Commit graph

  • 673676e3cb digilent_arty_a7: Switch to VivadoProgrammer. Florent Kermarrec 2022-03-01 10:48:22 +0100
  • e16e5e0591 digilent_arty_z7: Fix add_period_constraint. Florent Kermarrec 2022-03-01 10:30:14 +0100
  • 1320f3bd23
    Merge pull request #357 from DaveBerkeley/colorlight_i9 enjoy-digital 2022-03-01 10:07:55 +0100
  • a19c03fa55 targets: Switch to generic/portable HyperRAM core from LiteX. Florent Kermarrec 2022-03-01 09:10:19 +0100
  • c9d009c735 Add ColorLight i9 v7.2 Dave Berkeley 2022-02-28 14:08:49 +0000
  • 11dfe225fa
    Merge pull request #356 from fjullien/add_mipi_tx enjoy-digital 2022-02-25 16:53:11 +0100
  • c54e92c47d efinix: add MIPI TX to platform Ti60 Franck Jullien 2022-02-25 15:15:14 +0100
  • 2311db18f8 add initial support for kröte fpga board inc 2022-02-25 14:22:19 +0100
  • 1623ba5942 targets/stlv7325: Reduce sys_clk_freq to 100MHz. Florent Kermarrec 2022-02-25 09:04:07 +0100
  • 872113e1cc stlv7325: Add SDCard support. Florent Kermarrec 2022-02-24 18:02:43 +0100
  • a08f346d90 stlv7325: Add Etherbone support (untested). Florent Kermarrec 2022-02-24 17:43:53 +0100
  • b1550f006a stlv3225: Minor Review/Cleanup, switch to JTAG HS2 programmer. Florent Kermarrec 2022-02-24 17:17:08 +0100
  • 174d958ca7 Initial support for STLV7325 Kintex-7 board. Andrew Gillham 2022-02-02 11:16:48 -0600
  • 6661947d96
    Merge pull request #354 from madscientist159/master enjoy-digital 2022-02-23 18:06:08 +0100
  • 1717af68ac targets/sqrl_acorn/ddr3: Disable write_latency_calibration. Florent Kermarrec 2022-02-23 10:38:01 +0100
  • 16b9e100ba
    Merge pull request #353 from sergachev/zcu216 enjoy-digital 2022-02-22 18:57:31 +0100
  • ae4b3c0938 Add initial support for RCS Arctic Tern boards Raptor Engineering Development Team 2022-02-21 12:20:37 -0600
  • 85397818d9 add Xilinx ZCU216 support Ilia Sergachev 2022-02-21 19:14:13 +0100
  • 7d84e6e863 efinix_titanium_ti60_t225: Add SPI/Native SDCard support. Florent Kermarrec 2022-02-21 10:01:18 +0100
  • df36cdbcc9 siglent_sds1104xe: Switch back to native DRAM width (now possible with Nax). Florent Kermarrec 2022-02-18 11:47:08 +0100
  • d85f88f42a siglent_sds1104xe: Reduce DRAM's width to 16-bit for now (to use NaxRiscv). Florent Kermarrec 2022-02-16 17:59:27 +0100
  • 08a79fa3ac lattice_ecp5_vip: Minor cleanups, fix CI. Florent Kermarrec 2022-02-15 10:58:38 +0100
  • 30afe26669
    Merge pull request #348 from hubmartin/ecp5-vip enjoy-digital 2022-02-15 08:53:57 +0100
  • 2b1dac0f96
    Merge pull request #350 from trabucayre/axu2cga_software enjoy-digital 2022-02-15 08:21:50 +0100
  • 896884dd21
    Merge branch 'master' into axu2cga_software enjoy-digital 2022-02-15 08:21:29 +0100
  • 6bbf8c8268
    Merge pull request #351 from sergachev/litex_baseboard_openocd enjoy-digital 2022-02-15 08:11:41 +0100
  • 3f58df9974 platforms/targets: Fix typos. Florent Kermarrec 2022-02-14 17:26:46 +0100
