mirror of
https://github.com/saymrwulf/litex-boards.git
synced 2026-07-25 19:37:44 +00:00
00ff61baa9
rst was not directly assigned/used on reset_less clock domains, so reset_less property was not really useful. With the changes on stream.CDC, having a rst (Even fixed at 0) is now mandatory on clock domains involved in the CDC, so this also fixes targets.
182 lines
8.5 KiB
Python
Executable file
182 lines
8.5 KiB
Python
Executable file
#!/usr/bin/env python3
|
|
|
|
#
|
|
# This file is part of LiteX-Boards.
|
|
#
|
|
# Copyright (c) 2021 Hans Baier <hansfbaier@gmail.com>
|
|
# SPDX-License-Identifier: BSD-2-Clause
|
|
#
|
|
# Note: The CPU actually runs at over 100MHz, but the SDRAM only works up to 75MHz
|
|
|
|
from migen import *
|
|
|
|
from litex.build.io import DDROutput
|
|
|
|
from litex_boards.platforms import qmtech_5cefa2
|
|
|
|
from litex.soc.cores.clock import CycloneVPLL
|
|
from litex.soc.integration.soc_core import *
|
|
from litex.soc.integration.builder import *
|
|
from litex.soc.cores.led import LedChaser
|
|
|
|
from litedram.modules import W9825G6KH6
|
|
from litedram.phy import GENSDRPHY, HalfRateGENSDRPHY
|
|
|
|
from litex.soc.cores.video import VideoVGAPHY
|
|
from liteeth.phy.mii import LiteEthPHYMII
|
|
|
|
# CRG ----------------------------------------------------------------------------------------------
|
|
|
|
class _CRG(Module):
|
|
def __init__(self, platform, sys_clk_freq, with_ethernet, with_vga, sdram_rate="1:1"):
|
|
self.rst = Signal()
|
|
self.clock_domains.cd_sys = ClockDomain()
|
|
|
|
if sdram_rate == "1:2":
|
|
self.clock_domains.cd_sys2x = ClockDomain()
|
|
self.clock_domains.cd_sys2x_ps = ClockDomain()
|
|
else:
|
|
self.clock_domains.cd_sys_ps = ClockDomain()
|
|
|
|
if with_ethernet:
|
|
self.clock_domains.cd_eth = ClockDomain()
|
|
|
|
if with_vga:
|
|
self.clock_domains.cd_vga = ClockDomain()
|
|
|
|
# # #
|
|
|
|
# Clk / Rst
|
|
clk50 = platform.request("clk50")
|
|
|
|
# PLL
|
|
self.submodules.pll = pll = CycloneVPLL(speedgrade="-C8")
|
|
self.comb += pll.reset.eq(self.rst)
|
|
pll.register_clkin(clk50, 50e6)
|
|
pll.create_clkout(self.cd_sys, sys_clk_freq)
|
|
if sdram_rate == "1:2":
|
|
pll.create_clkout(self.cd_sys2x, 2*sys_clk_freq)
|
|
# theoretically 90 degrees, but increase to relax timing
|
|
pll.create_clkout(self.cd_sys2x_ps, 2*sys_clk_freq, phase=180)
|
|
else:
|
|
# for 105 MHz: 10; 95 MHz: 15; 85MHz: 30 work
|
|
pll.create_clkout(self.cd_sys_ps, sys_clk_freq, phase=10)
|
|
|
|
if with_ethernet:
|
|
pll.create_clkout(self.cd_eth, 25e6)
|
|
if with_vga:
|
|
pll.create_clkout(self.cd_vga, 40e6)
|
|
|
|
# SDRAM clock
|
|
sdram_clk = ClockSignal("sys2x_ps" if sdram_rate == "1:2" else "sys_ps")
|
|
self.specials += DDROutput(1, 0, platform.request("sdram_clock"), sdram_clk)
|
|
|
|
# BaseSoC ------------------------------------------------------------------------------------------
|
|
|
|
class BaseSoC(SoCCore):
|
|
def __init__(self, sys_clk_freq=int(105e6), with_daughterboard=False,
|
|
with_ethernet=False, with_etherbone=False, eth_ip="192.168.1.50", eth_dynamic_ip=False,
|
|
with_led_chaser=True, with_video_terminal=False, with_video_framebuffer=False,
|
|
sdram_rate="1:1", **kwargs):
|
|
platform = qmtech_5cefa2.Platform(with_daughterboard=with_daughterboard)
|
|
|
|
# SoCCore ----------------------------------------------------------------------------------
|
|
SoCCore.__init__(self, platform, sys_clk_freq,
|
|
ident = "LiteX SoC on QMTECH 5CEFA2" + (" + Daughterboard" if with_daughterboard else ""),
|
|
**kwargs)
|
|
|
|
# CRG --------------------------------------------------------------------------------------
|
|
self.submodules.crg = _CRG(platform, sys_clk_freq,
|
|
with_ethernet = with_ethernet or with_etherbone,
|
|
with_vga = with_video_terminal or with_video_framebuffer,
|
|
sdram_rate = sdram_rate)
|
|
|
|
# SDR SDRAM --------------------------------------------------------------------------------
|
|
if not self.integrated_main_ram_size:
|
|
sdrphy_cls = HalfRateGENSDRPHY if sdram_rate == "1:2" else GENSDRPHY
|
|
self.submodules.sdrphy = sdrphy_cls(platform.request("sdram"), sys_clk_freq)
|
|
self.add_sdram("sdram",
|
|
phy = self.sdrphy,
|
|
