Commit graph

  • 1d8f0a9829
    Merge pull request #160 from antmicro/add-netv2-device-choice enjoy-digital 2021-01-28 13:52:28 +0100
  • bd716d956f netv2: add device variant to allow 100T as well Alessandro Comodi 2021-01-28 13:19:53 +0100
  • 9beba7209d Add ECPIX5 components and pinouts (pmod/sata/spiflash) + review IDs from ECPIX5 openocd configuration Guillaume REMBERT 2021-01-28 12:00:28 +0100
  • a2f54864e8
    Merge pull request #1 from litex-hub/master Guillaume REMBERT 2021-01-28 11:56:46 +0100
  • 870a0aadfb
    Merge pull request #157 from kazkojima/colorlight_i5_support enjoy-digital 2021-01-27 12:29:52 +0100
  • aef78831c8 colorlight_i5: Use tx_delay=0 for LiteEthPHYRGMII instead of target specifig bios initialization Kaz Kojima 2021-01-27 18:19:27 +0900
  • 84656a9c2e re-compare and adjust to u250 Sergiu Mosanu 2021-01-26 23:03:09 -0500
  • c3fa0eac8b Add colorlight i5 board support Kaz Kojima 2021-01-27 11:24:44 +0900
  • 5fd04a97ea targets/netv2/pcie: reduce max_pending_requests to 2 to reduce resource usage. Florent Kermarrec 2021-01-26 11:01:51 +0100
  • d256cc8bd6 camlink_4k: disable leds when serial is used (since pin is shared). Florent Kermarrec 2021-01-25 12:19:29 +0100
  • 1e1bec10c4 orangecrab: remove dm_remapping workaround: we are now using Wihsbone/L2 path with VexRiscv-SMP on this board. Florent Kermarrec 2021-01-25 11:52:59 +0100
  • 537f494cbb arrow_sockit: review/harmonize with others boards. Florent Kermarrec 2021-01-25 09:14:46 +0100
  • 4adc1b14c4 platforms/de0nano: use separator for connectors. Florent Kermarrec 2021-01-25 08:58:12 +0100
  • bbaa2fdc98
    Merge pull request #149 from hansfbaier/master enjoy-digital 2021-01-25 08:55:48 +0100
  • 45f538b1d3
    Merge pull request #155 from blakesmith/add_spi_flash enjoy-digital 2021-01-24 21:22:35 +0100
  • 8132f9f65b
    Merge pull request #154 from euryecetelecom/master enjoy-digital 2021-01-24 21:14:58 +0100
  • 72985c72ca
    Merge pull request #153 from Disasm/ecpix5-add-45f enjoy-digital 2021-01-24 21:14:14 +0100
  • cae51c0c24 ULX3S: Make spiflash optionally accessible from the SoC, and bootable Blake Smith 2021-01-07 08:41:20 -0600
  • aa771e9ff4 de0-nano: add connectors Hans Baier 2021-01-23 20:18:15 +0700
  • c9f0745d54 sockit: add board definitions for Terasic SocKit Hans Baier 2020-12-12 18:33:27 +0700
  • 23760e2eae orangecrab/CRGSDRAM: add missing rst signal (to reset from the SoC). Florent Kermarrec 2021-01-22 22:55:02 +0100
  • b386ee5059 Fix SDCard issue when no SDCard inserted in ECPIX5 board. Now enable to detect SDCard presence. https://github.com/litex-hub/linux-on-litex-vexriscv/issues/171 Guillaume REMBERT 2021-01-20 18:02:13 +0100
  • a678672fc9
    ecpix5: add option to select ECP5 device Vadim Kaushan 2021-01-19 01:22:52 +0300
  • bee71da774
    Merge pull request #152 from gsomlo/gls-nexys4ddr-etherbone enjoy-digital 2021-01-16 12:02:54 +0100
  • 5a1447dc5c mention HBM2 Sergiu Mosanu 2021-01-15 17:52:17 -0500
  • 58e25757eb list Alveo U280 Sergiu Mosanu 2021-01-15 12:16:10 -0500
  • e71a4940c0 nexys4ddr: etherbone support Gabriel Somlo 2021-01-15 12:14:40 -0500
  • 7a738245af fix bitstream problem Sergiu Mosanu 2021-01-14 21:53:25 -0500
  • 5a73eb0b6d initiate target and platform for alveo_u280 board Sergiu Mosanu 2021-01-14 18:35:43 -0500
  • 6a5f2f59a6 targets/orangecrab: use new ECP5DDRPHY's cmd_delay to add extra delay on DDR3's Clock/Commands. Florent Kermarrec 2021-01-12 18:56:58 +0100
  • 9ff90eb9fe targets/c10lprefkit: fix default sys-clk-freq. Florent Kermarrec 2021-01-12 16:15:52 +0100
  • 0a7443d273 targets/orangecrab: make usr_btn optional to fix compilation with revision 0.1. Florent Kermarrec 2021-01-08 19:30:37 +0100
  • ae5494d7b6 orangecrab: defaults to USB-ACM UART. Florent Kermarrec 2021-01-08 19:00:58 +0100