  • b53b79821e platforms: Expose toolchain parameter on all platforms to ease switching to alternative/open-source toolchains. Florent Kermarrec 2022-02-14 11:35:08 +0100
  • 12b91eccdc digilent_arty: Remove yosys+nextpnr INTERNAL_VREF constraint skip (now directly done in LiteX). Florent Kermarrec 2022-02-14 10:45:29 +0100
  • 5cd1d7eaec add openocd config for litex acorn baseboard Ilia Sergachev 2022-02-13 16:44:40 +0100
  • 5eca41ac73 targets/alinx_axu2cga: adding PS software support (inspired by xilinx_kv260) Gwenhael Goavec-Merou 2022-02-12 18:23:19 +0100
  • 50654f1b7b platforms/alinx_axu2cga: add zynqmp PS configuration params Gwenhael Goavec-Merou 2022-02-12 18:19:55 +0100
  • d672d9a9b1 targets: s/alinx_axu2gca/alinx_axu2cga/gc Gwenhael Goavec-Merou 2022-02-12 18:12:45 +0100
  • c2cd4410df
    Code cleanup, add copyright hubmartin 2022-02-12 17:50:07 +0100
  • c0e671919d sqrl_acorn: Downgrade to SATA Gen1 for now (allow lower sys_clk_freq and enough for current tests). Florent Kermarrec 2022-02-09 19:10:12 +0100
  • d9b77c6f25 digilent_arty: Add --flash support. Florent Kermarrec 2022-02-09 17:51:56 +0100
  • 4894926c40 xilinx_kv260: +x. Florent Kermarrec 2022-02-09 16:01:51 +0100
  • 0c010d3d79
    Merge pull request #347 from hplp/master enjoy-digital 2022-02-09 07:44:36 +0100
  • 27b03df886
    Add Lattice ECP5 VIP board + HDMI output board support hubmartin 2022-02-08 21:47:58 +0100
  • 27a7534568 Merge branch 'master' of github.com:hplp/litex-boards Sergiu Mosanu 2022-02-08 12:56:03 -0500
  • 450a26f395 Merge branch 'master' of https://github.com/litex-hub/litex-boards Sergiu Mosanu 2022-02-08 12:55:09 -0500
  • 7ed633dc4b add guideline for serial interface Sergiu Mosanu 2022-02-08 12:54:34 -0500
  • 0d2336768d
    Merge branch 'litex-hub:master' into master Sergiu Mosanu 2022-02-08 12:20:35 -0500
  • 5a0f69502b enable use of HBM for linux boot Sergiu Mosanu 2022-02-08 12:18:38 -0500
  • 420b9cd68d
    Merge pull request #346 from Arusekk/patch-1 enjoy-digital 2022-02-08 16:42:33 +0100
  • 5d52bc5461
    Fix seven_seg pin assignment in DE1-SoC Arusekk 2022-02-08 09:03:53 +0100
  • 18e8bec9d4 xilinx/kv260: Minor cleanup and add Build/Use instructions (from PR). Florent Kermarrec 2022-02-07 08:12:43 +0100
  • 8621700916
    Merge pull request #345 from sergachev/feature/xilinx_kv260 enjoy-digital 2022-02-07 07:53:55 +0100
  • 365b37b31c
    Merge pull request #344 from benstobbs/patch-1 enjoy-digital 2022-02-07 07:45:41 +0100
  • 1d8c3789af add Xilinx KV260 support Ilia Sergachev 2022-02-06 13:54:00 +0100
  • 617fa26acd
    Add 85F to help for orangecrab device Ben Stobbs 2022-02-06 10:36:58 +0000
  • 346623fd06 trellisboard: Rename Video I2C to videoi2c. Florent Kermarrec 2022-02-04 09:26:31 +0100
  • 6d4fe82179 trellisboard: Rename hdmi_i2c to i2c (to have access to i2c_scan in the BIOS). Florent Kermarrec 2022-02-02 11:08:21 +0100
