Commit graph

  • 9acc349893
    Merge pull request #516 from josuah/crosslink_nx_uartbone enjoy-digital 2023-08-08 19:28:41 +0200
  • 4362cb23a1
    Fix Digilent Cmod A7 ISSIRAM reading Bayi 2023-08-05 19:56:32 +0200
  • a6b025f7f3
    Fix Digilent Cmod A7 ISSIRAM reading Bayi 2023-08-05 19:56:15 +0200
  • 5412d0e0e9 platforms/crosslink_nx_evn: allow use of UARTBone Josuah Demangeon 2023-08-04 20:47:32 +0200
  • efc15a91a9 global: Use new WaitTimer integrated cast to int. Florent Kermarrec 2023-08-01 14:56:35 +0200
  • f780b5faed
    Merge pull request #513 from josuah/master enjoy-digital 2023-08-01 11:38:23 +0200
  • 538399cb3b lattice_ecp5_evn: update OpenOCD syntax Josuah Demangeon 2023-07-31 14:05:34 +0200
  • cbcf6df26f lattice_ecp5_evn: add_jtagbone flag Josuah Demangeon 2023-07-31 13:53:24 +0200
  • 2d3b81a532 efinix_trion_t120_bga576: Add Ethernet through RGMII PMOD and switch to it. Florent Kermarrec 2023-07-27 11:52:40 +0200
  • c1088befe5 targets/CRG: Add rst signal when missing. Florent Kermarrec 2023-07-26 16:56:27 +0200
  • ace789653f platforms/ti60_f225: Add connector numbering to ease review/schematic comparison. Florent Kermarrec 2023-07-21 09:08:22 +0200
  • ce121663ff targets/uartbone: Update with LiteX change. Florent Kermarrec 2023-07-20 15:42:47 +0200
  • 72a951081a xu8_pe3: Fix clk_p/n on pcie_x8. Florent Kermarrec 2023-07-13 18:10:46 +0200
  • 18a3909a9c global: Switch to litex.gen.genlib.misc. Florent Kermarrec 2023-07-06 22:11:45 +0200
  • 67be3ab677 targets: +x on alchitry_cu and vcu128. Florent Kermarrec 2023-07-06 13:29:35 +0200
  • 34a1ced135
    Merge pull request #510 from Mark1626/master enjoy-digital 2023-07-06 09:08:24 +0200
  • e9335cd67a
    Fix pins in Alchitry Cu platform, add target for Alchitry Cu Mark1626 2023-06-27 21:35:55 +0530
  • 061a768495
    Add Alchitry Cu board Mark1626 2023-06-16 21:36:57 +0530
  • c49a50a934 platform/gsd_butterstick: Add mssing USB comment. Florent Kermarrec 2023-06-16 09:10:47 +0200
  • 28ecb1e9f3 enclustra_mercury_xu8_pe3: Fix pcie_x8 and add GTH banks for pcie_x4/x8. Florent Kermarrec 2023-06-15 17:57:38 +0200
  • 06e8829eb4 platforms/gsd_butterstick: Add default programmer to avoid breaking older designs. Florent Kermarrec 2023-06-14 16:40:35 +0200
  • 58805f037c avnet_aesku40: Expose ethernet/etherbone parameters. Florent Kermarrec 2023-06-13 09:25:27 +0200
  • e4343dcb86
    Merge pull request #509 from iostat/patch-1 enjoy-digital 2023-06-12 08:55:38 +0200
  • 4705a0274e
    Support SPI Flash in Colorlight 5A-75x Ilya Ostrovskiy 2023-06-09 13:43:34 -0400
  • 96175a9986 sitlinv_stlv7325_v2: Add default value to vccio. Florent Kermarrec 2023-06-07 15:00:49 +0200
  • d874d344d2
    Merge pull request #507 from hansfbaier/master enjoy-digital 2023-06-07 14:08:14 +0200
  • 765ee1a3ce sitlinv_stlv7325_v2: VCCIO jumper default factory setting is 3.3V Hans Baier 2023-06-07 09:17:05 +0700
  • b01abce7d5 platform/stlv7325-v2: update VCCIO to fix --with-pcie generation Gabriel Somlo 2023-06-01 16:45:33 -0400
  • 7fc8ca9816
    Merge pull request #506 from sensille/rv901t-spiflash enjoy-digital 2023-05-30 22:36:14 +0200
  • 8a263c18f2 sitlinv_stlv7325: Rename to v1 and update VCCIO to fix --with-pcie generation. Florent Kermarrec 2023-05-30 10:39:20 +0200
  • 4a05e56058 Add spiflash definition to linsn_rv901t board Arne Jansen 2023-05-27 16:20:21 +0200
  • 2ae2dfa6a3
    Add vcu128 target (#497) Chen 2023-05-26 04:25:44 +0800