  • c6e75122d9 sds1104xe: defaults to Crossover UART. Florent Kermarrec 2021-01-08 19:00:41 +0100
  • ab72f69937 targets/ac701: rename --ethernet-phy to --eth-phy for consistency with others targets. Florent Kermarrec 2021-01-08 18:50:01 +0100
  • 0ee62dd681 add etherbone ip address option for relevant boards Hans Baier 2021-01-08 06:44:15 +0700
  • 869cce2bba targets/colorlight_5a_75x: rename etherbone-ip args to eth-ip. Florent Kermarrec 2021-01-07 09:26:29 +0100
  • c829a47c31 targets/colorlight_5a_75x: Automatically disable Led Chaser when serial is used. Florent Kermarrec 2021-01-07 09:17:28 +0100
  • adbcc81ecf
    Merge pull request #145 from hansfbaier/master enjoy-digital 2021-01-07 09:08:43 +0100
  • a6e867c691
    Merge pull request #144 from gsomlo/gls-genesys2-sdcard enjoy-digital 2021-01-07 08:12:24 +0100
  • d2d17e00a2
    Merge pull request #142 from geertu/master enjoy-digital 2021-01-07 08:11:30 +0100
  • d73bd2f7ce targets/xilinx: add comment on sys_clk to pll.clkin false path. Florent Kermarrec 2021-01-07 08:00:40 +0100
  • 1ac1c6857f targets/xilinx: add false path constraint between sys_clk and pll.clkin. Florent Kermarrec 2021-01-07 00:01:45 +0100
  • 0d69cfa6b0 colorlight: make LEDs optional Hans Baier 2021-01-05 08:03:26 +0700
  • 4bec17e1a7 colorlight: Add option for etherbone ip address Hans Baier 2021-01-05 07:49:44 +0700
  • 2589d9f704 genesys2: add (spi-)sdcard build options Gabriel Somlo 2021-01-04 13:57:21 -0500
  • 4eb0026a69 genesys2: add "rst" and "cd" signals to (spi-)sdcard records Gabriel Somlo 2021-01-04 13:10:13 -0500
  • 4a95b94dbf platforms/ecp5: Fix slewrate configuration Geert Uytterhoeven 2021-01-04 16:57:55 +0100
  • 016d75512f test/test_targets: update, remove RUNNING_ON_TRAVIS. Florent Kermarrec 2021-01-04 14:35:45 +0100
  • fe67766fb7 targets/gensdrphy/halfsdrphy: pass new optional sys_clk_freq (used to compute cl). Florent Kermarrec 2021-01-04 11:38:07 +0100
  • 0e3c03f2f6 mercury_xu5: remove unneeded cmd_latency=0 (now defaulting to 0). Florent Kermarrec 2021-01-04 10:48:34 +0100
  • 5cc49bafbd orangecrab: Run reset_timer with por/48MHz clock domain (sys clock domain is now directly reseted on usr_btn press). Florent Kermarrec 2021-01-04 09:41:47 +0100
  • 1fb24d4c71 orangecrab: Avoid usb clock domain reset on usr_btn press or SoC reset. Florent Kermarrec 2021-01-04 09:04:54 +0100
  • 06cb49af37 targets/arty: add variant support through --variant args. 2020.12 Florent Kermarrec 2020-12-29 18:41:58 +0100
  • 02a81d54e2 targets/ecpix5/eth: set rx_delay to 0ns (tested with netboot on R01). Florent Kermarrec 2020-12-29 16:00:59 +0100
  • 93779ecb95 platforms/colorlight_5a_75b: revert toolchain args. Florent Kermarrec 2020-12-29 14:22:42 +0100
  • f2985f1e71
    Merge pull request #141 from la6m/Colorlight_v8.0 enjoy-digital 2020-12-29 14:20:29 +0100
  • 84098d2de5 targets/qmtech_wukong: submitted target was the platform file, update with target shared in #133. Florent Kermarrec 2020-12-29 14:12:23 +0100
  • b67b18caad qmtech_wukong: review/cleanup platform. Florent Kermarrec 2020-12-29 14:10:49 +0100
  • 3e6b934961 add colorlight v8.0 PCB la6m 2020-12-29 13:52:13 +0100
  • e380f24655 targets/qmtech_wukong: +x. Florent Kermarrec 2020-12-29 13:24:41 +0100
  • 4b721eded7 add QmTech Wukong board support. Shinken Sanada 2020-12-29 13:19:38 +0100
  • 9beaf25822 nexys4ddr: fix eth/int_n pin (B8) and use 4-bit on vga.blue. Florent Kermarrec 2020-12-24 10:15:29 +0100
  • 4162fb9945
    Merge pull request #136 from devobliquezer0/nexys4ddr_vga enjoy-digital 2020-12-24 10:09:32 +0100
  • 2a04c5c74e nexys4ddr: add support for litexvideo VGA Terminal Sahaj Sarup 2020-12-23 01:34:59 +0530
  • 36b7fb1033
    Merge pull request #134 from Disasm/fix-orangecrab enjoy-digital 2020-12-21 08:27:26 +0100