  • 0522d8b0c5 trellisboard: Update i2c.add_init call. Florent Kermarrec 2022-02-02 10:59:54 +0100
  • 7f4d464f1b trellisboard: Add Video Terminal/Framebuffer support and use new I2C init feature to automatically configure TP410 at startup. Florent Kermarrec 2022-02-02 09:51:51 +0100
  • 53007b3cb6 ignore ip directory and files Sergiu Mosanu 2022-02-01 14:24:48 -0500
  • 4251cfa865 terasic_de0nano: Add Build/Use instructions with JTAG-UART. Florent Kermarrec 2022-02-01 15:58:34 +0100
  • 4d45611935 targets: Replace JTAG Atlantic (Deprecated) with JTAG-UART. Florent Kermarrec 2022-02-01 11:30:26 +0100
  • 4281beac18
    Merge pull request #343 from jevinskie/jev/deca-eth enjoy-digital 2022-01-31 16:23:17 +0100
  • 9144cb44fb
    Merge branch 'master' into jev/deca-eth enjoy-digital 2022-01-31 16:22:58 +0100
  • 3a6cc889d4
    Merge pull request #341 from jevinskie/jev/altera-jtag enjoy-digital 2022-01-31 16:07:18 +0100
  • fbd424fc48 DECA: Add Ethernet and Etherbone support Jevin Sweval 2022-01-27 16:56:21 -0800
  • 9e5224ca49 Add JTAGbone support to Terasic DECA Jevin Sweval 2022-01-27 14:12:52 -0800
  • 597e5ca142
    Merge pull request #340 from trabucayre/digilent_z7_yosys-nextpnr_support enjoy-digital 2022-01-26 21:20:19 +0100
  • dd134a4b7d digilent arty z7: allows toolchain selection (PL only) Gwenhael Goavec-Merou 2022-01-26 07:30:06 +0100
  • 74395ca80b digilent_nexyx_video: Add default toolchain value to CRG (to avoid breaking existing designs). Florent Kermarrec 2022-01-25 16:13:57 +0100
  • 624572f2e9 alinx_axu2gca: Review and do minor cosmetic changes. Florent Kermarrec 2022-01-25 14:58:23 +0100
  • 367222c455
    Merge pull request #339 from trabucayre/alinx_axu2cga enjoy-digital 2022-01-25 14:54:46 +0100
  • 537f04a13d alinx_axu2gca: new board Gwenhael Goavec-Merou 2022-01-25 07:20:19 +0100
  • 621d45cd9e digilent_arty: Review and improve CRG to avoid specific yosys+nextpnr code. Florent Kermarrec 2022-01-24 19:16:07 +0100
  • c2276c1e6d
    Merge pull request #338 from suarezvictor/master enjoy-digital 2022-01-24 19:02:59 +0100
  • 1abb03e514 tang_nano_4k: Review/Cleanup: - Revert abstractions on clk_name/period: Too much abstraction to avoid duplications makes the code more difficult to read. ex: - When constraining clk27, frequency is already in the name. - In the target, we want to know we are using clk27 as the main clk. - We need a default sys_clk_freq for project only importing BaseSoC. - Revert SPI Flash import (for consistency with other targets). - Keep VexRiscv as default CPU since this target is able to run it and also for consistency with other targets. Florent Kermarrec 2022-01-24 18:46:51 +0100
  • e357eb6d8f
    Merge pull request #337 from sergachev/tang_nano_4k_emcu enjoy-digital 2022-01-24 18:36:10 +0100
  • cc1b46f106 tang_nano_9k: Fix HyperRAM integration. Florent Kermarrec 2022-01-24 18:35:12 +0100