  • 9362e589ac Add initial Enclustra XU8/PE3 platform definition with Clk/I2C/PCIe/DDR4 and FMC connector definition. Florent Kermarrec 2023-05-25 10:01:19 +0200
  • e59d75f593 qmtech_xc7k325t: Fix build/CI. Florent Kermarrec 2023-05-12 12:19:16 +0200
  • ca6b607255 targets/qmtech: Add missing +x. Florent Kermarrec 2023-05-12 12:09:20 +0200
  • ca6fa654a9
    Merge pull request #504 from hansfbaier/qmtech-xc7k325t enjoy-digital 2023-05-12 12:06:06 +0200
  • 550bc0eee5 add QMTech XC7K325T board, add seven segment display to daughterboard Hans Baier 2023-05-08 05:41:56 +0700
  • 187080228c add qmtech_xc7l325t Hans Baier 2023-05-08 05:17:35 +0700
  • d33cf1a74c mnt_rkx7: Cosmetic cleanups. 2023.04 Florent Kermarrec 2023-05-05 09:48:06 +0200
  • c05c494a82 targets/mnt_rkx7/usb_ohci: Use SoC.bus if SoC does not have a DMA bus. Florent Kermarrec 2023-05-05 09:43:19 +0200
  • 6144966d24
    Merge pull request #501 from mntmn/master enjoy-digital 2023-05-05 09:37:40 +0200
  • 9c222454cc
    Merge pull request #503 from chmousset/add_colorlight_i5a-907 enjoy-digital 2023-05-03 09:50:26 +0200
  • 2bff2d4260 target/stlv7325-v2: tune eth phy delay Gabriel Somlo 2023-05-01 09:28:03 -0400
  • 31c680abf8
    [enh] added option for uartbone Charles-Henri Mousset 2023-04-30 09:42:31 +0200
  • 874532871f
    [enh] taking advantage of pins directly connected Charles-Henri Mousset 2023-04-29 18:28:56 +0200
  • 1202c387bf
    [init] added colorlight i5a-907 support Charles-Henri Mousset 2023-02-28 10:16:23 +0100
  • fd5511f3fd
    [fix] add pmod uart in default config Charles-Henri Mousset 2023-04-30 09:24:15 +0200
  • f5dfdf9abf
    [enh] added doc about JTAG and ext. board Charles-Henri Mousset 2023-04-29 19:39:51 +0200
  • 322cc5d45b
    [init] added colorlight i9+ based on XC7A50 FPGA Charles-Henri Mousset 2023-04-29 18:32:02 +0200
  • 1f6e7f36a5 target/stlv7325-v2: fix typo in eth phy delay Gabriel Somlo 2023-04-28 16:56:37 -0400
  • 1185ff51f1 Initial support for STLV7325 (v2) Kintex-7 board. Gabriel Somlo 2023-04-03 18:12:26 -0400
  • a9e3e3c050 Merge branch 'master' of https://github.com/litex-hub/litex-boards Lukas F. Hartmann 2023-04-25 20:29:11 +0200
  • d160a5ad5d mnt_rkx7: swap RGB red/blue channels Lukas F. Hartmann 2023-04-25 20:28:16 +0200
  • 17a5d3c130 mnt_rkx7: add HDMI terminal, default USB to true Lukas F. Hartmann 2023-04-25 20:27:29 +0200
  • a0594a0708
    Merge pull request #500 from offnaria/master enjoy-digital 2023-04-24 21:04:52 +0200
  • 68bfb325a5
    Fix Memory test failure of Alveo U250 offNaria 2023-04-24 17:35:58 +0900
  • 9322869196
    Merge pull request #495 from vietthanh85/master enjoy-digital 2023-04-24 08:09:25 +0200
  • 0443dd9b41
    Merge pull request #499 from 594rk/patch-1 enjoy-digital 2023-04-24 08:01:49 +0200
  • 03913e2e15
    Update terasic_de10nano.py 594rk 2023-04-23 22:28:00 -0500
  • 340da5393c Fix Memory initialization of Alveo U200 failed #1606 Do Viet Thanh 2023-04-17 18:59:50 +0700
  • f5e51d72bc
    Merge pull request #494 from rtucker85/master Gwenhael Goavec-Merou 2023-04-14 15:48:19 +0200
  • 2ed66317c7 efinix_xyloni_dev_kit: fix build error Richard Tucker 2023-04-14 22:31:21 +1000
  • b8cb2eaa47
    Merge pull request #493 from hansfbaier/deca-ddr3 enjoy-digital 2023-04-11 15:27:02 +0200
  • 5704f31f22 test/test_targets: Excluse enclustra_st1. Florent Kermarrec 2023-04-11 15:24:48 +0200
  • 9cae8cbdd1
    Merge pull request #492 from hansfbaier/enclustra-kx2-connectors enjoy-digital 2023-04-11 15:23:11 +0200