  • f6a106cdf4
    Fix orangecrab target Vadim Kaushan 2020-12-20 01:07:43 +0300
  • e1f9fd1a25 README: update and center banner. Florent Kermarrec 2020-12-17 18:54:11 +0100
  • 00fc2c5166 targets/orangecrab: use new DM remapping capability of LiteDRAM to fix LDM/UDM. Florent Kermarrec 2020-12-16 11:51:33 +0100
  • 6ece97ec59
    Merge pull request #132 from Disasm/fix-de10nano enjoy-digital 2020-12-14 19:39:20 +0100
  • bb58258fd4
    Fix de10nano target Vadim Kaushan 2020-12-14 15:26:29 +0300
  • ec4ccc9fa5 platforms/xcu1525: fix ddram 1/2/3 pinout. Florent Kermarrec 2020-12-11 13:58:11 +0100
  • 519f9449fa targets/sds1104: litex_term now directly supports crossover uart. Florent Kermarrec 2020-12-10 13:56:01 +0100
  • 3463e3be49
    Merge pull request #131 from antmicro/sync_arty enjoy-digital 2020-12-07 21:43:34 +0100
  • 18337cdf25 targets/arty: sync with litex repository Robert Winkler 2020-12-04 10:28:01 +0100
  • 0b8a01f929
    Merge pull request #130 from antmicro/fix-zybo-clock-pin enjoy-digital 2020-12-07 17:13:40 +0100
  • f66860c201 zybo_z7: fix clock pin constraint Alessandro Comodi 2020-12-07 16:46:20 +0100
  • 26d3b57243
    Merge pull request #129 from geertu/master enjoy-digital 2020-12-04 14:53:48 +0100
  • 8e5f955e4e targets/orangecrab: Fix --sdram-device help text Geert Uytterhoeven 2020-12-04 14:34:01 +0100
  • fe563baec7 targets/fomu: modification to ValentyUSB no longer required. Florent Kermarrec 2020-11-27 19:40:45 +0100
  • 5a4e28d47d target/usb_acm: switch git clone to litex-hub/valentyusb repo (up to date with LiteX). Florent Kermarrec 2020-11-27 18:53:45 +0100
  • 20903da54a
    Merge pull request #128 from trabucayre/redpitaya_support enjoy-digital 2020-11-26 08:30:23 +0100
  • 8d1095224f add support for redpitaya14/16 Gwenhael Goavec-Merou 2020-11-26 06:54:11 +0100
  • b3315bd309
    Merge pull request #127 from daveshah1/nexus-toolchain enjoy-digital 2020-11-25 19:22:28 +0100
  • 11fa5c34ac nexus: Allow selection of toolchain David Shah 2020-11-25 09:45:25 +0000
  • b9d9af3183 ci: switch from Travis CI to Github Actions. Florent Kermarrec 2020-11-24 14:01:23 +0100
  • 159a0c751c targets/colorlight_5a_75x: update instructions and LiteEthPHYRGMII's tx_delay (required with LiteEth fixes). Florent Kermarrec 2020-11-23 12:30:36 +0100
  • 03bb929f27 colorlight_5a_75x: add LedChaser. Florent Kermarrec 2020-11-23 10:14:20 +0100
  • d18deef10d colorlight_5a_75x: switch prog to FT232 based programmer (ex: JTAG HS2). Florent Kermarrec 2020-11-23 10:13:23 +0100
  • ee50c3e8ae
    Merge pull request #124 from antmicro/jboc/mercury-xu5 enjoy-digital 2020-11-20 19:37:41 +0100
  • ce38cff41d mercury_xu5: reduce cmd_latency to fix problems with DRAM leveling Jędrzej Boczar 2020-11-20 15:31:47 +0100
  • a2f3add24e
    Merge pull request #123 from teknoman117/litefury enjoy-digital 2020-11-20 08:44:27 +0100
  • 389b623fe2 targets/litefury: new target Nathaniel R. Lewis 2020-11-19 20:31:13 -0800
  • 49e1c34dfd targets/acorn_cle_215: add SATA. Florent Kermarrec 2020-11-18 19:14:18 +0100
  • 778ce53865 targets/xcu1525: add SATA. Florent Kermarrec 2020-11-17 15:27:42 +0100
  • 27e19644f4 targets/kcu105: add SATA. Florent Kermarrec 2020-11-16 18:44:08 +0100
  • 27f60b2e93 add initial Siglent SDS1104X-E support (Ethernet & DDR3 validated). Florent Kermarrec 2020-11-13 12:16:59 +0100
  • d42af3ea19 targets: add --sys-clk-freq support to all targets. Florent Kermarrec 2020-11-12 18:07:28 +0100
  • 72afb95329 targets: create platform on BaseSoC for all targets (consitency). Florent Kermarrec 2020-11-12 16:57:31 +0100
  • 843e724e3d targets/pcie: simplify using new LiteX's add_pcie method and enable it on all devices supported by LitePCIe. Florent Kermarrec 2020-11-12 16:39:42 +0100