  • db77ea5c7a Add tweaks to Arty board to support yosys+nextpnr toolchain Victor Suarez Rovere 2022-01-24 02:06:34 -0300
  • f078e55bb1 tang nano 4k: fix removed default_clk_period, fix do_finalize signature Ilia Sergachev 2022-01-23 16:47:20 +0100
  • 6238052b10 tang nano 4k: disable spi flash with gowin emcu, cleanup Ilia Sergachev 2022-01-23 16:10:46 +0100
  • 6c81fc708c tang nano 4k: add memory regions, set default cpu Ilia Sergachev 2022-01-23 13:05:51 +0100
  • 787f44e7d9
    Merge pull request #336 from tcal-x/cmod-a7-flash enjoy-digital 2022-01-23 08:36:49 +0100
  • f9ac599d9b
    Merge pull request #335 from Icenowy/tang9k_psram enjoy-digital 2022-01-23 08:34:18 +0100
  • 6567af6f49 Digilent CMOD A7: add flash support. Tim Callahan 2022-01-22 18:50:12 -0800
  • f533e7f8ba sipeed_tang_nano_9k: enable copackaged PSRAM Icenowy Zheng 2022-01-23 03:17:57 +0800
  • e35b9b439f platforms/sipeed_tang_nano_9k: Fix copyrights and remove board diagram/description of the 4k. Florent Kermarrec 2022-01-22 15:55:36 +0100
  • 999dbd572f
    Merge pull request #334 from Icenowy/tang9k enjoy-digital 2022-01-22 15:49:08 +0100
  • 6f5dcd9d85
    Merge pull request #333 from vacajk/master enjoy-digital 2022-01-22 15:48:30 +0100
  • e699c377a5 sipeed_tang_nano_9k: new board Icenowy Zheng 2022-01-22 11:45:49 +0800
  • e9d4d9066a xilinx_zcu106: add DDR4 interface and fix reset error vacajk 2022-01-22 03:08:21 +0800
  • b8aad4b030
    Merge pull request #332 from tcal-x/prog-cmod-a7 enjoy-digital 2022-01-21 08:05:22 +0100
  • 95766915b3
    Merge pull request #330 from sergachev/fix/libeos_path enjoy-digital 2022-01-21 08:04:48 +0100
  • e0c4c0fe39 Add openocd programmer for Digilent CMOD A7. Tim Callahan 2022-01-20 20:54:03 -0800
  • 0e91013fc7 quickfeather: fix path to libeos library when board script called not from its directory; fix wget redownloads; add libeos to gitignore Ilia Sergachev 2022-01-20 18:43:59 +0100
  • 5f2ccb2d32 targets: Switch from bridge to crossover. Florent Kermarrec 2022-01-19 17:02:41 +0100
  • abb54cebb3 trenz_c10lprefkit: Add Etherbone support. Florent Kermarrec 2022-01-19 14:46:29 +0100
  • 1ce978806d
    Merge pull request #328 from sergachev/fix/zedboard_software enjoy-digital 2022-01-19 10:05:49 +0100
  • f11106e9c5 targets/digilent_cmod_a7: Simplify/Cleanup. Florent Kermarrec 2022-01-19 10:03:20 +0100
  • f8e3cc5361
    Merge pull request #327 from bl0x/digilent_cmod_a7 enjoy-digital 2022-01-19 09:59:44 +0100
  • bbf13f4439 zedboard: remove a hack Ilia Sergachev 2022-01-19 02:41:11 +0100
  • 4f4d47dcdd zedboard: correct memory map Ilia Sergachev 2022-01-19 02:40:54 +0100
  • fccb952c4b target: Remove ident_version=True no longer required. Florent Kermarrec 2022-01-18 17:13:02 +0100
  • 7114911cea targets: --no-ident-version is now directly provided by LiteX, remove it on targets implementing it. Florent Kermarrec 2022-01-18 16:47:38 +0100