module = W9825G6KH6(sys_clk_freq, sdram_rate),
|
|
l2_cache_size = kwargs.get("l2_size", 8192)
|
|
)
|
|
|
|
# Ethernet / Etherbone ---------------------------------------------------------------------
|
|
if with_ethernet or with_etherbone:
|
|
self.submodules.ethphy = LiteEthPHYMII(
|
|
clock_pads = self.platform.request("eth_clocks"),
|
|
pads = self.platform.request("eth"))
|
|
if with_ethernet:
|
|
self.add_ethernet(phy=self.ethphy, dynamic_ip=eth_dynamic_ip)
|
|
if with_etherbone:
|
|
self.add_etherbone(phy=self.ethphy, ip_address=eth_ip)
|
|
|
|
# Video ------------------------------------------------------------------------------------
|
|
if with_video_terminal or with_video_framebuffer:
|
|
self.submodules.videophy = VideoVGAPHY(platform.request("vga"), clock_domain="vga")
|
|
if with_video_terminal:
|
|
self.add_video_terminal(phy=self.videophy, timings="800x600@60Hz", clock_domain="vga")
|
|
if with_video_framebuffer:
|
|
self.add_video_framebuffer(phy=self.videophy, timings="800x600@60Hz", clock_domain="vga")
|
|
|
|
# Leds -------------------------------------------------------------------------------------
|
|
if with_led_chaser:
|
|
self.submodules.leds = LedChaser(
|
|
pads = platform.request_all("user_led"),
|
|
sys_clk_freq = sys_clk_freq)
|
|
|
|
# Build --------------------------------------------------------------------------------------------
|
|
|
|
def main():
|
|
from litex.soc.integration.soc import LiteXSoCArgumentParser
|
|
parser = LiteXSoCArgumentParser(description="LiteX SoC on QMTECH 5CEFA2")
|
|
target_group = parser.add_argument_group(title="Target options")
|
|
target_group.add_argument("--build", action="store_true", help="Build bitstream.")
|
|
target_group.add_argument("--load", action="store_true", help="Load bitstream.")
|
|
target_group.add_argument("--sys-clk-freq", default=105e6, help="System clock frequency.")
|
|
target_group.add_argument("--sdram-rate", default="1:1", help="SDRAM Rate (1:1 Full Rate or 1:2 Half Rate).")
|
|
target_group.add_argument("--with-daughterboard", action="store_true", help="Board plugged into the QMTech daughterboard.")
|
|
ethopts = target_group.add_mutually_exclusive_group()
|
|
ethopts.add_argument("--with-ethernet", action="store_true", help="Enable Ethernet support.")
|
|
ethopts.add_argument("--with-etherbone", action="store_true", help="Enable Etherbone support")
|
|
target_group.add_argument("--eth-ip", default="192.168.1.50", type=str, help="Ethernet/Etherbone IP address.")
|
|
target_group.add_argument("--eth-dynamic-ip", action="store_true", help="Enable dynamic Ethernet IP addresses setting.")
|
|
sdopts = target_group.add_mutually_exclusive_group()
|
|
sdopts.add_argument("--with-spi-sdcard", action="store_true", help="Enable SPI-mode SDCard support.")
|
|
sdopts.add_argument("--with-sdcard", action="store_true", help="Enable SDCard support.")
|
|
target_group.add_argument("--with-spi-flash", action="store_true", help="Enable SPI Flash (MMAPed).")
|
|
viopts = target_group.add_mutually_exclusive_group()
|
|
viopts.add_argument("--with-video-terminal", action="store_true", help="Enable Video Terminal (VGA).")
|
|
viopts.add_argument("--with-video-framebuffer", action="store_true", help="Enable Video Framebuffer (VGA).")
|
|
builder_args(parser)
|
|
soc_core_args(parser)
|
|
args = parser.parse_args()
|
|
|
|
soc = BaseSoC(
|
|
sys_clk_freq = int(float(args.sys_clk_freq)),
|
|
with_daughterboard = args.with_daughterboard,
|
|
with_ethernet = args.with_ethernet,
|
|
with_etherbone = args.with_etherbone,
|
|
eth_ip = args.eth_ip,
|
|
eth_dynamic_ip = args.eth_dynamic_ip,
|
|
with_video_terminal = args.with_video_terminal,
|
|
with_video_framebuffer = args.with_video_framebuffer,
|
|
with_spi_flash = args.with_spi_flash,
|
|
sdram_rate = args.sdram_rate,
|
|
**soc_core_argdict(args)
|
|
)
|
|
|
|
if args.with_spi_sdcard:
|
|
soc.add_spi_sdcard()
|
|
if args.with_sdcard:
|
|
soc.add_sdcard()
|
|
|
|
builder = Builder(soc, **builder_argdict(args))
|
|
builder.build(run=args.build)
|
|
|
|
if args.load:
|
|
prog = soc.platform.create_programmer()
|
|
prog.load_bitstream(builder.get_bitstream_filename(mode="sram"))
|
|
|
|
if __name__ == "__main__":
|
|
main()
|