Execution Provider for OpenVINO™ toolkit.
Therefore, ONNX RT Execution Provider for **nGraph** will be deprecated
starting June 1, 2020 and will be completely removed on December 1,
2020. Users are recommended to migrate to the ONNX RT Execution Provider
for OpenVINO™ toolkit as the unified solution for all AI inferencing on
Intel® hardware.
* Remove nGraph Licence info from ThirdPartyNotices.txt
* Use simple Test.Run() for tests without EP exclusions
To be consistent with rest of test code.
* Remove nGraph EP functions from Java code
Improve quantization tools:
1. Support QAT
2. Make quantization tool to register Operators.
3. Make the API clear to use
Co-authored-by: t-yguo <t-yguo@microsoft.com>
* Add ORTTrainerOptions class for the new pytorch frontend (#4382)
Add ORTTrainerOptions class and some placeholders
* Add _ORTTrainerModelDesc to perform validation for model description (#4416)
* Add Loss Scaler classes to the new frontend (#4306)
* Add TrainStepInfo used on the new frontend API (#4256)
* Add Optimizer classes to the new frontend (#4280)
* Add LRScheduler implementation (#4357)
* Add basic ORTTrainer API (#4435)
This PR presents the public API for ORTTrainer for the short term
development.
It also validates and saves input parameters, which will be used in the
next stages, such as building ONNX model, post processing the model and
configuring the training session
* Add opset_version into ORTTrainerOptions and change type of ORTTrainer.loss_fn (#4592)
* Update ModelDescription and minor fix on ORTTrainer ctor (#4605)
* Update ModelDescription and minor fix on ORTTrainer/ORTTrainerOptions
This PR keeps the public API intact, but changes how model description is stored on the backend
Currently, users creates a dict with two lists of tuples.
One list called 'inputs' and each tuple has the following format tuple(name, shape).
The second list is called 'outputs' and each tuple can be either tuple(name, shape) or tuple(name, shape, is_loss).
With this PR, when this dict is passed in to ORTTrainer, it is fully validated as usual.
However, tuples are internally replaced by namedtuples and all output tuples will have
tuple(name, shape, is_loss) format instead of is_loss being optionally present.
Additionally to that normalization in the internal representation (which eases coding),
two internal methods were created to replace a namedtuple(name, shape) to namedtuple(name, shape, dtype)
or namedtuple(name, shape, is_loss, dtype) dependeing whether the tuple is an input or output.
This is necessary as ORTTRainer finds out data types of each input/output during model export to onnx.
Finally, a minor fix was done on ORTTrainer. It could initialize ORTTrainerOptions incorrectly when options=None
* Rename input name for test
* Add ONNX Model Export to New Frontend (#4612)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
Co-authored-by: Thiago Crepaldi <thiago.crepaldi@microsoft.com>
* Create training session + minor improvements (#4668)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
* Save ONNX model in file (#4671)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
* Add eval step (#4674)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
* Add train_step (#4677)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
* Add LR Scheduler (#4694)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
Co-authored-by: Thiago Crepaldi <thiago.crepaldi@microsoft.com>
* Add deterministic compute tests (#4716)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
Co-authored-by: Thiago Crepaldi <thiago.crepaldi@microsoft.com>
* Add legacy vs experimental ORTTrainer accuracy comparison (#4727)
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
Co-authored-by: Thiago Crepaldi <thiago.crepaldi@microsoft.com>
* Add Mixed precision/LossScaler + several fixes (#4739)
Additionally to the mixed precision/loss scaler code, this PR includes:
* Fix CUDA training
* Add optimization_step into TrainStepInfo class
* Refactor LRSCheduler to use optimization_step instead of step
* Updated several default values at ORTTrainerOptions
* Add initial Gradient Accumulation supported. Untested
* Fix ONNX model post processing
* Refactor unit tests
* Add ONNX BERT example + minor fixes (#4757)
* Fix training issue when passing ONNX file into ORTTrainer
Co-authored-by: Thiago Crepaldi <thiago.crepaldi@microsoft.com>
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
* Add Dynamic Shape support (#4758)
* Update DeepSpeed Zero Stage option to a separate option group (#4772)
* Add support to fetches (#4777)
* Add Gradient Accumulation Steps support (#4793)
* Fix Dynamic Axes feature and add unit test (#4795)
* Add frozen weights test (#4807)
* Move new pytorch front-end to 'experimental' namespace (#4814)
* Fix build
Co-authored-by: Rayan-Krishnan <rayankrishnan@live.com>
Co-authored-by: Rayan Krishnan <t-rakr@OrtDevTest2v100.af05slrtruoetgaxwwjv5nsq5e.px.internal.cloudapp.net>
1. Publish the image ACR, instead of building it every time for every PR
2. Make USE_MKLML and USE_OPENMP be able to co-exist. Currently both of them are enabled in our Linux CI build but indeed only one of them is taking effect.
3. Split nuphar and DNNL to separated pipelines.
4. Fix two warnings in onnxruntime/core/optimizer/matmul_scale_fusion.cc and onnxruntime/test/tvm/tvm_basic_test.cc.
5. Update the manylinux2010_x86_64 image to the latest.
* test
* test
* add missing CUDA header include
* debug
* fix
* fix python package for dnnl and tensorrt.
* fix
* fix windows build.
* revert
* target_link_directories for tensorrt shared lib.