  • 60ac45e80c make DDR3 memory work on the DECA with the UniPHY Hans Baier 2023-04-11 19:59:49 +0700
  • e120b77ef0 enclustra kx2/st1: fix connectors Hans Baier 2023-04-11 10:58:52 +0700
  • c7077880b9 copyright notices on enclustra Hans Baier 2023-04-11 10:23:33 +0700
  • ed947d1b55 enclustra: add baseboard ST1 Hans Baier 2023-04-11 10:19:03 +0700
  • be8ee26b2c enclustra_mercury_kx2: Add ST1 baseboard, part 1 Hans Baier 2023-04-11 05:39:11 +0700
  • 58679262ad enclustra kx2: add connectors Hans Baier 2023-04-10 14:06:42 +0700
  • a8eb0b20c1
    Merge pull request #491 from hansfbaier/stlv7325-hdmi enjoy-digital 2023-04-07 09:06:55 +0200
  • d1e9ad2152
    Merge pull request #490 from hansfbaier/master enjoy-digital 2023-04-07 09:04:26 +0200
  • 52ca60c2ac stlv7325: fix HDMI io standard Hans Baier 2023-04-07 09:50:04 +0700
  • 2f13decc49 stlv7325: make VCCIO configurable Hans Baier 2023-04-07 09:27:03 +0700
  • 566a753dd3 stlv7325: S7PLL is enough Hans Baier 2023-04-07 08:45:06 +0700
  • 7c99f0758d stlv7325: fix video args Hans Baier 2023-04-07 08:35:49 +0700
  • 66cbd27bbf stlv7325: fix video PHY Hans Baier 2023-04-07 08:25:59 +0700
  • abd639ba9e stlv7325: add 2.54mm headers Hans Baier 2023-04-07 08:21:17 +0700
  • 3f85e4ae62 stlv7325: add BTB connectors Hans Baier 2023-04-07 08:09:27 +0700
  • b3e44324d1 sitlinv_stlv7325: add FMC connector Hans Baier 2023-04-07 07:54:05 +0700
  • 5067a2683f sitlinv_stlv7325: add video HDMI, enable compressed bitstream Hans Baier 2023-04-07 07:29:47 +0700
  • 43ce24dcb3 add QMTech 5CEFA5 Cyclone V board support Hans Baier 2023-04-06 18:20:22 +0700
  • ae3d5d599b sqrl_fk33: Remove es1 workaround now that recent version of Vivado support it non-es devices. Florent Kermarrec 2023-04-04 18:11:38 +0200
  • a4925d14f9
    Merge pull request #488 from Icenowy/stlv7325-s7pll enjoy-digital 2023-04-04 08:22:16 +0200
  • e4c1d5725e
    Merge pull request #489 from gsomlo/gls-nexys-video-sata-cleanup enjoy-digital 2023-04-04 08:20:37 +0200
  • 1b9a74bf08 targets/nexys-video: simplify sata configuration Gabriel Somlo 2023-04-03 12:28:12 -0400
  • b1107e94d4 sitlinv_stlv7325: use S7PLL instead of S7MMCM for system clock Icenowy Zheng 2022-11-16 23:25:49 +0800
  • e11d40a249
    Merge pull request #487 from ICE-V-Wireless/master enjoy-digital 2023-04-02 11:44:02 +0200
  • 3424a1e7e0
    Merge pull request #486 from hansfbaier/master enjoy-digital 2023-04-02 11:43:35 +0200
  • 5de47baa44 Add PMOD registrations to ICE-V Wireless Michael Welling 2023-04-02 03:31:55 -0500
  • 66e8553c49
    Merge branch 'litex-hub:master' into master Hans Baier 2023-04-01 12:02:21 +0700
  • f564f80826 terasic_deca: hdmi i2s uses 1.8V, not 3.3V Hans Baier 2023-04-01 08:14:09 +0700
  • 33c4657cc4
    Merge pull request #485 from hansfbaier/master enjoy-digital 2023-03-28 23:16:54 +0200
  • 74c8569a5c DDR3 RAM works on 1.5V, not 1.35V Hans Baier 2023-03-27 15:16:09 +0700
  • 3308b6ddf3 README.md: Update boards. Florent Kermarrec 2023-03-22 10:53:02 +0100
  • aa11138cd2
    Merge pull request #484 from hansfbaier/master enjoy-digital 2023-03-22 10:42:52 +0100
  • 40c8e62b09 use bistream compression on those large devices Hans Baier 2023-03-21 09:25:56 +0700
  • 0125ae4271 Add support for QMTech Artix7 200T FBG484 board Hans Baier 2023-03-20 08:21:36 +0700
  • 98ddb97f5e Support QMTech XC7A75T, XC7A100T core boards Hans Baier 2023-03-18 18:05:10 +0700